Gå til innhold

problemer med ati driver

Tee_Kay

Av Tee_Kay
i Operativsystemer

Anbefalte innlegg

Iminzilion

Iminzilion

Skrevet
Skrevet

Men. burde det ikkje egentlig fungert?

La inn skjermkort driveren hos han akkurat likt som jeg gjor på min.

Og vi kjører begge slackware current.

 

Men. står noe om via der... Er det noe med hovedkortet som ikkje er villig ?

Videoannonse

Videoannonse
Annonse
objorkum

objorkum

Skrevet
Skrevet

olear: Stemmer

 

Virkar som om agpgart ikkje klarar å finne skjermkortet ditt på ein eller annan måte.

 

For å få litt meir info, køyr (som root):

 

tail -n 300 /var/log/Xorg.0.log|grep fglrx

 

og

 

tail -n 300 /var/log/messages|grep fglrx

Tee_Kay

Tee_Kay

Skrevet
  • Forfatter
Skrevet

tail -n 300 /var/log/Xorg.0.log|grep fglrx sa:

 

root@gudane:/home/teekay# tail -n 300 /var/log/Xorg.0.log|grep fglrx
(II) fglrx(0): Internal Desktop Setting: 0x00000004
(**) fglrx(0):  PseudoColor visuals disabled
(==) fglrx(0): Using gamma correction (1.0, 1.0, 1.0)
(**) fglrx(0): Center Mode is disabled
(==) fglrx(0): TMDS coherent mode is enabled
(II) fglrx(0): Total of 10 modes found for primary display.
(--) fglrx(0): Virtual size is 1280x1024 (pitch 1280)
(**) fglrx(0): *Mode "1280x1024": 108.0 MHz (scaled from 0.0 MHz), 64.0 kHz, 60.0 Hz
(II) fglrx(0): Modeline "1280x1024"  108.00  1280 1328 1440 1688  1024 1025 1028 1066
(**) fglrx(0):  Default mode "1152x864": 81.6 MHz (scaled from 0.0 MHz), 53.7 kHz, 60.0 Hz
(II) fglrx(0): Modeline "1152x864"   81.62  1152 1216 1336 1520  864 865 868 895
(**) fglrx(0):  Default mode "1024x768": 65.0 MHz (scaled from 0.0 MHz), 48.4 kHz, 60.0 Hz
(II) fglrx(0): Modeline "1024x768"   65.00  1024 1048 1184 1344  768 771 777 806
(**) fglrx(0):  Default mode "800x600": 40.0 MHz (scaled from 0.0 MHz), 37.9 kHz, 60.0 Hz
(II) fglrx(0): Modeline "800x600"   40.00  800 840 968 1056  600 601 605 628
(**) fglrx(0):  Default mode "640x480": 25.2 MHz (scaled from 0.0 MHz), 31.5 kHz, 60.0 Hz
(II) fglrx(0): Modeline "640x480"   25.18  640 656 752 800  480 490 492 525
(**) fglrx(0):  Default mode "640x400": 24.9 MHz (scaled from 0.0 MHz), 31.5 kHz, 60.0 Hz
(II) fglrx(0): Modeline "640x400"   24.92  640 664 760 792  400 460 462 525 -hsync -vsync
(**) fglrx(0):  Default mode "512x384": 19.8 MHz (scaled from 0.0 MHz), 29.8 kHz, 60.0 Hz
(II) fglrx(0): Modeline "512x384"   19.81  512 544 624 664  384 451 453 497 -hsync
(**) fglrx(0):  Default mode "400x300": 22.3 MHz (scaled from 0.0 MHz), 45.0 kHz, 60.0 Hz
(II) fglrx(0): Modeline "400x300"   22.33  400 416 480 496  600 601 605 742 -hsync
(**) fglrx(0):  Default mode "320x240": 12.6 MHz (scaled from 0.0 MHz), 31.5 kHz, 60.0 Hz
(II) fglrx(0): Modeline "320x240"   12.59  320 328 376 400  480 491 493 525 -hsync
(**) fglrx(0):  Default mode "320x200": 12.6 MHz (scaled from 0.0 MHz), 31.5 kHz, 60.0 Hz
(II) fglrx(0): Modeline "320x200"   12.59  320 336 384 400  400 457 459 524 -hsync -vsync
(--) fglrx(0): Display dimensions: (340, 270) mm
(--) fglrx(0): DPI set to (95, 96)
(**) fglrx(0): NoAccel = NO
(==) fglrx(0): HPV inactive
