Feil frekvens (CPU eller Mem) i CMOS setup

[Spite/Ron Turbo]

Har fått følgende melding siden jeg satt sammen PC-en:

"please reset cpu or memory frequency in the cmos setup"

 

PC-en fungerer greit likevel (jeg kan gå videre), men noe er jo tydeligvis galt innstilt.

 

Hardware

XFX nForce 680i SLI, nForce-680i SLI

XFX GeForce 8800GTS 500M 320MB GDDR3

Intel Core 2 Duo E6750 2.67GHz 1333Mhz

Crucial DDR2 BallistiX PC6400 2048MB CL4

 

Har funnet følgende info i BIOS:(Sikkert mer info enn nødvendig, men jeg har ikke peil)

 

System Clocks

(1. verdi: Setting, 2. verdi: Current Value)

CPU Freq - 2133,3 - 2666,7

Fsb reference clock - 1066,7 - 1333,3

CPU Multiplier - Auto - 8x

 

PCIe x16_1 - Auto - 100

PCIe x16_2 - Auto - 100

PCIe x16_3 - Auto - 100

SPP <-> Ref clock - Auto - 200

 

nforce SPP --> nforce MCP - 5x

nforce SPP <-- nforce MCP - 5x

 

CPU Spread Spectrum - disabled

HT Spread Spectrum - disabled

PCIe Spread Spectrum (SPP) - Auto

PCIe Spread Spectrum (MCP) - disabled

SATA Spread Spectrum - disabled

 

 

FSB Memory Config

 

SLI-Ready Memory - CPUOC 0% - Enable

CPU Freq - 2133,3 - 2666,7

CPU Multiplier - 8x - 8x

FSB Memory Clock Mode - Unlinked

FSB Memory Ratio - Auto

FSB (QDR) - 1067 - 1333,3

Actual FSB (QDR) - 1066,7

MEM (DDR) - 800 - 800

Actual MEM (DDR) - 800

 

Memory Time Settings

Memory timing setting - OPTIMAL

 

tCL (CAS LATENCY) - Auto(4) - 4

tRCD - Auto(4) - 4

tRP - Auto(4) - 4

tRAS - Auto(12) - 12

Command Per Clock (CMD) - Auto(2T) - 2T

 

 

CPU Configuration

 

Limit CPUID MaxVal - Disabled

Intel SpeedStep - Disabled

PPM Mode - Native Mode

CPU Thermal Mode - Disabled

CIE Enhanced Halt State - Enabled

Execute disable Bit - Enabled

Virtualization Technilogy - Enabled

 

System Voltages

CPU Core - Auto - 1,31V

CPU FSB - Auto - 1,2V

Memory - Auto - 2,200V

nForce SPP - Auto - 1,40V

 

PS! Trenger detaljert hjelp. Min forrige PC er over 5 år gammel, så jeg er ikke vant til hardware innstillinger i det hele tatt.