Lyden funker ikke. Hva skal jeg gjøre?

[kaasa92]

funket ikke :/

[Sokkalf™]

Da vet jeg dessverre ikke.

[flyndrefjes]

Da vet jeg dessverre ikke.

9552853[/snapback]

Det er litt synd. Men hurra for deg, Sokkalf. Nei, jeg skal ikke rippe opp i navnet ditt selv om du ligner en smule på Fridjof Arngren. :-) Men jeg sier fortsatt hurra. Hvorfor? Jo, fordi de fleste Linux-brukere er så enormt behjelpelig når det kommer til stykket! Og spesielt Sokkalf har jeg sett over lang tid. En ildskjel. Det skal du ha ! Og i Windows-forum-ene kan du hjelpe og hjelpe, uten å bli tatt seriøst..faktisk! Hrrrm... Nei, jeg har sett på din støtte her på forumet, og i andre forum, og du burde snart sprette champagne-flasken. For deg selv, om ikke annet!

 

Se dere rundt omkring, dere som er her på programvare/GNU/Linux... ja, se dere rundt omkring... og se hva som skrives. Det er ingen tvil om at her, i dette forumet, kommer det bestandig god hjelp frem. Og hvorfor kan jeg si det...? Tja, la oss bare ta en titt:

 

Når det gjelder svar i forhold til programvare i Windows, ligger svar/spørsmål i forholdet 5:1. Kanskje bra, ettersom Windows fungerer så bra, så er det sikkert veldig lite å spørre om. Hehe, dette er selvfølgelig en spøk.

 

Når det gjelder Linux/GNU ligger svar/spørsmål i forholdet 9:1. Kanskje ikke så bra, ettersom Linux-distribusjoner er så frykelig tungrodde, avanserte, virus-infiserte, trege, osv.... tuller selvfølgelig også her. Skjønner ikke det, at jeg er i et sånt tullehumør, da gitt!

 

P.S. Ser fremover til å hjelpe dere gutter og jenter! Først skal jeg drikke opp min kopp, lese litt generelt om data, gå i dybden av alle operativsystemer...ja, Linux-kjernen også...

Så håper jeg å komme tilbake med hjelp etterhvert. Tryin'

[Kagee]

Hmm....

 

Prøv "sudo modprobe snd-sb16"

og så " dmesg | tail -25" (og post teksten her)

 

Eventuelt før/etter - gå inn i BIOS og SETT lydkortet IRQ til 5.

 

Hvorfor er jeg og flyndrefjes våkne på denne tiden av døgnet?

 

Edit: Avataren min? Har jeg en avatar? Kanskje jeg skal oppgradere bildet, men beholde layouten....

Endret 24. september 2007 av Kagee

[flyndrefjes]

Hvorfor er jeg og flyndrefjes våkne på denne tiden av døgnet?

9553559[/snapback]

Hehe, tja, si det?

Sånn er vel vi data-nerder, eller vi som sitter opp og venter på at «kjerringa» skal komme hjem eller videre?

 

Jeg må si, for å bare ta det helt visuelt, at din avatar er helt unik, Kagee. Din form for behjelpelighet, både når det gjelder åpen kildekode og Windows, og ikke minst din kunnskap når det gjelder programering av HTML, JAVA, JS, osv, så er du et funn for mange brukere her!! Hepp! Keep up the good work!

P.S. Natten er lang... og stille... derfor??

[Sokkalf™]

Det var da voldsomt da, flyndrefjes.

Men takk skal du ha, det varmer.

[kaasa92]

Får fortsatt ikke lyden til å funke. Er eneste måten å kjøpe nytt lydkort? Burde være noen måte å få det til å funke?

[Del]

Du har vel ennå ikke funnet ut hvilket lydkort det er, så det bør være en start. Google kan være en god fortsettelse. Nytt lydkort koster fra under hundrelappen, så det er heller ikke umulig løsning. Prøv følgende:

sudo aptitude install hwinfo

hwinfo --sound

[Kagee]

Repost:

Prøv "sudo modprobe snd-sb16"

og så " dmesg | tail -25" (og post teksten her)

 

Eventuelt før/etter - gå inn i BIOS og SETT lydkortet/ISA-ettelleranet IRQ til 5.

