Gå til innhold

Anbefalte innlegg

Nytt G34 kort fra USA http://www.wiredzone...~10020000~0.htm vil havne på ca. 5330 NOK inkl moms og frakt. Men, hvis du spør hos Nextron så får du det for omtrent samme pris + frakt. og da har du 5 år reklamasjon og 2 år garanti.

 

Et brukt 4P G34 hovedkort bør ikke koste mer enn max 3 - 4.000 NOK. Et nytt 4P X9 hovedkort (E5-46xx CPU) koster nytt mellom 8 - 10.000 NOK. Brukt bør ikke ligge høyere enn 5 - 6.000. NOK.

 

NB. Til dere som er nye på 4P hovedkort! Disse kortene er generelt helt greie å jobbe med, men vær veldig nøye med installasjon av CPU(ene). Det er utrolig lett å skade pinnene i cpu-sokkelen, og her er det hele fire av dem. Hvis dere handler ES CPUer på ebay så sjekk steppingen, som bør være minimum C0, helst C1 eller bedre. Ikke mix forskjellige ES CPU steppinger. Retail CPUer takler vanlig desktop minne, men ES chipper krever som regel Reg/Ecc RAM anbefalt av hovedkortprodusenten. Hvis en ny rigg med ES chipper ikke vil boote så skyldes det som regel minnet, eller skade i CPU-sokkelen. 4P hovedkort kan kjøre fint med 1, 2,3 eller 4 CPUer installert.

Endret av -alias-
  • Liker 1
Lenke til kommentar
Videoannonse
Annonse

Project 7647

Base Credit: 2250

Estimated Credit: 18821

Estimated PPD: 20662

Estimated TPF: 13 mins 07 secs

FAHCore: 0xa4

Tok en BIOS-oppdatering og kjørte auto OC tuner i BIOSen etterpå, får nå TPF på 11 mins og 25 sec. Men alt jeg kan sjekke sier fortsatt at CPU kjører på 3,5? Noen som har peiling på overklokking med Asus P8Z68V-PRO under linux? Er kjøpt av en av dere storfolderne her inne, forresten.

 

red: Viser seg at de vanlige verktøyene i linux ikke viser klokken prosessoren ligger på når den er overklokket. Med en TPF nå på 9min 15, har noe helt klart. skjedd.

 

Men er PPD-en på mange av prosjektene rett og slett dårlige på en "aldrende" 2700K? Ligger på 4.4GHz nå. (Skrev 2600K tidligere, det var feil.) Med en klokk på 4,4&Hz burde jeg da få mer enn 25k PPD?

 

En temp på 66 grader er vel ikke ille det da? Tenker stort sett at alt overklokket under 70 grader på full load er greit nok.

Endret av NgZ
Lenke til kommentar

Tror ikke ting er helt på stell, kjører på 2 datamaskiner nå.. Stasjonæren har stått å gått i over 24 timer nå. Progress står på 2 %.. Har kjørt på full hele tida, og cpu skjermkort har vert maksa.

 

Og på brukeren min online står det total score 0, og finner meg ikke i lista over medlemmer på hw.no teamet.. er jeg helt på bærtur nå?

 

Kunne du tatt en kopi av loggen og postet her (gjerne inni en spoiler).

 

Hvordan går tingene på den andre maskinen?

Lenke til kommentar

Kunne du tatt en kopi av loggen og postet her (gjerne inni en spoiler).

 

Hvordan går tingene på den andre maskinen?

 

Her er logg..

 

 

22:21:31:Saving configuration to config.xml

22:21:31:<config>

22:21:31: <!-- Folding Slot Configuration -->

22:21:31: <power v='light'/>

22:21:31:

22:21:31: <!-- Network -->

22:21:31: <proxy v=':8080'/>

22:21:31:

22:21:31: <!-- User Information -->

22:21:31: <passkey v='********************************'/>

22:21:31: <team v='37651'/>

22:21:31: <user v='iNzzane'/>

22:21:31:

22:21:31: <!-- Folding Slots -->

22:21:31: <slot id='0' type='GPU'/>

22:21:31: <slot id='1' type='CPU'/>

22:21:31:</config>

22:47:05:FS01:Shutting core down

22:47:05:WU01:FS00:Starting

22:47:05:WU01:FS00:Running FahCore: "C:\Program Files (x86)\FAHClient/FAHCoreWrapper.exe" C:/Users/Christian/AppData/Roaming/FAHClient/cores/www.stanford.edu/~pande/Win32/AMD64/NVIDIA/G80/Core_11.fah/FahCore_11.exe -dir 01 -suffix 01 -version 703 -lifeline 1744 -checkpoint 15 -gpu 0 -gpu-vendor nvidia

22:47:05:WU01:FS00:Started FahCore on PID 3660

22:47:05:WU01:FS00:Core PID:324

22:47:05:WU01:FS00:FahCore 0x11 started

22:47:05:WU01:FS00:0x11:

22:47:05:WU01:FS00:0x11:*------------------------------*

22:47:05:WU01:FS00:0x11:Folding@Home GPU Core

22:47:05:WU01:FS00:0x11:Version 1.31 (Tue Sep 15 10:57:42 PDT 2009)

22:47:05:WU01:FS00:0x11:

22:47:05:WU01:FS00:0x11:Compiler : Microsoft ® 32-bit C/C++ Optimizing Compiler Version 14.00.50727.762 for 80x86

22:47:05:WU01:FS00:0x11:Build host: amoeba

22:47:05:WU01:FS00:0x11:Board Type: Nvidia

22:47:05:WU01:FS00:0x11:Core :

22:47:05:WU01:FS00:0x11:Preparing to commence simulation

22:47:05:WU01:FS00:0x11:- Looking at optimizations...

22:47:05:WU01:FS00:0x11:DeleteFrameFiles: successfully deleted file=01/wudata_01.ckp

22:47:05:WU01:FS00:0x11:- Created dyn

22:47:05:WU01:FS00:0x11:- Files status OK

22:47:05:WU01:FS00:0x11:Error: Missing work file=<>

22:47:05:WU01:FS00:0x11:

22:47:05:WU01:FS00:0x11:Folding@home Core Shutdown: MISSING_WORK_FILES

22:47:06:WARNING:WU01:FS00:FahCore returned: MISSING_WORK_FILES (116 = 0x74)

22:47:06:WARNING:WU01:FS00:Fatal error, dumping

22:47:06:WU01:FS00:Sending unit results: id:01 state:SEND error:DUMPED project:10501 run:326 clone:0 gen:1374 core:0x11 unit:0x00000b046652eda54b6ea93d00007f57

22:47:06:WU01:FS00:Uploading 632B to 171.67.108.21

22:47:06:WU01:FS00:Connecting to 171.67.108.21:8080

22:47:06:WU02:FS00:Connecting to assign-GPU.stanford.edu:80

22:47:06:WARNING:WU01:FS00:Exception: Failed to send results to work server: 10001: Server responded: HTTP_BAD_REQUEST

22:47:06:WU01:FS00:Trying to send results to collection server

22:47:06:WU01:FS00:Uploading 632B to 171.67.108.26

22:47:06:WU01:FS00:Connecting to 171.67.108.26:8080

22:47:07:WU02:FS00:News: Welcome to Folding@Home

22:47:07:WU02:FS00:Assigned to work server 171.67.108.21

22:47:07:WU02:FS00:Requesting new work unit for slot 00: READY gpu:0:G92 [GeForce 9800 GTX] from 171.67.108.21

22:47:07:WU02:FS00:Connecting to 171.67.108.21:8080

22:47:07:WU02:FS00:Downloading 61.98KiB

22:47:08:WU02:FS00:Download complete

22:47:08:WU02:FS00:Received Unit: id:02 state:DOWNLOAD error:NO_ERROR project:10501 run:306 clone:0 gen:1217 core:0x11 unit:0x00000ba66652eda54b6ea90800007794

22:47:08:WU02:FS00:Starting

22:47:08:WU02:FS00:Running FahCore: "C:\Program Files (x86)\FAHClient/FAHCoreWrapper.exe" C:/Users/Christian/AppData/Roaming/FAHClient/cores/www.stanford.edu/~pande/Win32/AMD64/NVIDIA/G80/Core_11.fah/FahCore_11.exe -dir 02 -suffix 01 -version 703 -lifeline 1744 -checkpoint 15 -gpu 0 -gpu-vendor nvidia

22:47:08:WU02:FS00:Started FahCore on PID 6404

22:47:08:WU02:FS00:Core PID:3940

22:47:08:WU02:FS00:FahCore 0x11 started

22:47:09:WU02:FS00:0x11:

22:47:09:WU02:FS00:0x11:*------------------------------*

22:47:09:WU02:FS00:0x11:Folding@Home GPU Core

22:47:09:WU02:FS00:0x11:Version 1.31 (Tue Sep 15 10:57:42 PDT 2009)

22:47:09:WU02:FS00:0x11:

22:47:09:WU02:FS00:0x11:Compiler : Microsoft ® 32-bit C/C++ Optimizing Compiler Version 14.00.50727.762 for 80x86

22:47:09:WU02:FS00:0x11:Build host: amoeba

22:47:09:WU02:FS00:0x11:Board Type: Nvidia

22:47:09:WU02:FS00:0x11:Core :

22:47:09:WU02:FS00:0x11:Preparing to commence simulation

22:47:09:WU02:FS00:0x11:- Looking at optimizations...

22:47:09:WU02:FS00:0x11:DeleteFrameFiles: successfully deleted file=02/wudata_01.ckp

22:47:09:WU02:FS00:0x11:- Created dyn

22:47:09:WU02:FS00:0x11:- Files status OK

22:47:09:WU02:FS00:0x11:- Expanded 62958 -> 336763 (decompressed 534.9 percent)

22:47:09:WU02:FS00:0x11:Called DecompressByteArray: compressed_data_size=62958 data_size=336763, decompressed_data_size=336763 diff=0

22:47:09:WU02:FS00:0x11:- Digital signature verified

22:47:09:WU02:FS00:0x11:

22:47:09:WU02:FS00:0x11:Project: 10501 (Run 306, Clone 0, Gen 1217)

22:47:09:WU02:FS00:0x11:

22:47:09:WU02:FS00:0x11:Assembly optimizations on if available.