(==) fglrx(0): FSAA enabled: NO
(**) fglrx(0): FSAA Gamma enabled
(**) fglrx(0): FSAA Multisample Position is fix
(**) fglrx(0): NoDRI = NO
(II) Loading sub module "fglrxdrm"
(II) LoadModule: "fglrxdrm"
(II) Loading /usr/X11R6/lib/modules/linux/libfglrxdrm.a
(II) Module fglrxdrm: vendor="FireGL - ATI Technologies Inc."
(II) fglrx(0): Depth moves disabled by default
(**) fglrx(0): Capabilities: 0x00000000
(**) fglrx(0): CapabilitiesEx: 0x00000000
(**) fglrx(0): cpuFlags: 0x8000001d
(**) fglrx(0): cpuSpeedMHz: 0x00000a77
(==) fglrx(0): OpenGL ClientDriverName: "fglrx_dri.so"
(**) fglrx(0): using built in AGPGART module: no
(**) fglrx(0): UseFastTLS=0
(**) fglrx(0): BlockSignalsOnLock=1
(==) fglrx(0): EnablePrivateBackZ = NO
(II) fglrx(0): UMM Bus area:     0xe8701000 (size=0x078ff000)
(II) fglrx(0): UMM area:     0xe8701000 (size=0x078ff000)
(II) fglrx(0): driver needs X.org 6.8.x.y with x.y >= 0.0
(II) fglrx(0): detected X.org 6.8.2.0
(II) fglrx(0): doing DRIScreenInit
(II) fglrx(0): [drm] DRM interface version 1.0
(II) fglrx(0): [drm] created "fglrx" driver at busid "PCI:1:0:0"
(II) fglrx(0): [drm] added 8192 byte SAREA at 0xf8d08000
(II) fglrx(0): [drm] mapped SAREA 0xf8d08000 to 0x40024000
(II) fglrx(0): [drm] framebuffer handle = 0xe8000000
(II) fglrx(0): [drm] added 1 reserved context for kernel
(II) fglrx(0): DRIScreenInit done
(II) fglrx(0): Kernel Module Version Information:
(II) fglrx(0):     Name: fglrx
(II) fglrx(0):     Version: 8.16.20
(II) fglrx(0):     Date: Aug 16 2005
(II) fglrx(0):     Desc: ATI FireGL DRM kernel module
(II) fglrx(0): Kernel Module version matches driver.
(II) fglrx(0): Kernel Module Build Time Information:
(II) fglrx(0):     Build-Kernel UTS_RELEASE:        2.4.31
(II) fglrx(0):     Build-Kernel MODVERSIONS:        no
(II) fglrx(0):     Build-Kernel __SMP__:            no
(II) fglrx(0):     Build-Kernel PAGE_SIZE:          0x1000
(II) fglrx(0): [drm] register handle = 0xf9000000
(EE) fglrx(0): [agp] unable to acquire AGP, error "xf86_ENODEV"
(EE) fglrx(0): cannot init AGP
(II) fglrx(0): [drm] removed 1 reserved context for kernel
(II) fglrx(0): [drm] unmapping 8192 bytes of SAREA 0xf8d08000 at 0x40024000
(WW) fglrx(0): ***********************************************
(WW) fglrx(0): * DRI initialization failed!                  *
(WW) fglrx(0): * (maybe driver kernel module missing or bad) *
(WW) fglrx(0): * 2D acceleraton available (MMIO)             *
(WW) fglrx(0): * no 3D acceleration available                *
(WW) fglrx(0): ********************************************* *
(II) fglrx(0): FBADPhys: 0xe8000000 FBMappedSize: 0x08000000
(II) fglrx(0): FBMM initialized for area (0,0)-(1280,8191)
(II) fglrx(0): FBMM auto alloc for area (0,0)-(1280,1024) (front color buffer - assumption)
(==) fglrx(0): Backing store disabled
(==) fglrx(0): Silken mouse enabled
(II) fglrx(0): Using hardware cursor (scanline 1024)
(II) fglrx(0): Largest offscreen area available: 1280 x 7163
(II) fglrx(0): Using XFree86 Acceleration Architecture (XAA)
(II) fglrx(0): Acceleration enabled
(II) fglrx(0): Direct rendering disabled