[bjokys]

Det her øres mistenkelig ut som en kjerne uten kompiert ISA-støtte. Noen som vet om de nyere Ubuntu-kjernene leveres med ISA-støtte? I verste fall må vi kompilere en ny kjerne med ISA-støtte.

 

Noen som har tid til å undersøke dette mens jeg stikker på jobb? Skal se på det senere idag viss ingen andre har funnet ut noe

 

Edit: nevermind, leste grundigere gjennom lspci-utskriften, og der står det jo att ISA-broen er funnet.

 

Edit2: til trådstarter, kan du poste utskrifen av:

 

dmesg | grep ISA

 

eventuelt også bare

 

dmesg

 

Denne er gansk lang, så den gjør du lurt i å skjule i en spoiler-tag.

Endret 26. september 2007 av bepe86

[kaasa92]

Repost:

Prøv "sudo modprobe snd-sb16"

og så " dmesg | tail -25" (og post teksten her)

 

Eventuelt før/etter - gå inn i BIOS og SETT lydkortet/ISA-ettelleranet IRQ til 5.

9576524[/snapback]

Klikk for å se/fjerne innholdet nedenfor

magnus@magnus-desktop:~$ sudo modprobe snd-sb16

FATAL: Error inserting snd_sb16 (/lib/modules/2.6.20-16-generic/kernel/sound/isa/sb/snd-sb16.ko): No such device

magnus@magnus-desktop:~$ dmesg | tail -25

[ 36.392000] agpgart: Putting AGP V2 device at 0000:01:00.0 into 4x mode

[ 37.100000] ppdev: user-space parallel port driver

[ 38.176000] apm: BIOS version 1.2 Flags 0x07 (Driver version 1.16ac)

[ 38.176000] apm: overridden by ACPI.

[ 39.608000] Bluetooth: Core ver 2.11

[ 39.608000] NET: Registered protocol family 31

[ 39.608000] Bluetooth: HCI device and connection manager initialized

[ 39.608000] Bluetooth: HCI socket layer initialized

[ 40.112000] Bluetooth: L2CAP ver 2.8

[ 40.112000] Bluetooth: L2CAP socket layer initialized

[ 40.224000] Bluetooth: RFCOMM socket layer initialized

[ 40.224000] Bluetooth: RFCOMM TTY layer initialized

[ 40.224000] Bluetooth: RFCOMM ver 1.8

[ 42.004000] NET: Registered protocol family 10

[ 42.004000] lo: Disabled Privacy Extensions

[ 42.864000] RT25usb Driver version 1.0.0

[ 49.548000] eth0: setting half-duplex.

[ 49.548000] ADDRCONF(NETDEV_UP): eth0: link is not ready

[ 49.564000] RT25usb Driver version 1.0.0

[ 61.128000] rausb0: no IPv6 routers present

[ 132.480000] RT25usb Driver version 1.0.0

[ 137.796000] RT25usb Driver version 1.0.0

[ 149.820000] rausb0: no IPv6 routers present

[ 498.996000] Sound Blaster 16 soundcard not found or device busy

[ 498.996000] In case, if you have AWE card, try snd-sbawe module

magnus@magnus-desktop:~$

 

Under er dmesg | grep ISA og dmesg

 

Klikk for å se/fjerne innholdet nedenfor

dmesg | grep ISA

[ 24.441186] EISA bus registered

[ 25.984493] EISA: Probing bus 0 at eisa.0

[ 25.984571] Cannot allocate resource for EISA slot 4

[ 25.984619] Cannot allocate resource for EISA slot 5

[ 25.984666] Cannot allocate resource for EISA slot 6

[ 25.984723] EISA: Detected 0 cards.

magnus@magnus-desktop:~$ dmesg

[ 0.000000] Linux version 2.6.20-16-generic (root@terranova) (gcc version 4.1.2 (Ubuntu 4.1.2-0ubuntu4)) #2 SMP Fri Aug 31 00:55:27 UTC 2007 (Ubuntu 2.6.20-16.31-generic)