22:47:09:WU02:FS00:0x11:Entering M.D.

22:47:14:WU00:FS01:FahCore returned: INTERRUPTED (102 = 0x66)

22:47:14:WU00:FS01:Starting

22:47:14:WARNING:WU00:FS01:Changed SMP threads from 2 to 4 this can cause some work units to fail

22:47:14:WU00:FS01:Running FahCore: "C:\Program Files (x86)\FAHClient/FAHCoreWrapper.exe" C:/Users/Christian/AppData/Roaming/FAHClient/cores/www.stanford.edu/~pande/Win32/AMD64/Core_a4.fah/FahCore_a4.exe -dir 00 -suffix 01 -version 703 -lifeline 1744 -checkpoint 15 -np 4

22:47:14:WU00:FS01:Started FahCore on PID 1396

22:47:14:WU00:FS01:Core PID:3844

22:47:14:WU00:FS01:FahCore 0xa4 started

22:47:15:WU02:FS00:0x11:Tpr hash 02/wudata_01.tpr: 2962507630 4276244391 2471906633 3618587897 4224266303

22:47:15:WU02:FS00:0x11:

22:47:15:WU02:FS00:0x11:Calling fah_main args: 14 usage=100

22:47:15:WU02:FS00:0x11:

22:47:15:WU00:FS01:0xa4:

22:47:15:WU00:FS01:0xa4:*------------------------------*

22:47:15:WU00:FS01:0xa4:Folding@Home Gromacs GB Core

22:47:15:WU00:FS01:0xa4:Version 2.27 (Dec. 15, 2010)

22:47:15:WU00:FS01:0xa4:

22:47:15:WU00:FS01:0xa4:Preparing to commence simulation

22:47:15:WU00:FS01:0xa4:- Looking at optimizations...

22:47:15:WU00:FS01:0xa4:- Files status OK

22:47:15:WU00:FS01:0xa4:- Expanded 2053771 -> 5365960 (decompressed 261.2 percent)

22:47:15:WU00:FS01:0xa4:Called DecompressByteArray: compressed_data_size=2053771 data_size=5365960, decompressed_data_size=5365960 diff=0

22:47:15:WU00:FS01:0xa4:- Digital signature verified

22:47:15:WU00:FS01:0xa4:

22:47:15:WU00:FS01:0xa4:Project: 7808 (Run 7, Clone 323, Gen 27)

22:47:15:WU00:FS01:0xa4:

22:47:15:WU00:FS01:0xa4:Assembly optimizations on if available.

22:47:15:WU00:FS01:0xa4:Entering M.D.

22:47:16:WU02:FS00:0x11:Working on Protein

22:47:16:WU02:FS00:0x11:Run: exception thrown during GuardedRun

22:47:16:WU02:FS00:0x11:Run: exception thrown in GuardedRun -- Gromacs cannot continue further.

22:47:16:WU02:FS00:0x11:Going to send back what have done -- stepsTotalG=0

22:47:16:WU02:FS00:0x11:Work fraction=0.0000 steps=0.

22:47:20:WU02:FS00:0x11:logfile size=0 infoLength=0 edr=0 trr=23

22:47:20:WU02:FS00:0x11:+ Opened results file

22:47:20:WU02:FS00:0x11:- Writing 633 bytes of core data to disk...

22:47:20:WU02:FS00:0x11:Done: 121 -> 123 (compressed to 101.6 percent)

22:47:20:WU02:FS00:0x11: ... Done.

22:47:20:WU02:FS00:0x11:DeleteFrameFiles: successfully deleted file=02/wudata_01.ckp

22:47:20:WU02:FS00:0x11:

22:47:20:WU02:FS00:0x11:Folding@home Core Shutdown: UNSTABLE_MACHINE

22:47:21:WU00:FS01:0xa4:Using Gromacs checkpoints

22:47:21:WU00:FS01:0xa4:Mapping NT from 4 to 4

22:47:27:WARNING:WU01:FS00:WorkServer connection failed on port 8080 trying 80

22:47:27:WU01:FS00:Connecting to 171.67.108.26:80

22:47:50:WARNING:WU01:FS00:Exception: Failed to send results to work server: 10001: Server responded: HTTP_BAD_REQUEST

22:47:50:WU01:FS00:Trying to send results to collection server

22:47:50:WU01:FS00:Uploading 632B to 171.67.108.26

22:47:50:WU01:FS00:Connecting to 171.67.108.26:8080

22:48:06:Saving configuration to config.xml

22:48:06:<config>

22:48:06: <!-- Folding Slot Configuration -->

22:48:06: <power v='full'/>

22:48:06:

22:48:06: <!-- Network -->

22:48:06: <proxy v=':8080'/>

22:48:06:

22:48:06: <!-- User Information -->

22:48:06: <passkey v='********************************'/>

22:48:06: <team v='37651'/>

22:48:06: <user v='iNzzane'/>

22:48:06:

22:48:06: <!-- Folding Slots -->

22:48:06: <slot id='0' type='GPU'/>

22:48:06: <slot id='1' type='CPU'/>

22:48:06:</config>

22:48:11:WARNING:WU01:FS00:WorkServer connection failed on port 8080 trying 80

22:48:11:WU01:FS00:Connecting to 171.67.108.26:80

22:48:17:WU00:FS01:0xa4:Resuming from checkpoint

22:48:17:WU00:FS01:0xa4:Verified 00/wudata_01.log

22:48:17:WU00:FS01:0xa4:Verified 00/wudata_01.trr

22:48:17:WU00:FS01:0xa4:Verified 00/wudata_01.xtc

22:48:17:WU00:FS01:0xa4:Verified 00/wudata_01.edr

22:48:18:WU00:FS01:0xa4:Completed 7810 out of 1500000 steps (0%)

22:48:19:WARNING:WU00:FS01:Detected clock skew (1 mins 04 secs), adjusting time estimates

22:48:49:WU01:FS00:Sending unit results: id:01 state:SEND error:DUMPED project:10501 run:326 clone:0 gen:1374 core:0x11 unit:0x00000b046652eda54b6ea93d00007f57

22:48:49:WU01:FS00:Uploading 632B to 171.67.108.21

22:48:49:WU01:FS00:Connecting to 171.67.108.21:8080

22:48:50:WARNING:WU01:FS00:Exception: Failed to send results to work server: 10001: Server responded: HTTP_BAD_REQUEST

22:48:50:WU01:FS00:Trying to send results to collection server

22:48:50:WU01:FS00:Uploading 632B to 171.67.108.26

22:48:50:WU01:FS00:Connecting to 171.67.108.26:8080

22:49:11:WARNING:WU01:FS00:WorkServer connection failed on port 8080 trying 80

22:49:11:WU01:FS00:Connecting to 171.67.108.26:80

22:50:26:WU01:FS00:Sending unit results: id:01 state:SEND error:DUMPED project:10501 run:326 clone:0 gen:1374 core:0x11 unit:0x00000b046652eda54b6ea93d00007f57

22:50:26:WU01:FS00:Uploading 632B to 171.67.108.21

22:50:26:WU01:FS00:Connecting to 171.67.108.21:8080

22:50:27:WARNING:WU01:FS00:Exception: Failed to send results to work server: 10001: Server responded: HTTP_BAD_REQUEST

22:50:27:WU01:FS00:Trying to send results to collection server

22:50:27:WU01:FS00:Uploading 632B to 171.67.108.26

22:50:27:WU01:FS00:Connecting to 171.67.108.26:8080

22:50:48:WARNING:WU01:FS00:WorkServer connection failed on port 8080 trying 80

22:50:48:WU01:FS00:Connecting to 171.67.108.26:80

22:53:03:WU01:FS00:Sending unit results: id:01 state:SEND error:DUMPED project:10501 run:326 clone:0 gen:1374 core:0x11 unit:0x00000b046652eda54b6ea93d00007f57

22:53:03:WU01:FS00:Uploading 632B to 171.67.108.21

22:53:03:WU01:FS00:Connecting to 171.67.108.21:8080

22:53:04:WARNING:WU01:FS00:Exception: Failed to send results to work server: 10001: Server responded: HTTP_BAD_REQUEST

22:53:04:WU01:FS00:Trying to send results to collection server

22:53:04:WU01:FS00:Uploading 632B to 171.67.108.26

22:53:04:WU01:FS00:Connecting to 171.67.108.26:8080

22:53:25:WARNING:WU01:FS00:WorkServer connection failed on port 8080 trying 80

22:53:25:WU01:FS00:Connecting to 171.67.108.26:80

22:57:18:WU01:FS00:Sending unit results: id:01 state:SEND error:DUMPED project:10501 run:326 clone:0 gen:1374 core:0x11 unit:0x00000b046652eda54b6ea93d00007f57

22:57:18:WU01:FS00:Uploading 632B to 171.67.108.21

22:57:18:WU01:FS00:Connecting to 171.67.108.21:8080

22:57:18:WARNING:WU01:FS00:Too many failed attempts to report WORK_DUMPED, dumping

22:57:18:WARNING:WU01:FS00:Exception: Failed to send results to work server: 10001: Server responded: HTTP_BAD_REQUEST

22:57:18:WU01:FS00:Trying to send results to collection server

22:57:18:WU01:FS00:Uploading 632B to 171.67.108.26

22:57:18:WU01:FS00:Connecting to 171.67.108.26:8080

22:57:40:WARNING:WU01:FS00:WorkServer connection failed on port 8080 trying 80

22:57:40:WU01:FS00:Connecting to 171.67.108.26:80

******************************* Date: 2013-04-13 *******************************

03:58:18:WU00:FS01:0xa4:Completed 15000 out of 1500000 steps (1%)

******************************* Date: 2013-04-13 *******************************

13:24:57:WU00:FS01:0xa4:Completed 30000 out of 1500000 steps (2%)

17:49:51:FS00:Shutting core down

17:49:51:FS01:Shutting core down

17:49:54:WU00:FS01:0xa4:Client no longer detected. Shutting down core

17:49:54:WU00:FS01:0xa4:

17:49:54:WU00:FS01:0xa4:Folding@home Core Shutdown: CLIENT_DIED

17:49:54:WU00:FS01:FahCore returned: INTERRUPTED (102 = 0x66)

17:50:52:Saving configuration to config.xml

17:50:52:<config>

17:50:52: <!-- Folding Slot Configuration -->

17:50:52: <power v='idle'/>

17:50:52:

17:50:52: <!-- Network -->

17:50:52: <proxy v=':8080'/>

17:50:52:

17:50:52: <!-- User Information -->

17:50:52: <passkey v='********************************'/>

17:50:52: <team v='37651'/>

17:50:52: <user v='iNzzane'/>

17:50:52:

17:50:52: <!-- Folding Slots -->

17:50:52: <slot id='0' type='GPU'/>

17:50:52: <slot id='1' type='CPU'/>

17:50:52:</config>

17:50:52:WARNING:FS00:Killing WU02

17:50:52:WU02:FS00:FahCore returned: INTERRUPTED (102 = 0x66)

17:54:42:WU00:FS01:Starting

17:54:43:WU00:FS01:Running FahCore: "C:\Program Files (x86)\FAHClient/FAHCoreWrapper.exe" C:/Users/Christian/AppData/Roaming/FAHClient/cores/www.stanford.edu/~pande/Win32/AMD64/Core_a4.fah/FahCore_a4.exe -dir 00 -suffix 01 -version 703 -lifeline 1744 -checkpoint 15 -np 4

17:54:43:WU00:FS01:Started FahCore on PID 7104

17:54:43:WU00:FS01:Core PID:5088

17:54:43:WU00:FS01:FahCore 0xa4 started

17:54:43:WU02:FS00:Starting

17:54:43:WU02:FS00:Running FahCore: "C:\Program Files (x86)\FAHClient/FAHCoreWrapper.exe" C:/Users/Christian/AppData/Roaming/FAHClient/cores/www.stanford.edu/~pande/Win32/AMD64/NVIDIA/G80/Core_11.fah/FahCore_11.exe -dir 02 -suffix 01 -version 703 -lifeline 1744 -checkpoint 15 -gpu 0 -gpu-vendor nvidia

17:54:43:WU02:FS00:Started FahCore on PID 4780

17:54:43:WU02:FS00:Core PID:5980

17:54:43:WU02:FS00:FahCore 0x11 started

17:54:43:WU00:FS01:0xa4:

17:54:43:WU00:FS01:0xa4:*------------------------------*

17:54:43:WU00:FS01:0xa4:Folding@Home Gromacs GB Core

17:54:43:WU00:FS01:0xa4:Version 2.27 (Dec. 15, 2010)

17:54:43:WU00:FS01:0xa4:

17:54:43:WU00:FS01:0xa4:Preparing to commence simulation

17:54:43:WU00:FS01:0xa4:- Looking at optimizations...

17:54:43:WU00:FS01:0xa4:- Files status OK

17:54:43:WARNING:WU02:FS00:FahCore returned: MISSING_WORK_FILES (116 = 0x74)

17:54:43:WARNING:WU02:FS00:Fatal error, dumping

17:54:43:WU02:FS00:Sending unit results: id:02 state:SEND error:DUMPED project:10501 run:306 clone:0 gen:1217 core:0x11 unit:0x00000ba66652eda54b6ea90800007794

17:54:43:WU02:FS00:Uploading 635B to 171.67.108.21

17:54:43:WU02:FS00:Connecting to 171.67.108.21:8080

17:54:43:WU00:FS01:0xa4:- Expanded 2053771 -> 5365960 (decompressed 261.2 percent)

17:54:43:WU00:FS01:0xa4:Called DecompressByteArray: compressed_data_size=2053771 data_size=5365960, decompressed_data_size=5365960 diff=0

17:54:43:WU00:FS01:0xa4:- Digital signature verified

17:54:43:WU00:FS01:0xa4:

17:54:43:WU00:FS01:0xa4:Project: 7808 (Run 7, Clone 323, Gen 27)

17:54:43:WU00:FS01:0xa4:

17:54:43:WU00:FS01:0xa4:Assembly optimizations on if available.

17:54:43:WU00:FS01:0xa4:Entering M.D.

17:54:43:WU01:FS00:Connecting to assign-GPU.stanford.edu:80

17:54:44:WARNING:WU02:FS00:Exception: Failed to send results to work server: 10001: Server responded: HTTP_BAD_REQUEST

17:54:44:WU02:FS00:Trying to send results to collection server

17:54:44:WU02:FS00:Uploading 635B to 171.67.108.26

17:54:44:WU02:FS00:Connecting to 171.67.108.26:8080

17:54:44:WU01:FS00:News: Welcome to Folding@Home

17:54:44:WU01:FS00:Assigned to work server 171.67.108.21

17:54:44:WU01:FS00:Requesting new work unit for slot 00: READY gpu:0:G92 [GeForce 9800 GTX] from 171.67.108.21

17:54:44:WU01:FS00:Connecting to 171.67.108.21:8080

17:54:45:WU01:FS00:Downloading 61.81KiB

17:54:46:WU01:FS00:Download complete

17:54:46:WU01:FS00:Received Unit: id:01 state:DOWNLOAD error:NO_ERROR project:10504 run:309 clone:0 gen:1598 core:0x11 unit:0x00000cd26652eda54b75b170000084fb

17:54:46:WU01:FS00:Starting

17:54:46:WU01:FS00:Running FahCore: "C:\Program Files (x86)\FAHClient/FAHCoreWrapper.exe" C:/Users/Christian/AppData/Roaming/FAHClient/cores/www.stanford.edu/~pande/Win32/AMD64/NVIDIA/G80/Core_11.fah/FahCore_11.exe -dir 01 -suffix 01 -version 703 -lifeline 1744 -checkpoint 15 -gpu 0 -gpu-vendor nvidia

17:54:46:WU01:FS00:Started FahCore on PID 2936

17:54:46:WU01:FS00:Core PID:6428

17:54:46:WU01:FS00:FahCore 0x11 started

17:54:46:WU01:FS00:0x11:

17:54:46:WU01:FS00:0x11:*------------------------------*

17:54:46:WU01:FS00:0x11:Folding@Home GPU Core

17:54:46:WU01:FS00:0x11:Version 1.31 (Tue Sep 15 10:57:42 PDT 2009)

17:54:46:WU01:FS00:0x11:

17:54:46:WU01:FS00:0x11:Compiler : Microsoft ® 32-bit C/C++ Optimizing Compiler Version 14.00.50727.762 for 80x86

17:54:46:WU01:FS00:0x11:Build host: amoeba

17:54:46:WU01:FS00:0x11:Board Type: Nvidia

17:54:46:WU01:FS00:0x11:Core :

17:54:46:WU01:FS00:0x11:Preparing to commence simulation

17:54:46:WU01:FS00:0x11:- Looking at optimizations...

17:54:46:WU01:FS00:0x11:DeleteFrameFiles: successfully deleted file=01/wudata_01.ckp

17:54:46:WU01:FS00:0x11:- Created dyn

17:54:46:WU01:FS00:0x11:- Files status OK

17:54:46:WU01:FS00:0x11:- Expanded 62784 -> 336799 (decompressed 536.4 percent)

17:54:46:WU01:FS00:0x11:Called DecompressByteArray: compressed_data_size=62784 data_size=336799, decompressed_data_size=336799 diff=0

17:54:46:WU01:FS00:0x11:- Digital signature verified

17:54:46:WU01:FS00:0x11:

17:54:46:WU01:FS00:0x11:Project: 10504 (Run 309, Clone 0, Gen 1598)

17:54:46:WU01:FS00:0x11:

17:54:46:WU01:FS00:0x11:Assembly optimizations on if available.

17:54:46:WU01:FS00:0x11:Entering M.D.

17:54:49:WU00:FS01:0xa4:Using Gromacs checkpoints

17:54:49:WU00:FS01:0xa4:Mapping NT from 4 to 4

17:54:50:WU00:FS01:0xa4:Resuming from checkpoint

17:54:50:WU00:FS01:0xa4:Verified 00/wudata_01.log

17:54:50:WU00:FS01:0xa4:Verified 00/wudata_01.trr

17:54:50:WU00:FS01:0xa4:Verified 00/wudata_01.xtc

17:54:50:WU00:FS01:0xa4:Verified 00/wudata_01.edr

17:54:54:WU01:FS00:0x11:Tpr hash 01/wudata_01.tpr: 2936652576 3936768692 4120315822 1744244779 2025686036

17:54:54:WU01:FS00:0x11:

17:54:54:WU01:FS00:0x11:Calling fah_main args: 14 usage=100

17:54:54:WU01:FS00:0x11:

17:55:01:WU01:FS00:0x11:Working on Protein

17:55:04:WU01:FS00:0x11:Client config unavailable.