 

Og tail -n 300 /var/log/messages|grep fglrx sa:

root@gudane:/home/teekay# tail -n 300 /var/log/messages|grep fglrx
Aug 20 01:33:24 gudane kernel: [fglrx] Maximum main memory to use for locked dma buffers: 803 MBytes.
Aug 20 01:33:24 gudane kernel: [fglrx] module loaded - fglrx 8.16.20 [Aug 16 2005] on minor 0

olear

olear

Skrevet
Skrevet

Så litt rundt på en del forum og flere har hatt problemer med dette. Det viser seg at det har vært noen bugs i driveren til VIA PT880. De som hadde problemer kjørte 2.6.8 og 2.6.9. Så ingenting ang. 2.4.31. Tror kanskje du bør prøve 2.6.12 som ligger i testing.

objorkum

objorkum

Skrevet
Skrevet

Du bør endre denne tilbake igjen:

 

Option "UseInternalAGPGART"         "no"

 

Til:

 

Option "UseInternalAGPGART"         "yes"

 

Sidan du ikkje har agpgart. Kan du gjere det, restarte X, og så poste dei to kommandoane på nytt?

Tee_Kay

Tee_Kay

Skrevet
  • Forfatter
Skrevet

Nå kom: 

root@gudane:/home/teekay# tail -n 300 /var/log/messages|grep fglrx
Aug 20 01:33:24 gudane kernel: [fglrx] Maximum main memory to use for locked dma buffers: 803 MBytes.
Aug 20 01:33:24 gudane kernel: [fglrx] module loaded - fglrx 8.16.20 [Aug 16 2005] on minor 0
root@gudane:/home/teekay# tail -n 300 /var/log/Xorg.0.log|grep fglrx
(II) fglrx(0): Primary Controller - DFP on internal TMDS
(II) fglrx(0): Internal Desktop Setting: 0x00000004
(**) fglrx(0):  PseudoColor visuals disabled
(==) fglrx(0): Using gamma correction (1.0, 1.0, 1.0)
(**) fglrx(0): Center Mode is disabled
(==) fglrx(0): TMDS coherent mode is enabled
(II) fglrx(0): Total of 10 modes found for primary display.
(--) fglrx(0): Virtual size is 1280x1024 (pitch 1280)
(**) fglrx(0): *Mode "1280x1024": 108.0 MHz (scaled from 0.0 MHz), 64.0 kHz, 60.0 Hz
(II) fglrx(0): Modeline "1280x1024"  108.00  1280 1328 1440 1688  1024 1025 1028 1066
(**) fglrx(0):  Default mode "1152x864": 81.6 MHz (scaled from 0.0 MHz), 53.7 kHz, 60.0 Hz
(II) fglrx(0): Modeline "1152x864"   81.62  1152 1216 1336 1520  864 865 868 895
(**) fglrx(0):  Default mode "1024x768": 65.0 MHz (scaled from 0.0 MHz), 48.4 kHz, 60.0 Hz
(II) fglrx(0): Modeline "1024x768"   65.00  1024 1048 1184 1344  768 771 777 806
(**) fglrx(0):  Default mode "800x600": 40.0 MHz (scaled from 0.0 MHz), 37.9 kHz, 60.0 Hz
(II) fglrx(0): Modeline "800x600"   40.00  800 840 968 1056  600 601 605 628
(**) fglrx(0):  Default mode "640x480": 25.2 MHz (scaled from 0.0 MHz), 31.5 kHz, 60.0 Hz
(II) fglrx(0): Modeline "640x480"   25.18  640 656 752 800  480 490 492 525
(**) fglrx(0):  Default mode "640x400": 24.9 MHz (scaled from 0.0 MHz), 31.5 kHz, 60.0 Hz