[ 0.000000] BIOS-provided physical RAM map:

[ 0.000000] sanitize start

[ 0.000000] sanitize end

[ 0.000000] copy_e820_map() start: 0000000000000000 size: 000000000009fc00 end: 000000000009fc00 type: 1

[ 0.000000] copy_e820_map() type is E820_RAM

[ 0.000000] copy_e820_map() start: 000000000009fc00 size: 0000000000000400 end: 00000000000a0000 type: 2

[ 0.000000] copy_e820_map() start: 00000000000f0000 size: 0000000000010000 end: 0000000000100000 type: 2

[ 0.000000] copy_e820_map() start: 0000000000100000 size: 000000001fef0000 end: 000000001fff0000 type: 1

[ 0.000000] copy_e820_map() type is E820_RAM

[ 0.000000] copy_e820_map() start: 000000001fff0000 size: 0000000000003000 end: 000000001fff3000 type: 4

[ 0.000000] copy_e820_map() start: 000000001fff3000 size: 000000000000d000 end: 0000000020000000 type: 3

[ 0.000000] copy_e820_map() start: 00000000ffff0000 size: 0000000000010000 end: 0000000100000000 type: 2

[ 0.000000] BIOS-e820: 0000000000000000 - 000000000009fc00 (usable)

[ 0.000000] BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved)

[ 0.000000] BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved)

[ 0.000000] BIOS-e820: 0000000000100000 - 000000001fff0000 (usable)

[ 0.000000] BIOS-e820: 000000001fff0000 - 000000001fff3000 (ACPI NVS)

[ 0.000000] BIOS-e820: 000000001fff3000 - 0000000020000000 (ACPI data)

[ 0.000000] BIOS-e820: 00000000ffff0000 - 0000000100000000 (reserved)

[ 0.000000] 0MB HIGHMEM available.

[ 0.000000] 511MB LOWMEM available.

[ 0.000000] Entering add_active_range(0, 0, 131056) 0 entries of 256 used

[ 0.000000] Zone PFN ranges:

[ 0.000000] DMA 0 -> 4096

[ 0.000000] Normal 4096 -> 131056

[ 0.000000] HighMem 131056 -> 131056

[ 0.000000] early_node_map[1] active PFN ranges

[ 0.000000] 0: 0 -> 131056

[ 0.000000] On node 0 totalpages: 131056

[ 0.000000] DMA zone: 32 pages used for memmap

[ 0.000000] DMA zone: 0 pages reserved

[ 0.000000] DMA zone: 4064 pages, LIFO batch:0

[ 0.000000] Normal zone: 991 pages used for memmap

[ 0.000000] Normal zone: 125969 pages, LIFO batch:31

[ 0.000000] HighMem zone: 0 pages used for memmap

[ 0.000000] DMI 2.3 present.

[ 0.000000] ACPI: RSDP (v000 VT8371 ) @ 0x000f7900

[ 0.000000] ACPI: RSDT (v001 VT8371 AWRDACPI 0x42302e31 AWRD 0x00000000) @ 0x1fff3000

[ 0.000000] ACPI: FADT (v001 VT8371 AWRDACPI 0x42302e31 AWRD 0x00000000) @ 0x1fff3040

[ 0.000000] ACPI: DSDT (v001 VT8371 AWRDACPI 0x00001000 MSFT 0x0100000c) @ 0x00000000

[ 0.000000] ACPI: PM-Timer IO Port: 0x4008

[ 0.000000] Allocating PCI resources starting at 30000000 (gap: 20000000:dfff0000)

[ 0.000000] Detected 1200.092 MHz processor.

[ 23.652352] Built 1 zonelists. Total pages: 130033

[ 23.652359] Kernel command line: root=UUID=e781d7ad-6b64-4301-b2e1-5d40c533a9ee ro splash

[ 23.652637] Local APIC disabled by BIOS -- you can enable it with "lapic"

[ 23.652655] mapped APIC to ffffd000 (0140a000)

[ 23.652662] Enabling fast FPU save and restore... done.