17:55:04:WU01:FS00:0x11:Starting GUI Server

17:55:05:WARNING:WU02:FS00:WorkServer connection failed on port 8080 trying 80

17:55:05:WU02:FS00:Connecting to 171.67.108.26:80

17:55:06:FS00:Shutting core down

17:55:06:FS01:Shutting core down

17:55:06:WU01:FS00:0x11:Client no longer detected. Shutting down core

17:55:06:WU01:FS00:0x11:

17:55:06:WU01:FS00:0x11:Folding@home Core Shutdown: CLIENT_DIED

17:55:08:WU01:FS00:FahCore returned: INTERRUPTED (102 = 0x66)

17:55:13:WU00:FS01:0xa4:Client no longer detected. Shutting down core

17:55:13:WU00:FS01:0xa4:

17:55:13:WU00:FS01:0xa4:Folding@home Core Shutdown: CLIENT_DIED

17:55:14:WU00:FS01:FahCore returned: INTERRUPTED (102 = 0x66)

17:55:27:WARNING:WU02:FS00:Exception: Failed to send results to work server: 10001: Server responded: HTTP_BAD_REQUEST

17:55:27:WU02:FS00:Trying to send results to collection server

17:55:27:WU02:FS00:Uploading 635B to 171.67.108.26

17:55:27:WU02:FS00:Connecting to 171.67.108.26:8080

17:55:48:WARNING:WU02:FS00:WorkServer connection failed on port 8080 trying 80

17:55:48:WU02:FS00:Connecting to 171.67.108.26:80

17:56:07:Saving configuration to config.xml

17:56:07:<config>

17:56:07: <!-- Folding Slot Configuration -->

17:56:07: <power v='idle'/>

17:56:07:

17:56:07: <!-- Network -->

17:56:07: <proxy v=':8080'/>

17:56:07:

17:56:07: <!-- User Information -->

17:56:07: <passkey v='********************************'/>

17:56:07: <team v='37651'/>

17:56:07: <user v='iNzzane'/>

17:56:07:

17:56:07: <!-- Folding Slots -->

17:56:07: <slot id='0' type='GPU'/>

17:56:07: <slot id='1' type='CPU'/>

17:56:07:</config>

17:56:26:WU02:FS00:Sending unit results: id:02 state:SEND error:DUMPED project:10501 run:306 clone:0 gen:1217 core:0x11 unit:0x00000ba66652eda54b6ea90800007794

17:56:26:WU02:FS00:Uploading 635B to 171.67.108.21

17:56:26:WU02:FS00:Connecting to 171.67.108.21:8080

17:56:27:WARNING:WU02:FS00:Exception: Failed to send results to work server: 10001: Server responded: HTTP_BAD_REQUEST

17:56:27:WU02:FS00:Trying to send results to collection server

17:56:27:WU02:FS00:Uploading 635B to 171.67.108.26

17:56:27:WU02:FS00:Connecting to 171.67.108.26:8080

17:56:48:WARNING:WU02:FS00:WorkServer connection failed on port 8080 trying 80

17:56:48:WU02:FS00:Connecting to 171.67.108.26:80

17:58:03:WU02:FS00:Sending unit results: id:02 state:SEND error:DUMPED project:10501 run:306 clone:0 gen:1217 core:0x11 unit:0x00000ba66652eda54b6ea90800007794

17:58:03:WU02:FS00:Uploading 635B to 171.67.108.21

17:58:03:WU02:FS00:Connecting to 171.67.108.21:8080

17:58:04:WARNING:WU02:FS00:Exception: Failed to send results to work server: 10001: Server responded: HTTP_BAD_REQUEST

17:58:04:WU02:FS00:Trying to send results to collection server

17:58:04:WU02:FS00:Uploading 635B to 171.67.108.26

17:58:04:WU02:FS00:Connecting to 171.67.108.26:8080

17:58:25:WARNING:WU02:FS00:WorkServer connection failed on port 8080 trying 80

17:58:25:WU02:FS00:Connecting to 171.67.108.26:80

18:00:40:WU02:FS00:Sending unit results: id:02 state:SEND error:DUMPED project:10501 run:306 clone:0 gen:1217 core:0x11 unit:0x00000ba66652eda54b6ea90800007794

18:00:40:WU02:FS00:Uploading 635B to 171.67.108.21

18:00:40:WU02:FS00:Connecting to 171.67.108.21:8080

18:00:41:WARNING:WU02:FS00:Exception: Failed to send results to work server: 10001: Server responded: HTTP_BAD_REQUEST

18:00:41:WU02:FS00:Trying to send results to collection server

18:00:41:WU02:FS00:Uploading 635B to 171.67.108.26

18:00:41:WU02:FS00:Connecting to 171.67.108.26:8080

18:01:02:WARNING:WU02:FS00:WorkServer connection failed on port 8080 trying 80

18:01:02:WU02:FS00:Connecting to 171.67.108.26:80

18:04:54:WU02:FS00:Sending unit results: id:02 state:SEND error:DUMPED project:10501 run:306 clone:0 gen:1217 core:0x11 unit:0x00000ba66652eda54b6ea90800007794

18:04:54:WU02:FS00:Uploading 635B to 171.67.108.21

18:04:54:WU02:FS00:Connecting to 171.67.108.21:8080

18:04:55:WARNING:WU02:FS00:Too many failed attempts to report WORK_DUMPED, dumping

18:04:55:WARNING:WU02:FS00:Exception: Failed to send results to work server: 10001: Server responded: HTTP_BAD_REQUEST

18:04:55:WU02:FS00:Trying to send results to collection server

18:04:55:WU02:FS00:Uploading 635B to 171.67.108.26

18:04:55:WU02:FS00:Connecting to 171.67.108.26:8080

18:05:16:WARNING:WU02:FS00:WorkServer connection failed on port 8080 trying 80

18:05:16:WU02:FS00:Connecting to 171.67.108.26:80

18:05:38:WU02:FS00:Cleaning up

 

 

 

Angående den andre maskina så dropper jeg Esxi og går for en Ubuntu install direkte på HW, eneste er at prosessorene er ikke 64-biters så må få fiksa noe for 32-bits.

3,4,5,6 maskinene er på vei opp! Så nok å ta seg til en lørdagskveld :)

Lenke til kommentar

"Klør meg i hodet"

 

Kjører visst 2 klienter på Ubuntu...

 

Forhåpentligvis så funket "./fah6 -oneunit" og satt ./fah6 -config til å spørre om opp/nedlasting, just in case

Så får en prøve igjen når den ene erferdig (70% nå)

 

 

Må bare legge til at jeg nå kjører fahcore 17 og GPU jobber nå opp til 100% load (mot 47% før)

og PPD har blitt doblet (på denne W7 pc)

Endret av Zpeed
Lenke til kommentar

Her er logg..

 

 

22:21:31:Saving configuration to config.xml

22:21:31:<config>

22:21:31: <!-- Folding Slot Configuration -->

22:21:31: <power v='light'/>

22:21:31:

22:21:31: <!-- Network -->

22:21:31: <proxy v=':8080'/>

22:21:31:

22:21:31: <!-- User Information -->

22:21:31: <passkey v='********************************'/>

22:21:31: <team v='37651'/>

22:21:31: <user v='iNzzane'/>

22:21:31:

22:21:31: <!-- Folding Slots -->

22:21:31: <slot id='0' type='GPU'/>

22:21:31: <slot id='1' type='CPU'/>

22:21:31:</config>

22:47:05:FS01:Shutting core down

22:47:05:WU01:FS00:Starting

22:47:05:WU01:FS00:Running FahCore: "C:\Program Files (x86)\FAHClient/FAHCoreWrapper.exe" C:/Users/Christian/AppData/Roaming/FAHClient/cores/www.stanford.edu/~pande/Win32/AMD64/NVIDIA/G80/Core_11.fah/FahCore_11.exe -dir 01 -suffix 01 -version 703 -lifeline 1744 -checkpoint 15 -gpu 0 -gpu-vendor nvidia

22:47:05:WU01:FS00:Started FahCore on PID 3660

22:47:05:WU01:FS00:Core PID:324

22:47:05:WU01:FS00:FahCore 0x11 started

22:47:05:WU01:FS00:0x11:

22:47:05:WU01:FS00:0x11:*------------------------------*

22:47:05:WU01:FS00:0x11:Folding@Home GPU Core

22:47:05:WU01:FS00:0x11:Version 1.31 (Tue Sep 15 10:57:42 PDT 2009)

22:47:05:WU01:FS00:0x11:

22:47:05:WU01:FS00:0x11:Compiler : Microsoft ® 32-bit C/C++ Optimizing Compiler Version 14.00.50727.762 for 80x86

22:47:05:WU01:FS00:0x11:Build host: amoeba

22:47:05:WU01:FS00:0x11:Board Type: Nvidia

22:47:05:WU01:FS00:0x11:Core :

22:47:05:WU01:FS00:0x11:Preparing to commence simulation

22:47:05:WU01:FS00:0x11:- Looking at optimizations...

22:47:05:WU01:FS00:0x11:DeleteFrameFiles: successfully deleted file=01/wudata_01.ckp

22:47:05:WU01:FS00:0x11:- Created dyn

22:47:05:WU01:FS00:0x11:- Files status OK

22:47:05:WU01:FS00:0x11:Error: Missing work file=<>

22:47:05:WU01:FS00:0x11:

22:47:05:WU01:FS00:0x11:Folding@home Core Shutdown: MISSING_WORK_FILES

22:47:06:WARNING:WU01:FS00:FahCore returned: MISSING_WORK_FILES (116 = 0x74)

22:47:06:WARNING:WU01:FS00:Fatal error, dumping

22:47:06:WU01:FS00:Sending unit results: id:01 state:SEND error:DUMPED project:10501 run:326 clone:0 gen:1374 core:0x11 unit:0x00000b046652eda54b6ea93d00007f57

22:47:06:WU01:FS00:Uploading 632B to 171.67.108.21

22:47:06:WU01:FS00:Connecting to 171.67.108.21:8080

22:47:06:WU02:FS00:Connecting to assign-GPU.stanford.edu:80

22:47:06:WARNING:WU01:FS00:Exception: Failed to send results to work server: 10001: Server responded: HTTP_BAD_REQUEST

22:47:06:WU01:FS00:Trying to send results to collection server

22:47:06:WU01:FS00:Uploading 632B to 171.67.108.26

22:47:06:WU01:FS00:Connecting to 171.67.108.26:8080

22:47:07:WU02:FS00:News: Welcome to Folding@Home

22:47:07:WU02:FS00:Assigned to work server 171.67.108.21

22:47:07:WU02:FS00:Requesting new work unit for slot 00: READY gpu:0:G92 [GeForce 9800 GTX] from 171.67.108.21

22:47:07:WU02:FS00:Connecting to 171.67.108.21:8080

22:47:07:WU02:FS00:Downloading 61.98KiB

22:47:08:WU02:FS00:Download complete

22:47:08:WU02:FS00:Received Unit: id:02 state:DOWNLOAD error:NO_ERROR project:10501 run:306 clone:0 gen:1217 core:0x11 unit:0x00000ba66652eda54b6ea90800007794

22:47:08:WU02:FS00:Starting

22:47:08:WU02:FS00:Running FahCore: "C:\Program Files (x86)\FAHClient/FAHCoreWrapper.exe" C:/Users/Christian/AppData/Roaming/FAHClient/cores/www.stanford.edu/~pande/Win32/AMD64/NVIDIA/G80/Core_11.fah/FahCore_11.exe -dir 02 -suffix 01 -version 703 -lifeline 1744 -checkpoint 15 -gpu 0 -gpu-vendor nvidia

22:47:08:WU02:FS00:Started FahCore on PID 6404

22:47:08:WU02:FS00:Core PID:3940

22:47:08:WU02:FS00:FahCore 0x11 started

22:47:09:WU02:FS00:0x11:

22:47:09:WU02:FS00:0x11:*------------------------------*

22:47:09:WU02:FS00:0x11:Folding@Home GPU Core

22:47:09:WU02:FS00:0x11:Version 1.31 (Tue Sep 15 10:57:42 PDT 2009)

22:47:09:WU02:FS00:0x11:

22:47:09:WU02:FS00:0x11:Compiler : Microsoft ® 32-bit C/C++ Optimizing Compiler Version 14.00.50727.762 for 80x86

22:47:09:WU02:FS00:0x11:Build host: amoeba

22:47:09:WU02:FS00:0x11:Board Type: Nvidia

22:47:09:WU02:FS00:0x11:Core :

22:47:09:WU02:FS00:0x11:Preparing to commence simulation

22:47:09:WU02:FS00:0x11:- Looking at optimizations...