[ 23.652683] Initializing CPU#0

[ 23.652806] PID hash table entries: 2048 (order: 11, 8192 bytes)

[ 23.654047] Console: colour VGA+ 80x25

[ 23.656498] Dentry cache hash table entries: 65536 (order: 6, 262144 bytes)

[ 23.657130] Inode-cache hash table entries: 32768 (order: 5, 131072 bytes)

[ 23.686272] Memory: 508600k/524224k available (1993k kernel code, 14988k reserved, 900k data, 328k init, 0k highmem)

[ 23.686354] virtual kernel memory layout:

[ 23.686356] fixmap : 0xfff4e000 - 0xfffff000 ( 708 kB)

[ 23.686359] pkmap : 0xff800000 - 0xffc00000 (4096 kB)

[ 23.686361] vmalloc : 0xe0800000 - 0xff7fe000 ( 495 MB)

[ 23.686363] lowmem : 0xc0000000 - 0xdfff0000 ( 511 MB)

[ 23.686366] .init : 0xc03d9000 - 0xc042b000 ( 328 kB)

[ 23.686368] .data : 0xc02f2434 - 0xc03d36d4 ( 900 kB)

[ 23.686370] .text : 0xc0100000 - 0xc02f2434 (1993 kB)

[ 23.686732] Checking if this processor honours the WP bit even in supervisor mode... Ok.

[ 23.764779] Calibrating delay using timer specific routine.. 2402.60 BogoMIPS (lpj=4805204)

[ 23.764941] Security Framework v1.0.0 initialized

[ 23.764997] SELinux: Disabled at boot.

[ 23.765068] Mount-cache hash table entries: 512

[ 23.765360] CPU: After generic identify, caps: 0183f9ff c1c7f9ff 00000000 00000000 00000000 00000000 00000000

[ 23.765375] CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)

[ 23.765428] CPU: L2 Cache: 256K (64 bytes/line)

[ 23.765475] CPU: After all inits, caps: 0183f9ff c1c7f9ff 00000000 00000420 00000000 00000000 00000000

[ 23.765493] Compat vDSO mapped to ffffe000.

[ 23.765546] Remapping vsyscall page to ffffe000

[ 23.765604] Checking 'hlt' instruction... OK.

[ 23.780868] SMP alternatives: switching to UP code

[ 23.781326] Freeing SMP alternatives: 11k freed

[ 23.781779] Early unpacking initramfs... done

[ 24.307741] ACPI: Core revision 20060707

[ 24.313907] ACPI: Looking for DSDT in initramfs... file /DSDT.aml not found, using machine DSDT.

[ 24.315688] ACPI: setting ELCR to 0800 (from 0e20)

[ 24.439858] CPU0: AMD Athlon processor stepping 02

[ 24.439970] SMP motherboard not detected.

[ 24.440017] Local APIC not detected. Using dummy APIC emulation.

[ 24.440147] Brought up 1 CPUs

[ 24.440682] Booting paravirtualized kernel on bare hardware

[ 24.440846] Time: 12:34:12 Date: 08/26/107

[ 24.440953] NET: Registered protocol family 16

[ 24.441186] EISA bus registered

[ 24.441237] ACPI: bus type pci registered

[ 24.472509] PCI: PCI BIOS revision 2.10 entry at 0xfb4e0, last bus=1

[ 24.472559] PCI: Using configuration type 1

[ 24.472612] Setting up standard PCI resources

[ 24.487541] ACPI: Interpreter enabled

[ 24.487596] ACPI: Using PIC for interrupt routing

[ 24.488516] ACPI: PCI Root Bridge [PCI0] (0000:00)

[ 24.488586] PCI: Probing PCI hardware (bus 00)

[ 24.488706] ACPI: Assume root bridge [\_SB_.PCI0] bus is 0

[ 24.489007] Disabling VIA memory write queue (PCI ID 0305, rev 03): [55] 89 & 1f -> 09

[ 24.489299] PCI quirk: region 6000-607f claimed by vt82c686 HW-mon

[ 24.489350] PCI quirk: region 5000-500f claimed by vt82c686 SMB

[ 24.489592] Boot video device is 0000:01:00.0

[ 24.489637] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]

[ 24.506106] ACPI: PCI Interrupt Link [LNKA] (IRQs 1 3 4 5 6 7 *10 11 12 14 15)

[ 24.506991] ACPI: PCI Interrupt Link [LNKB] (IRQs 1 3 4 *5 6 7 10 11 12 14 15)

[ 24.507884] ACPI: PCI Interrupt Link [LNKC] (IRQs 1 3 4 5 6 7 10 *11 12 14 15)

[ 24.508780] ACPI: PCI Interrupt Link [LNKD] (IRQs 1 3 4 5 6 7 10 11 12 14 15) *9

[ 24.512450] Linux Plug and Play Support v0.97 © Adam Belay

[ 24.512519] pnp: PnP ACPI init

[ 24.516661] pnp: PnP ACPI: found 13 devices

[ 24.516717] PnPBIOS: Disabled by ACPI PNP

[ 24.516861] PCI: Using ACPI for IRQ routing

[ 24.516911] PCI: If a device doesn't work, try "pci=routeirq". If it helps, post a report

[ 24.537118] NET: Registered protocol family 8

[ 24.537166] NET: Registered protocol family 20

[ 24.538182] PCI: Bridge: 0000:00:01.0

[ 24.538229] IO window: disabled.

[ 24.538278] MEM window: e4000000-e5ffffff

[ 24.538325] PREFETCH window: d0000000-dfffffff

[ 24.538389] PCI: Setting latency timer of device 0000:00:01.0 to 64

[ 24.538438] NET: Registered protocol family 2

[ 24.576716] IP route cache hash table entries: 4096 (order: 2, 16384 bytes)

[ 24.576934] TCP established hash table entries: 16384 (order: 5, 131072 bytes)

[ 24.577474] TCP bind hash table entries: 8192 (order: 4, 65536 bytes)

[ 24.577773] TCP: Hash tables configured (established 16384 bind 8192)

[ 24.577824] TCP reno registered

[ 24.588768] checking if image is initramfs... it is

[ 25.580474] Freeing initrd memory: 6788k freed

[ 25.581353] audit: initializing netlink socket (disabled)

[ 25.581428] audit(1190810052.992:1): initialized

[ 25.581666] VFS: Disk quotas dquot_6.5.1

[ 25.581748] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)

[ 25.581887] io scheduler noop registered

[ 25.581964] io scheduler anticipatory registered

[ 25.582039] io scheduler deadline registered

[ 25.582123] io scheduler cfq registered (default)

[ 25.582245] Applying VIA southbridge workaround.

[ 25.582294] PCI: Disabling Via external APIC routing

[ 25.582693] isapnp: Scanning for PnP cards...

[ 25.936847] isapnp: No Plug & Play device found

[ 25.978854] Real Time Clock Driver v1.12ac

[ 25.978996] Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing enabled

[ 25.979256] serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A

[ 25.979562] serial8250: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A

[ 25.980564] 00:08: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A

[ 25.981062] 00:09: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A

[ 25.981495] mice: PS/2 mouse device common for all mice

[ 25.982514] RAMDISK driver initialized: 16 RAM disks of 65536K size 1024 blocksize

[ 25.983054] input: Macintosh mouse button emulation as /class/input/input0

[ 25.983161] Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2

[ 25.983216] ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx

[ 25.983593] PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12

[ 25.984103] serio: i8042 KBD port at 0x60,0x64 irq 1

[ 25.984244] serio: i8042 AUX port at 0x60,0x64 irq 12

[ 25.984493] EISA: Probing bus 0 at eisa.0

[ 25.984571] Cannot allocate resource for EISA slot 4

[ 25.984619] Cannot allocate resource for EISA slot 5

[ 25.984666] Cannot allocate resource for EISA slot 6

[ 25.984723] EISA: Detected 0 cards.