22:47:09:WU02:FS00:0x11:DeleteFrameFiles: successfully deleted file=02/wudata_01.ckp

22:47:09:WU02:FS00:0x11:- Created dyn

22:47:09:WU02:FS00:0x11:- Files status OK

22:47:09:WU02:FS00:0x11:- Expanded 62958 -> 336763 (decompressed 534.9 percent)

22:47:09:WU02:FS00:0x11:Called DecompressByteArray: compressed_data_size=62958 data_size=336763, decompressed_data_size=336763 diff=0

22:47:09:WU02:FS00:0x11:- Digital signature verified

22:47:09:WU02:FS00:0x11:

22:47:09:WU02:FS00:0x11:Project: 10501 (Run 306, Clone 0, Gen 1217)

22:47:09:WU02:FS00:0x11:

22:47:09:WU02:FS00:0x11:Assembly optimizations on if available.

22:47:09:WU02:FS00:0x11:Entering M.D.

22:47:14:WU00:FS01:FahCore returned: INTERRUPTED (102 = 0x66)

22:47:14:WU00:FS01:Starting

22:47:14:WARNING:WU00:FS01:Changed SMP threads from 2 to 4 this can cause some work units to fail

22:47:14:WU00:FS01:Running FahCore: "C:\Program Files (x86)\FAHClient/FAHCoreWrapper.exe" C:/Users/Christian/AppData/Roaming/FAHClient/cores/www.stanford.edu/~pande/Win32/AMD64/Core_a4.fah/FahCore_a4.exe -dir 00 -suffix 01 -version 703 -lifeline 1744 -checkpoint 15 -np 4

22:47:14:WU00:FS01:Started FahCore on PID 1396

22:47:14:WU00:FS01:Core PID:3844

22:47:14:WU00:FS01:FahCore 0xa4 started

22:47:15:WU02:FS00:0x11:Tpr hash 02/wudata_01.tpr: 2962507630 4276244391 2471906633 3618587897 4224266303

22:47:15:WU02:FS00:0x11:

22:47:15:WU02:FS00:0x11:Calling fah_main args: 14 usage=100

22:47:15:WU02:FS00:0x11:

22:47:15:WU00:FS01:0xa4:

22:47:15:WU00:FS01:0xa4:*------------------------------*

22:47:15:WU00:FS01:0xa4:Folding@Home Gromacs GB Core

22:47:15:WU00:FS01:0xa4:Version 2.27 (Dec. 15, 2010)

22:47:15:WU00:FS01:0xa4:

22:47:15:WU00:FS01:0xa4:Preparing to commence simulation

22:47:15:WU00:FS01:0xa4:- Looking at optimizations...

22:47:15:WU00:FS01:0xa4:- Files status OK

22:47:15:WU00:FS01:0xa4:- Expanded 2053771 -> 5365960 (decompressed 261.2 percent)

22:47:15:WU00:FS01:0xa4:Called DecompressByteArray: compressed_data_size=2053771 data_size=5365960, decompressed_data_size=5365960 diff=0

22:47:15:WU00:FS01:0xa4:- Digital signature verified

22:47:15:WU00:FS01:0xa4:

22:47:15:WU00:FS01:0xa4:Project: 7808 (Run 7, Clone 323, Gen 27)

22:47:15:WU00:FS01:0xa4:

22:47:15:WU00:FS01:0xa4:Assembly optimizations on if available.

22:47:15:WU00:FS01:0xa4:Entering M.D.

22:47:16:WU02:FS00:0x11:Working on Protein

22:47:16:WU02:FS00:0x11:Run: exception thrown during GuardedRun

22:47:16:WU02:FS00:0x11:Run: exception thrown in GuardedRun -- Gromacs cannot continue further.

22:47:16:WU02:FS00:0x11:Going to send back what have done -- stepsTotalG=0

22:47:16:WU02:FS00:0x11:Work fraction=0.0000 steps=0.

22:47:20:WU02:FS00:0x11:logfile size=0 infoLength=0 edr=0 trr=23

22:47:20:WU02:FS00:0x11:+ Opened results file

22:47:20:WU02:FS00:0x11:- Writing 633 bytes of core data to disk...

22:47:20:WU02:FS00:0x11:Done: 121 -> 123 (compressed to 101.6 percent)

22:47:20:WU02:FS00:0x11: ... Done.

22:47:20:WU02:FS00:0x11:DeleteFrameFiles: successfully deleted file=02/wudata_01.ckp

22:47:20:WU02:FS00:0x11:

22:47:20:WU02:FS00:0x11:Folding@home Core Shutdown: UNSTABLE_MACHINE

22:47:21:WU00:FS01:0xa4:Using Gromacs checkpoints

22:47:21:WU00:FS01:0xa4:Mapping NT from 4 to 4

22:47:27:WARNING:WU01:FS00:WorkServer connection failed on port 8080 trying 80

22:47:27:WU01:FS00:Connecting to 171.67.108.26:80

22:47:50:WARNING:WU01:FS00:Exception: Failed to send results to work server: 10001: Server responded: HTTP_BAD_REQUEST

22:47:50:WU01:FS00:Trying to send results to collection server

22:47:50:WU01:FS00:Uploading 632B to 171.67.108.26

22:47:50:WU01:FS00:Connecting to 171.67.108.26:8080

22:48:06:Saving configuration to config.xml

22:48:06:<config>

22:48:06: <!-- Folding Slot Configuration -->

22:48:06: <power v='full'/>

22:48:06:

22:48:06: <!-- Network -->

22:48:06: <proxy v=':8080'/>

22:48:06:

22:48:06: <!-- User Information -->

22:48:06: <passkey v='********************************'/>

22:48:06: <team v='37651'/>

22:48:06: <user v='iNzzane'/>

22:48:06:

22:48:06: <!-- Folding Slots -->

22:48:06: <slot id='0' type='GPU'/>

22:48:06: <slot id='1' type='CPU'/>

22:48:06:</config>

22:48:11:WARNING:WU01:FS00:WorkServer connection failed on port 8080 trying 80

22:48:11:WU01:FS00:Connecting to 171.67.108.26:80

22:48:17:WU00:FS01:0xa4:Resuming from checkpoint

22:48:17:WU00:FS01:0xa4:Verified 00/wudata_01.log

22:48:17:WU00:FS01:0xa4:Verified 00/wudata_01.trr

22:48:17:WU00:FS01:0xa4:Verified 00/wudata_01.xtc

22:48:17:WU00:FS01:0xa4:Verified 00/wudata_01.edr

22:48:18:WU00:FS01:0xa4:Completed 7810 out of 1500000 steps (0%)

22:48:19:WARNING:WU00:FS01:Detected clock skew (1 mins 04 secs), adjusting time estimates

22:48:49:WU01:FS00:Sending unit results: id:01 state:SEND error:DUMPED project:10501 run:326 clone:0 gen:1374 core:0x11 unit:0x00000b046652eda54b6ea93d00007f57

22:48:49:WU01:FS00:Uploading 632B to 171.67.108.21

22:48:49:WU01:FS00:Connecting to 171.67.108.21:8080

22:48:50:WARNING:WU01:FS00:Exception: Failed to send results to work server: 10001: Server responded: HTTP_BAD_REQUEST

22:48:50:WU01:FS00:Trying to send results to collection server

22:48:50:WU01:FS00:Uploading 632B to 171.67.108.26

22:48:50:WU01:FS00:Connecting to 171.67.108.26:8080

22:49:11:WARNING:WU01:FS00:WorkServer connection failed on port 8080 trying 80

22:49:11:WU01:FS00:Connecting to 171.67.108.26:80

22:50:26:WU01:FS00:Sending unit results: id:01 state:SEND error:DUMPED project:10501 run:326 clone:0 gen:1374 core:0x11 unit:0x00000b046652eda54b6ea93d00007f57

22:50:26:WU01:FS00:Uploading 632B to 171.67.108.21

22:50:26:WU01:FS00:Connecting to 171.67.108.21:8080

22:50:27:WARNING:WU01:FS00:Exception: Failed to send results to work server: 10001: Server responded: HTTP_BAD_REQUEST

22:50:27:WU01:FS00:Trying to send results to collection server

22:50:27:WU01:FS00:Uploading 632B to 171.67.108.26

22:50:27:WU01:FS00:Connecting to 171.67.108.26:8080

22:50:48:WARNING:WU01:FS00:WorkServer connection failed on port 8080 trying 80

22:50:48:WU01:FS00:Connecting to 171.67.108.26:80

22:53:03:WU01:FS00:Sending unit results: id:01 state:SEND error:DUMPED project:10501 run:326 clone:0 gen:1374 core:0x11 unit:0x00000b046652eda54b6ea93d00007f57

22:53:03:WU01:FS00:Uploading 632B to 171.67.108.21

22:53:03:WU01:FS00:Connecting to 171.67.108.21:8080

22:53:04:WARNING:WU01:FS00:Exception: Failed to send results to work server: 10001: Server responded: HTTP_BAD_REQUEST

22:53:04:WU01:FS00:Trying to send results to collection server

22:53:04:WU01:FS00:Uploading 632B to 171.67.108.26

22:53:04:WU01:FS00:Connecting to 171.67.108.26:8080

22:53:25:WARNING:WU01:FS00:WorkServer connection failed on port 8080 trying 80

22:53:25:WU01:FS00:Connecting to 171.67.108.26:80

22:57:18:WU01:FS00:Sending unit results: id:01 state:SEND error:DUMPED project:10501 run:326 clone:0 gen:1374 core:0x11 unit:0x00000b046652eda54b6ea93d00007f57

22:57:18:WU01:FS00:Uploading 632B to 171.67.108.21

22:57:18:WU01:FS00:Connecting to 171.67.108.21:8080

22:57:18:WARNING:WU01:FS00:Too many failed attempts to report WORK_DUMPED, dumping

22:57:18:WARNING:WU01:FS00:Exception: Failed to send results to work server: 10001: Server responded: HTTP_BAD_REQUEST

22:57:18:WU01:FS00:Trying to send results to collection server

22:57:18:WU01:FS00:Uploading 632B to 171.67.108.26

22:57:18:WU01:FS00:Connecting to 171.67.108.26:8080

22:57:40:WARNING:WU01:FS00:WorkServer connection failed on port 8080 trying 80

22:57:40:WU01:FS00:Connecting to 171.67.108.26:80

******************************* Date: 2013-04-13 *******************************

03:58:18:WU00:FS01:0xa4:Completed 15000 out of 1500000 steps (1%)

******************************* Date: 2013-04-13 *******************************

13:24:57:WU00:FS01:0xa4:Completed 30000 out of 1500000 steps (2%)

17:49:51:FS00:Shutting core down

17:49:51:FS01:Shutting core down

17:49:54:WU00:FS01:0xa4:Client no longer detected. Shutting down core

17:49:54:WU00:FS01:0xa4:

17:49:54:WU00:FS01:0xa4:Folding@home Core Shutdown: CLIENT_DIED

17:49:54:WU00:FS01:FahCore returned: INTERRUPTED (102 = 0x66)

17:50:52:Saving configuration to config.xml

17:50:52:<config>

17:50:52: <!-- Folding Slot Configuration -->

17:50:52: <power v='idle'/>

17:50:52:

17:50:52: <!-- Network -->

17:50:52: <proxy v=':8080'/>

17:50:52:

17:50:52: <!-- User Information -->

17:50:52: <passkey v='********************************'/>

17:50:52: <team v='37651'/>

17:50:52: <user v='iNzzane'/>

17:50:52:

17:50:52: <!-- Folding Slots -->

17:50:52: <slot id='0' type='GPU'/>

17:50:52: <slot id='1' type='CPU'/>

17:50:52:</config>

17:50:52:WARNING:FS00:Killing WU02

17:50:52:WU02:FS00:FahCore returned: INTERRUPTED (102 = 0x66)

17:54:42:WU00:FS01:Starting

17:54:43:WU00:FS01:Running FahCore: "C:\Program Files (x86)\FAHClient/FAHCoreWrapper.exe" C:/Users/Christian/AppData/Roaming/FAHClient/cores/www.stanford.edu/~pande/Win32/AMD64/Core_a4.fah/FahCore_a4.exe -dir 00 -suffix 01 -version 703 -lifeline 1744 -checkpoint 15 -np 4

17:54:43:WU00:FS01:Started FahCore on PID 7104

17:54:43:WU00:FS01:Core PID:5088

17:54:43:WU00:FS01:FahCore 0xa4 started

17:54:43:WU02:FS00:Starting

17:54:43:WU02:FS00:Running FahCore: "C:\Program Files (x86)\FAHClient/FAHCoreWrapper.exe" C:/Users/Christian/AppData/Roaming/FAHClient/cores/www.stanford.edu/~pande/Win32/AMD64/NVIDIA/G80/Core_11.fah/FahCore_11.exe -dir 02 -suffix 01 -version 703 -lifeline 1744 -checkpoint 15 -gpu 0 -gpu-vendor nvidia

17:54:43:WU02:FS00:Started FahCore on PID 4780

17:54:43:WU02:FS00:Core PID:5980

17:54:43:WU02:FS00:FahCore 0x11 started

17:54:43:WU00:FS01:0xa4:

17:54:43:WU00:FS01:0xa4:*------------------------------*

17:54:43:WU00:FS01:0xa4:Folding@Home Gromacs GB Core

17:54:43:WU00:FS01:0xa4:Version 2.27 (Dec. 15, 2010)

17:54:43:WU00:FS01:0xa4:

17:54:43:WU00:FS01:0xa4:Preparing to commence simulation

17:54:43:WU00:FS01:0xa4:- Looking at optimizations...

17:54:43:WU00:FS01:0xa4:- Files status OK

17:54:43:WARNING:WU02:FS00:FahCore returned: MISSING_WORK_FILES (116 = 0x74)

17:54:43:WARNING:WU02:FS00:Fatal error, dumping

17:54:43:WU02:FS00:Sending unit results: id:02 state:SEND error:DUMPED project:10501 run:306 clone:0 gen:1217 core:0x11 unit:0x00000ba66652eda54b6ea90800007794

17:54:43:WU02:FS00:Uploading 635B to 171.67.108.21

17:54:43:WU02:FS00:Connecting to 171.67.108.21:8080

17:54:43:WU00:FS01:0xa4:- Expanded 2053771 -> 5365960 (decompressed 261.2 percent)

17:54:43:WU00:FS01:0xa4:Called DecompressByteArray: compressed_data_size=2053771 data_size=5365960, decompressed_data_size=5365960 diff=0

17:54:43:WU00:FS01:0xa4:- Digital signature verified

17:54:43:WU00:FS01:0xa4:

17:54:43:WU00:FS01:0xa4:Project: 7808 (Run 7, Clone 323, Gen 27)

17:54:43:WU00:FS01:0xa4:

17:54:43:WU00:FS01:0xa4:Assembly optimizations on if available.

17:54:43:WU00:FS01:0xa4:Entering M.D.

17:54:43:WU01:FS00:Connecting to assign-GPU.stanford.edu:80

17:54:44:WARNING:WU02:FS00:Exception: Failed to send results to work server: 10001: Server responded: HTTP_BAD_REQUEST

17:54:44:WU02:FS00:Trying to send results to collection server

17:54:44:WU02:FS00:Uploading 635B to 171.67.108.26

17:54:44:WU02:FS00:Connecting to 171.67.108.26:8080

17:54:44:WU01:FS00:News: Welcome to Folding@Home

17:54:44:WU01:FS00:Assigned to work server 171.67.108.21

17:54:44:WU01:FS00:Requesting new work unit for slot 00: READY gpu:0:G92 [GeForce 9800 GTX] from 171.67.108.21

17:54:44:WU01:FS00:Connecting to 171.67.108.21:8080

17:54:45:WU01:FS00:Downloading 61.81KiB

17:54:46:WU01:FS00:Download complete

17:54:46:WU01:FS00:Received Unit: id:01 state:DOWNLOAD error:NO_ERROR project:10504 run:309 clone:0 gen:1598 core:0x11 unit:0x00000cd26652eda54b75b170000084fb

17:54:46:WU01:FS00:Starting

17:54:46:WU01:FS00:Running FahCore: "C:\Program Files (x86)\FAHClient/FAHCoreWrapper.exe" C:/Users/Christian/AppData/Roaming/FAHClient/cores/www.stanford.edu/~pande/Win32/AMD64/NVIDIA/G80/Core_11.fah/FahCore_11.exe -dir 01 -suffix 01 -version 703 -lifeline 1744 -checkpoint 15 -gpu 0 -gpu-vendor nvidia

17:54:46:WU01:FS00:Started FahCore on PID 2936

17:54:46:WU01:FS00:Core PID:6428

17:54:46:WU01:FS00:FahCore 0x11 started

17:54:46:WU01:FS00:0x11:

17:54:46:WU01:FS00:0x11:*------------------------------*

17:54:46:WU01:FS00:0x11:Folding@Home GPU Core

17:54:46:WU01:FS00:0x11:Version 1.31 (Tue Sep 15 10:57:42 PDT 2009)

17:54:46:WU01:FS00:0x11:

17:54:46:WU01:FS00:0x11:Compiler : Microsoft ® 32-bit C/C++ Optimizing Compiler Version 14.00.50727.762 for 80x86

17:54:46:WU01:FS00:0x11:Build host: amoeba

17:54:46:WU01:FS00:0x11:Board Type: Nvidia

17:54:46:WU01:FS00:0x11:Core :

17:54:46:WU01:FS00:0x11:Preparing to commence simulation

17:54:46:WU01:FS00:0x11:- Looking at optimizations...

17:54:46:WU01:FS00:0x11:DeleteFrameFiles: successfully deleted file=01/wudata_01.ckp

17:54:46:WU01:FS00:0x11:- Created dyn

17:54:46:WU01:FS00:0x11:- Files status OK

17:54:46:WU01:FS00:0x11:- Expanded 62784 -> 336799 (decompressed 536.4 percent)

17:54:46:WU01:FS00:0x11:Called DecompressByteArray: compressed_data_size=62784 data_size=336799, decompressed_data_size=336799 diff=0

17:54:46:WU01:FS00:0x11:- Digital signature verified

17:54:46:WU01:FS00:0x11:

17:54:46:WU01:FS00:0x11:Project: 10504 (Run 309, Clone 0, Gen 1598)

17:54:46:WU01:FS00:0x11:

17:54:46:WU01:FS00:0x11:Assembly optimizations on if available.

17:54:46:WU01:FS00:0x11:Entering M.D.