[ 26.015124] TCP cubic registered

[ 26.015180] NET: Registered protocol family 1

[ 26.015267] Using IPI No-Shortcut mode

[ 26.015470] ACPI: (supports S0 S1 S4 S5)

[ 26.015731] Magic number: 7:274:583

[ 26.015915] hash matches device ptyc1

[ 26.016109] Time: tsc clocksource has been installed.

[ 26.016942] Freeing unused kernel memory: 328k freed

[ 26.032026] input: AT Translated Set 2 keyboard as /class/input/input1

[ 27.394958] Capability LSM initialized

[ 27.518664] ACPI: CPU0 (power states: C1[C1] C2[C2])

[ 27.518677] ACPI: Processor [CPU0] (supports 2 throttling states)

[ 28.450896] SCSI subsystem initialized

[ 28.459557] libata version 2.20 loaded.

[ 28.465352] VP_IDE: IDE controller at PCI slot 0000:00:07.1

[ 28.465388] VP_IDE: chipset revision 6

[ 28.465392] VP_IDE: not 100% native mode: will probe irqs later

[ 28.465407] VP_IDE: VIA vt82c686b (rev 40) IDE UDMA100 controller on pci0000:00:07.1

[ 28.465420] ide0: BM-DMA at 0xe000-0xe007, BIOS settings: hda:DMA, hdb:DMA

[ 28.465441] ide1: BM-DMA at 0xe008-0xe00f, BIOS settings: hdc:DMA, hdd:pio

[ 28.465453] Probing IDE interface ide0...

[ 28.495836] usbcore: registered new interface driver usbfs

[ 28.495886] usbcore: registered new interface driver hub

[ 28.495930] usbcore: registered new device driver usb

[ 28.497605] USB Universal Host Controller Interface driver v3.0

[ 28.682152] ieee1394: Initialized config rom entry `ip1394'

[ 28.730250] Floppy drive(s): fd0 is 1.44M

[ 28.802892] FDC 0 is a post-1991 82077

[ 5.144000] hda: Maxtor 6E040L0, ATA DISK drive

[ 5.148000] Time: acpi_pm clocksource has been installed.

[ 5.592000] hdb: DVDRW IDE 16X, ATAPI CD/DVD-ROM drive

[ 5.648000] ide0 at 0x1f0-0x1f7,0x3f6 on irq 14

[ 5.648000] Probing IDE interface ide1...

[ 6.512000] hdc: PLEXTOR CD-R PX-W2410A, ATAPI CD/DVD-ROM drive

[ 6.848000] ide1 at 0x170-0x177,0x376 on irq 15

[ 6.848000] ACPI: PCI Interrupt Link [LNKD] enabled at IRQ 10

[ 6.848000] PCI: setting IRQ 10 as level-triggered

[ 6.848000] ACPI: PCI Interrupt 0000:00:07.2[D] -> Link [LNKD] -> GSI 10 (level, low) -> IRQ 10

[ 6.848000] PCI: VIA VLink IRQ fixup for 0000:00:07.2, from 9 to 10

[ 6.848000] uhci_hcd 0000:00:07.2: UHCI Host Controller

[ 6.848000] uhci_hcd 0000:00:07.2: new USB bus registered, assigned bus number 1

[ 6.848000] uhci_hcd 0000:00:07.2: irq 10, io base 0x0000e400

[ 6.852000] usb usb1: configuration #1 chosen from 1 choice

[ 6.852000] hub 1-0:1.0: USB hub found

[ 6.852000] hub 1-0:1.0: 2 ports detected

[ 6.864000] hda: max request size: 128KiB

[ 6.956000] ACPI: PCI Interrupt 0000:00:07.3[D] -> Link [LNKD] -> GSI 10 (level, low) -> IRQ 10

[ 6.956000] PCI: VIA VLink IRQ fixup for 0000:00:07.3, from 9 to 10

[ 6.956000] uhci_hcd 0000:00:07.3: UHCI Host Controller

[ 6.956000] uhci_hcd 0000:00:07.3: new USB bus registered, assigned bus number 2

[ 6.956000] uhci_hcd 0000:00:07.3: irq 10, io base 0x0000e800

[ 6.956000] usb usb2: configuration #1 chosen from 1 choice

[ 6.956000] hub 2-0:1.0: USB hub found

[ 6.956000] hub 2-0:1.0: 2 ports detected

[ 7.060000] ACPI: PCI Interrupt Link [LNKC] enabled at IRQ 11

[ 7.060000] PCI: setting IRQ 11 as level-triggered

[ 7.060000] ACPI: PCI Interrupt 0000:00:09.0[A] -> Link [LNKC] -> GSI 11 (level, low) -> IRQ 11

[ 7.060000] 3c59x: Donald Becker and others. www.scyld.com/network/vortex.html

[ 7.060000] 0000:00:09.0: 3Com PCI 3c905B Cyclone 100baseTx at e0862000.

[ 7.084000] ACPI: PCI Interrupt Link [LNKB] enabled at IRQ 5

[ 7.084000] PCI: setting IRQ 5 as level-triggered

[ 7.084000] ACPI: PCI Interrupt 0000:00:0f.0[A] -> Link [LNKB] -> GSI 5 (level, low) -> IRQ 5

[ 7.136000] ohci1394: fw-host0: OHCI-1394 1.0 (PCI): IRQ=[5] MMIO=[e7004000-e70047ff] Max Packet=[2048] IR/IT contexts=[4/8]

[ 7.472000] usb 2-1: new full speed USB device using uhci_hcd and address 2

[ 7.560000] hda: 80293248 sectors (41110 MB) w/2048KiB Cache, CHS=65535/16/63, UDMA(33)

[ 7.560000] hda: cache flushes supported

[ 7.560000] hda: hda1 hda2 < hda5 >

[ 7.608000] hdb: ATAPI 48X DVD-ROM DVD-R CD-R/RW drive, 2048kB Cache, UDMA(33)

[ 7.608000] Uniform CD-ROM driver Revision: 3.20

[ 7.612000] hdc: ATAPI 40X CD-ROM CD-R/RW drive, 4096kB Cache, UDMA(33)

[ 7.816000] usb 2-1: configuration #1 chosen from 1 choice

[ 7.896000] Attempting manual resume

[ 7.896000] swsusp: Resume From Partition 3:5

[ 7.896000] PM: Checking swsusp image.

[ 7.896000] PM: Resume from disk failed.

[ 7.928000] EXT3-fs: INFO: recovery required on readonly filesystem.

[ 7.928000] EXT3-fs: write access will be enabled during recovery.

[ 8.412000] ieee1394: Host added: ID:BUS[0-00:1023] GUID[003095261001cb11]

[ 9.184000] kjournald starting. Commit interval 5 seconds

[ 9.184000] EXT3-fs: recovery complete.

[ 9.188000] EXT3-fs: mounted filesystem with ordered data mode.

[ 22.816000] parport_pc: VIA 686A/8231 detected

[ 22.816000] parport_pc: probing current configuration

[ 22.816000] parport_pc: Current parallel port base: 0x378

[ 22.816000] parport0: PC-style at 0x378, irq 7 [PCSPP,EPP]

[ 22.916000] parport_pc: VIA parallel port: io=0x378, irq=7

[ 23.544000] Linux agpgart interface v0.102 © Dave Jones

[ 23.860000] pci_hotplug: PCI Hot Plug PCI Core version: 0.5

[ 23.864000] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4

[ 23.872000] agpgart: Detected VIA Twister-K/KT133x/KM133 chipset

[ 23.876000] agpgart: AGP aperture is 64M @ 0xe0000000

[ 23.988000] logips2pp: Detected unknown logitech mouse model 57

[ 24.124000] input: PC Speaker as /class/input/input2

[ 24.264000] nvidia: module license 'NVIDIA' taints kernel.

[ 24.580000] ACPI: PCI Interrupt Link [LNKA] enabled at IRQ 10

[ 24.580000] ACPI: PCI Interrupt 0000:01:00.0[A] -> Link [LNKA] -> GSI 10 (level, low) -> IRQ 10

[ 24.580000] NVRM: loading NVIDIA Linux x86 Kernel Module 1.0-9631 Thu Nov 9 17:38:10 PST 2006

[ 24.596000] input: ImExPS/2 Logitech Explorer Mouse as /class/input/input3

[ 24.804000] idVendor = 0x13b1, idProduct = 0xd

[ 24.804000] usbcore: registered new interface driver rt2570

[ 25.332000] fuse init (API version 7.8)

[ 25.372000] lp0: using parport0 (interrupt-driven).