17:54:49:WU00:FS01:0xa4:Using Gromacs checkpoints

17:54:49:WU00:FS01:0xa4:Mapping NT from 4 to 4

17:54:50:WU00:FS01:0xa4:Resuming from checkpoint

17:54:50:WU00:FS01:0xa4:Verified 00/wudata_01.log

17:54:50:WU00:FS01:0xa4:Verified 00/wudata_01.trr

17:54:50:WU00:FS01:0xa4:Verified 00/wudata_01.xtc

17:54:50:WU00:FS01:0xa4:Verified 00/wudata_01.edr

17:54:54:WU01:FS00:0x11:Tpr hash 01/wudata_01.tpr: 2936652576 3936768692 4120315822 1744244779 2025686036

17:54:54:WU01:FS00:0x11:

17:54:54:WU01:FS00:0x11:Calling fah_main args: 14 usage=100

17:54:54:WU01:FS00:0x11:

17:55:01:WU01:FS00:0x11:Working on Protein

17:55:04:WU01:FS00:0x11:Client config unavailable.

17:55:04:WU01:FS00:0x11:Starting GUI Server

17:55:05:WARNING:WU02:FS00:WorkServer connection failed on port 8080 trying 80

17:55:05:WU02:FS00:Connecting to 171.67.108.26:80

17:55:06:FS00:Shutting core down

17:55:06:FS01:Shutting core down

17:55:06:WU01:FS00:0x11:Client no longer detected. Shutting down core

17:55:06:WU01:FS00:0x11:

17:55:06:WU01:FS00:0x11:Folding@home Core Shutdown: CLIENT_DIED

17:55:08:WU01:FS00:FahCore returned: INTERRUPTED (102 = 0x66)

17:55:13:WU00:FS01:0xa4:Client no longer detected. Shutting down core

17:55:13:WU00:FS01:0xa4:

17:55:13:WU00:FS01:0xa4:Folding@home Core Shutdown: CLIENT_DIED

17:55:14:WU00:FS01:FahCore returned: INTERRUPTED (102 = 0x66)

17:55:27:WARNING:WU02:FS00:Exception: Failed to send results to work server: 10001: Server responded: HTTP_BAD_REQUEST

17:55:27:WU02:FS00:Trying to send results to collection server

17:55:27:WU02:FS00:Uploading 635B to 171.67.108.26

17:55:27:WU02:FS00:Connecting to 171.67.108.26:8080

17:55:48:WARNING:WU02:FS00:WorkServer connection failed on port 8080 trying 80

17:55:48:WU02:FS00:Connecting to 171.67.108.26:80

17:56:07:Saving configuration to config.xml

17:56:07:<config>

17:56:07: <!-- Folding Slot Configuration -->

17:56:07: <power v='idle'/>

17:56:07:

17:56:07: <!-- Network -->

17:56:07: <proxy v=':8080'/>

17:56:07:

17:56:07: <!-- User Information -->

17:56:07: <passkey v='********************************'/>

17:56:07: <team v='37651'/>

17:56:07: <user v='iNzzane'/>

17:56:07:

17:56:07: <!-- Folding Slots -->

17:56:07: <slot id='0' type='GPU'/>

17:56:07: <slot id='1' type='CPU'/>

17:56:07:</config>

17:56:26:WU02:FS00:Sending unit results: id:02 state:SEND error:DUMPED project:10501 run:306 clone:0 gen:1217 core:0x11 unit:0x00000ba66652eda54b6ea90800007794

17:56:26:WU02:FS00:Uploading 635B to 171.67.108.21

17:56:26:WU02:FS00:Connecting to 171.67.108.21:8080

17:56:27:WARNING:WU02:FS00:Exception: Failed to send results to work server: 10001: Server responded: HTTP_BAD_REQUEST

17:56:27:WU02:FS00:Trying to send results to collection server

17:56:27:WU02:FS00:Uploading 635B to 171.67.108.26

17:56:27:WU02:FS00:Connecting to 171.67.108.26:8080

17:56:48:WARNING:WU02:FS00:WorkServer connection failed on port 8080 trying 80

17:56:48:WU02:FS00:Connecting to 171.67.108.26:80

17:58:03:WU02:FS00:Sending unit results: id:02 state:SEND error:DUMPED project:10501 run:306 clone:0 gen:1217 core:0x11 unit:0x00000ba66652eda54b6ea90800007794

17:58:03:WU02:FS00:Uploading 635B to 171.67.108.21

17:58:03:WU02:FS00:Connecting to 171.67.108.21:8080

17:58:04:WARNING:WU02:FS00:Exception: Failed to send results to work server: 10001: Server responded: HTTP_BAD_REQUEST

17:58:04:WU02:FS00:Trying to send results to collection server

17:58:04:WU02:FS00:Uploading 635B to 171.67.108.26

17:58:04:WU02:FS00:Connecting to 171.67.108.26:8080

17:58:25:WARNING:WU02:FS00:WorkServer connection failed on port 8080 trying 80

17:58:25:WU02:FS00:Connecting to 171.67.108.26:80

18:00:40:WU02:FS00:Sending unit results: id:02 state:SEND error:DUMPED project:10501 run:306 clone:0 gen:1217 core:0x11 unit:0x00000ba66652eda54b6ea90800007794

18:00:40:WU02:FS00:Uploading 635B to 171.67.108.21

18:00:40:WU02:FS00:Connecting to 171.67.108.21:8080

18:00:41:WARNING:WU02:FS00:Exception: Failed to send results to work server: 10001: Server responded: HTTP_BAD_REQUEST

18:00:41:WU02:FS00:Trying to send results to collection server

18:00:41:WU02:FS00:Uploading 635B to 171.67.108.26

18:00:41:WU02:FS00:Connecting to 171.67.108.26:8080

18:01:02:WARNING:WU02:FS00:WorkServer connection failed on port 8080 trying 80

18:01:02:WU02:FS00:Connecting to 171.67.108.26:80

18:04:54:WU02:FS00:Sending unit results: id:02 state:SEND error:DUMPED project:10501 run:306 clone:0 gen:1217 core:0x11 unit:0x00000ba66652eda54b6ea90800007794

18:04:54:WU02:FS00:Uploading 635B to 171.67.108.21

18:04:54:WU02:FS00:Connecting to 171.67.108.21:8080

18:04:55:WARNING:WU02:FS00:Too many failed attempts to report WORK_DUMPED, dumping

18:04:55:WARNING:WU02:FS00:Exception: Failed to send results to work server: 10001: Server responded: HTTP_BAD_REQUEST

18:04:55:WU02:FS00:Trying to send results to collection server

18:04:55:WU02:FS00:Uploading 635B to 171.67.108.26

18:04:55:WU02:FS00:Connecting to 171.67.108.26:8080

18:05:16:WARNING:WU02:FS00:WorkServer connection failed on port 8080 trying 80

18:05:16:WU02:FS00:Connecting to 171.67.108.26:80

18:05:38:WU02:FS00:Cleaning up

 

 

 

Angående den andre maskina så dropper jeg Esxi og går for en Ubuntu install direkte på HW, eneste er at prosessorene er ikke 64-biters så må få fiksa noe for 32-bits.

3,4,5,6 maskinene er på vei opp! Så nok å ta seg til en lørdagskveld :)

 

FahCore returned: INTERRUPTED (102 = 0x66) er gjentakende i loggen, kan bety i følgende: http://fahwiki.net/i...oreStatus_codes

Shutdown requested by user. Exiting.***** Got a SIGTERM signal (15)

Killing all core threads

Folding@Home Client Shutdown.

Kan også bety Bad Unit eller at dette kommer fra GPU, se GPU feilkoder her: http://fahwiki.net/i...GPU_Error_Codes som sier:

 

Two suggested causes for mdrun_gpu error 50 are unstable GPU hardware or loss of directX context.

 

Denne finnes også:

 

22:47:20:WU02:FS00:0x11:Folding@home Core Shutdown: UNSTABLE_MACHINE

 

Som kan bety mye rart, men minnefeil, ustabili OC, etc.kan være en årsak.

 

Jeg ville slettet workmappa og forsøkt en restart av klienten. For meg så ser det ut som at loggen viser fra både CPU og GPU?

Endret av -alias-
Lenke til kommentar

 

Her var det mye "gøyt"!

 

Det virker som GPUen din sliter veldig mye, er den overklokket? Kan hende den er ustabil pga for høy overklokk.

 

Ellers så virker jo CPUen din til å fungere greit, men de to prosentene som faktisk har skjedd ga deg en TPF på 9 timer, det er bare spinnvilt! Riktignok er P7808 et stort prosjekt, men TPF burde ligge på 20-30 minutt for en low-end firekjerner. Du kan selvfølgelig vært så heldig at du har fått en dårlig WU (det hender). Eller så er ikke power slideren satt til "full" og noe annet på maskinen spiser ressurser (fra loggen din ser jeg 17:56:07: <power v='idle'/> står rett før de to prosentene med fremdrift på CPU kommer).

 

Jeg tror jeg sier meg enig med -alias-, slett workmappa og ta en fulstendig restart av klienten (trykk på "exit" og så ta deg en tur ned på oppgavelinjen, høyreklikk på Folding-ikonet og trykk "quit"). Kan også være lurt å kun folde på CPU først og få den til å fungere så blir det mindre problemer å forholde seg til :) Du kan legge inn option="pause-on-start" og value="true" (legges inn uten "") ved å trykke på "Configure->Slots->Velg CPU/GPU->Edit->Add", da må du selv starte slotene ved oppstart ved å høyreklikke og velge "fold".

post-57713-0-90639800-1365933197.jpg

 

 

Det er forresten riktig -alias- at loggen deles av alle slotene. I V7 kan du sortere på slot under logg slik at f.eks bare CPU vises.

Endret av Arve1234567890
Lenke til kommentar
Men er PPD-en på mange av prosjektene rett og slett dårlige på en "aldrende" 2700K? Ligger på 4.4GHz nå. (Skrev 2600K tidligere, det var feil.) Med en klokk på 4,4&Hz burde jeg da få mer enn 25k PPD? En temp på 66 grader er vel ikke ille det da? Tenker stort sett at alt overklokket under 70 grader på full load er greit nok.

 

Prosjekt 7645-7647 gir lite PPD generelt. Rundt 25k PPD høres riktig ut for din CPU på disse prosjektene. Regn med opp mot 30-40% mer PPD på andre prosjekter.

 

Temp på 66 grader er bra.