[ 25.492000] Adding 1510068k swap on /dev/disk/by-uuid/bc11a7f7-a42e-427c-ab1a-402577067043. Priority:-1 extents:1 across:1510068k

[ 25.760000] EXT3 FS on hda1, internal journal

[ 27.588000] NET: Registered protocol family 17

[ 32.204000] input: Power Button (FF) as /class/input/input4

[ 32.212000] ACPI: Power Button (FF) [PWRF]

[ 32.268000] input: Power Button (CM) as /class/input/input5

[ 32.276000] ACPI: Power Button (CM) [PWRB]

[ 32.328000] input: Sleep Button (CM) as /class/input/input6

[ 32.336000] ACPI: Sleep Button (CM) [sLPB]

[ 32.528000] ibm_acpi: ec object not found

[ 32.612000] No dock devices found.

[ 32.640000] Using specific hotkey driver

[ 32.832000] pcc_acpi: loading...

[ 33.160000] powernow: No powernow capabilities detected

[ 36.392000] agpgart: Found an AGP 2.0 compliant device at 0000:00:00.0.

[ 36.392000] agpgart: Putting AGP V2 device at 0000:00:00.0 into 4x mode

[ 36.392000] agpgart: Putting AGP V2 device at 0000:01:00.0 into 4x mode

[ 37.100000] ppdev: user-space parallel port driver

[ 38.176000] apm: BIOS version 1.2 Flags 0x07 (Driver version 1.16ac)

[ 38.176000] apm: overridden by ACPI.

[ 39.608000] Bluetooth: Core ver 2.11

[ 39.608000] NET: Registered protocol family 31

[ 39.608000] Bluetooth: HCI device and connection manager initialized

[ 39.608000] Bluetooth: HCI socket layer initialized

[ 40.112000] Bluetooth: L2CAP ver 2.8

[ 40.112000] Bluetooth: L2CAP socket layer initialized

[ 40.224000] Bluetooth: RFCOMM socket layer initialized

[ 40.224000] Bluetooth: RFCOMM TTY layer initialized

[ 40.224000] Bluetooth: RFCOMM ver 1.8

[ 42.004000] NET: Registered protocol family 10

[ 42.004000] lo: Disabled Privacy Extensions

[ 42.864000] RT25usb Driver version 1.0.0

[ 49.548000] eth0: setting half-duplex.

[ 49.548000] ADDRCONF(NETDEV_UP): eth0: link is not ready

[ 49.564000] RT25usb Driver version 1.0.0

[ 61.128000] rausb0: no IPv6 routers present

[ 132.480000] RT25usb Driver version 1.0.0

[ 137.796000] RT25usb Driver version 1.0.0

[ 149.820000] rausb0: no IPv6 routers present

[ 498.996000] Sound Blaster 16 soundcard not found or device busy

[ 498.996000] In case, if you have AWE card, try snd-sbawe module

magnus@magnus-desktop:~$

Endret 26. september 2007 av killer92

[Sokkalf™]

Vil nesten tro at du enten har et ganske "sært" lydkort, eller at det rett og slett er ødelagt.

[kaasa92]

Hvordan kan det ha blitt ødelagt? Funket før jeg innstalerte ubuntu.

[Sokkalf™]

Jeg vet ikke jeg, men det virker jo åpenbart ikke i Ubuntu nå..

 

[ 25.582693] isapnp: Scanning for PnP cards...

[ 25.936847] isapnp: No Plug & Play device found

Så det er enten ødelagt, eller så er det ikke et Plug&Play-kort, noe som betyr at du må vite nøyaktig hva slags kort det er, og hvilken hardwareadresse, IRQ og DMA det bruker, før vi kan hjelpe deg med å finne en driver som virker.