Lenke til kommentar

Men det ser ikke ut til at scoren min oppdateres. Tallene på folding.extremeoverclocking er helt gale, og på fah-web er ikke den sist opplastedet WU-en registrert. Er det mulig å få en oversikt over WU-ene den har registrert at jeg har levert? Er det noe spesielt som står i loggen som bekrefter at stanford har mottatt WU-en? Har følgende på siste fullførte:

09:52:07:WU00:FS00:Connecting to assign3.stanford.edu:8080
09:52:08:WU00:FS00:News: Welcome to Folding@Home
09:52:08:WU00:FS00:Assigned to work server 155.247.166.219
09:52:08:WU00:FS00:Requesting new work unit for slot 00: RUNNING cpu:8 from 155.247.166.219
09:52:08:WU00:FS00:Connecting to 155.247.166.219:8080
09:52:09:WU00:FS00:Downloading 80.45KiB
09:52:09:WU00:FS00:Download complete
09:52:09:WU00:FS00:Received Unit: id:00 state:DOWNLOAD error:NO_ERROR project:6347 run:3 clone:1 gen:84 core:0xa4 unit:0x000000590002894b512e76900027e586
09:59:47:WU01:FS00:0xa4:Completed 24749999 out of 25000000 steps  (99%)
10:07:32:WU01:FS00:0xa4:Completed 24999999 out of 25000000 steps  (100%)
10:07:32:WU01:FS00:0xa4:DynamicWrapper: Finished Work Unit: sleep=10000
10:07:42:WU01:FS00:0xa4:
10:07:42:WU01:FS00:0xa4:Finished Work Unit:
10:07:42:WU01:FS00:0xa4:- Reading up to 17054052 from "01/wudata_01.trr": Read 17054052
10:07:42:WU01:FS00:0xa4:trr file hash check passed.
10:07:42:WU01:FS00:0xa4:- Reading up to 1684584 from "01/wudata_01.xtc": Read 1684584
10:07:42:WU01:FS00:0xa4:xtc file hash check passed.
10:07:42:WU01:FS00:0xa4:edr file hash check passed.
10:07:42:WU01:FS00:0xa4:logfile size: 102567
10:07:42:WU01:FS00:0xa4:Leaving Run
10:07:42:WU01:FS00:0xa4:- Writing 18923015 bytes of core data to disk...
10:07:44:WU01:FS00:0xa4:Done: 18922503 -> 17543327 (compressed to 92.7 percent)
10:07:44:WU01:FS00:0xa4:  ... Done.
10:10:13:WU01:FS00:0xa4:- Shutting down core
10:10:13:WU01:FS00:0xa4:
10:10:13:WU01:FS00:0xa4:Folding@home Core Shutdown: FINISHED_UNIT
10:10:14:WU01:FS00:FahCore returned: FINISHED_UNIT (100 = 0x64)
10:10:14:WU01:FS00:Sending unit results: id:01 state:SEND error:NO_ERROR project:7042 run:0 clone:729 gen:0 core:0xa4 unit:0x000000010001329c5145007f22de627d
10:10:14:WU01:FS00:Uploading 16.73MiB to 129.74.85.15
10:10:14:WU01:FS00:Connecting to 129.74.85.15:8080
10:10:14:WU00:FS00:Starting
10:10:14:WU00:FS00:Running FahCore: /usr/bin/FAHCoreWrapper /var/lib/fahclient/cores/www.stanford.edu/~pande/Linux/AMD64/Core_a4.fah/FahCore_a4 -dir 00 -suffix 01 -version 703 -lifeline 1207 -checkpoint 15 -np 8
10:10:14:WU00:FS00:Started FahCore on PID 11271
10:10:14:Started thread 13 on PID 1207
10:10:14:WU00:FS00:Core PID:11275
10:10:14:WU00:FS00:FahCore 0xa4 started
10:10:15:WU00:FS00:0xa4:
10:10:15:WU00:FS00:0xa4:*------------------------------*
10:10:15:WU00:FS00:0xa4:Folding@Home Gromacs GB Core
10:10:15:WU00:FS00:0xa4:Version 2.27 (Dec. 15, 2010)
10:10:15:WU00:FS00:0xa4:
10:10:15:WU00:FS00:0xa4:Preparing to commence simulation
10:10:15:WU00:FS00:0xa4:- Looking at optimizations...
10:10:15:WU00:FS00:0xa4:- Created dyn
10:10:15:WU00:FS00:0xa4:- Files status OK
10:10:15:WU00:FS00:0xa4:- Expanded 81868 -> 173488 (decompressed 211.9 percent)
10:10:15:WU00:FS00:0xa4:Called DecompressByteArray: compressed_data_size=81868 data_size=173488, decompressed_data_size=173488 diff=0
10:10:15:WU00:FS00:0xa4:- Digital signature verified
10:10:15:WU00:FS00:0xa4:
10:10:15:WU00:FS00:0xa4:Project: 6347 (Run 3, Clone 1, Gen 84)
10:10:15:WU00:FS00:0xa4:
10:10:15:WU00:FS00:0xa4:Assembly optimizations on if available.
10:10:15:WU00:FS00:0xa4:Entering M.D.
10:10:20:WU01:FS00:Upload 27.27%
10:10:20:WU00:FS00:0xa4:Completed 0 out of 5000000 steps  (0%)
10:10:26:WU01:FS00:Upload 79.57%
10:10:33:WU01:FS00:Upload complete
10:10:33:WU01:FS00:Server responded WORK_ACK (400)
10:10:33:WU01:FS00:Final credit estimate, 16676.00 points
10:10:33:WU01:FS00:Cleaning up

Det ser jo OK ut i mine øyne. (bortsett fra at vredit estimaten er øavere enn fah-control-applikasjonen sin, men, men.

Lenke til kommentar

Jeg har fått

 

10:10:33:WU01:FS00:Server responded WORK_ACK (400)

10:10:33:WU01:FS00:Final credit estimate, 16676.00 points

 

disse linjene til å stemme noenlunde overrens med hva jeg får av poeng. Husk at A4-prosjekt får 10% ekstra poeng på server-siden. Men, på brukeren din ser det ut som passkey ikke er riktig/mangler? Det ser ut som det er base credit poeng som er registrert: http://folding.extre...php?s=&u=200503

 

Har du fått deg ny passkey, eller bruker du din gamle? Kanskje sjekke at den er skrevet inn riktig? Dvs skriv den inn på nytt :p Du kan gå i XML-filen og lese den hvis du vil, men siden den er stygg og lang er det kanskje enklere å kopiere inn på nytt.

 

Edit: Den 10% på A4 ser ikke uttil å stemme helt for min del likevel. Sist leverte WU sier

 

08:17:05:WU00:FS00:Server responded WORK_ACK (400)

08:17:05:WU00:FS00:Final credit estimate, 1195.00 points

 

og EOC sier

 

04.14, 6am 1,195 1

 

mens jeg har en WU som sier

 

01:24:27:WU00:FS00:Server responded WORK_ACK (400)

01:24:27:WU00:FS00:Final credit estimate, 5594.00 points

 

mens hvis jeg tar 5594*1,1=6153,4 finner jeg den igjen som

 

04.14, 12am 6,154 1

 

Begge disse er A4.....

Endret av Arve1234567890
Lenke til kommentar

Hvor mye lagringsplass er nødvendig på stasjonen hvor programmet ligger. Sender den filer mens den analyserer, eller lagres en (flere) større filer før sending ?

 

Fikk bluescreen i natt ved folding, tror det er min ssd som ikke spiller på lag (Vertex 3 :hm: )

 

Får ikke starta foldinga igjen, alt henger seg, får error mld ved oppstart både i client og adv.view. Re-installerer programmet.

Endret av Crawler123
Lenke til kommentar

Jeg har en "gaqmmel" passkey, men det er ikke SÅ lenge siden den ble brukt sist, mener jeg. Har dobbeltsjekket at jeg har lagt den inn riktig i FAHControl. er det noen configfil der jeg kan dobbeltsjekke at den er blitt registrert riktig? Villve være rart om FAHcontrol-programmet skulle klare å bomme på DET da, men man vet jo aldri med Stanford...

 

Må si jeg blir bra forbannet om Stanford har klart å slette passkeyen på sin side uten å sende en mail om det.

 

red: Rebestilte passkeyen, og den matchet den. Kan være de har nullstilt WU-telleren slik at jeg må levere 10 nye da? Da skulle jeg gjerne levert 10 mindre WU-er som tar kortere tid, men går vel ikke an å mikse og trikse med det. Nå ligger jeg f.eks. på 31K PPD med prosjekt 8090, og det er surt å ikke få bonus. :p

Endret av NgZ
Lenke til kommentar
Den 10% på A4 ser ikke uttil å stemme helt for min del likevel.

Mener å huske at jeg leste at 10% ekstra (eller hvor mange % det nå var) på A4 var noe PandeLab brukte som insentiv for å få folk til å bytte til V7-klienten, siden A4 vel kun ble tildelt med V7-klienten? Tror begrunnelsen var at V7 er en fordel for forskningens del, flere muligheter/mer fleksibel eller noe slikt. Kanskje de nå er fornøyd med antall V7-klienter og har fjernet A4-bonusen igjen?

Endret av HawP
Lenke til kommentar

Har du klokket mye? hvis jeg ikke husker feil (det kan godt være) betyr det at kjernen har regnet feil. Nøyaktigheten kan ramms ved overklokking.

Har meget lett overklokk på cpu, med en profil som for meg kjent er "stabil". Hadde som nevnt tidligere en crash i natt. Men det tror jeg skyldes at min HDD SSD som tidligere har(stadig vekk) "freezed". Kan det skyldes dette? Jeg kan ta ned cpu til sock og se om jeg får kjøre.

Lenke til kommentar

Opprett en konto eller logg inn for å kommentere

Du må være et medlem for å kunne skrive en kommentar

Opprett konto

Det er enkelt å melde seg inn for å starte en ny konto!

Start en konto

Logg inn

Har du allerede en konto? Logg inn her.

Logg inn nå
  • Hvem er aktive   0 medlemmer

    • Ingen innloggede medlemmer aktive
×
×
  • Opprett ny...