(II) fglrx(0): Modeline "640x400"   24.92  640 664 760 792  400 460 462 525 -hsync -vsync
(**) fglrx(0):  Default mode "512x384": 19.8 MHz (scaled from 0.0 MHz), 29.8 kHz, 60.0 Hz
(II) fglrx(0): Modeline "512x384"   19.81  512 544 624 664  384 451 453 497 -hsync
(**) fglrx(0):  Default mode "400x300": 22.3 MHz (scaled from 0.0 MHz), 45.0 kHz, 60.0 Hz
(II) fglrx(0): Modeline "400x300"   22.33  400 416 480 496  600 601 605 742 -hsync
(**) fglrx(0):  Default mode "320x240": 12.6 MHz (scaled from 0.0 MHz), 31.5 kHz, 60.0 Hz
(II) fglrx(0): Modeline "320x240"   12.59  320 328 376 400  480 491 493 525 -hsync
(**) fglrx(0):  Default mode "320x200": 12.6 MHz (scaled from 0.0 MHz), 31.5 kHz, 60.0 Hz
(II) fglrx(0): Modeline "320x200"   12.59  320 336 384 400  400 457 459 524 -hsync -vsync
(--) fglrx(0): Display dimensions: (340, 270) mm
(--) fglrx(0): DPI set to (95, 96)
(**) fglrx(0): NoAccel = NO
(==) fglrx(0): HPV inactive
(==) fglrx(0): FSAA enabled: NO
(**) fglrx(0): FSAA Gamma enabled
(**) fglrx(0): FSAA Multisample Position is fix
(**) fglrx(0): NoDRI = NO
(II) Loading sub module "fglrxdrm"
(II) LoadModule: "fglrxdrm"
(II) Loading /usr/X11R6/lib/modules/linux/libfglrxdrm.a
(II) Module fglrxdrm: vendor="FireGL - ATI Technologies Inc."
(II) fglrx(0): Depth moves disabled by default
(**) fglrx(0): Capabilities: 0x00000000
(**) fglrx(0): CapabilitiesEx: 0x00000000
(**) fglrx(0): cpuFlags: 0x8000001d
(**) fglrx(0): cpuSpeedMHz: 0x00000a77
(==) fglrx(0): OpenGL ClientDriverName: "fglrx_dri.so"
(**) fglrx(0): using built in AGPGART module: yes
(**) fglrx(0): UseFastTLS=0
(**) fglrx(0): BlockSignalsOnLock=1
(==) fglrx(0): EnablePrivateBackZ = NO
(II) fglrx(0): UMM Bus area:     0xe8701000 (size=0x078ff000)
(II) fglrx(0): UMM area:     0xe8701000 (size=0x078ff000)
(II) fglrx(0): driver needs X.org 6.8.x.y with x.y >= 0.0
(II) fglrx(0): detected X.org 6.8.2.0
(II) fglrx(0): doing DRIScreenInit
(II) fglrx(0): [drm] DRM interface version 1.0
(II) fglrx(0): [drm] created "fglrx" driver at busid "PCI:1:0:0"
(II) fglrx(0): [drm] added 8192 byte SAREA at 0xf8d12000
(II) fglrx(0): [drm] mapped SAREA 0xf8d12000 to 0x40024000
(II) fglrx(0): [drm] framebuffer handle = 0xe8000000
(II) fglrx(0): [drm] added 1 reserved context for kernel
(II) fglrx(0): DRIScreenInit done
(II) fglrx(0): Kernel Module Version Information:
(II) fglrx(0):     Name: fglrx
(II) fglrx(0):     Version: 8.16.20
(II) fglrx(0):     Date: Aug 16 2005
(II) fglrx(0):     Desc: ATI FireGL DRM kernel module
(II) fglrx(0): Kernel Module version matches driver.
(II) fglrx(0): Kernel Module Build Time Information:
(II) fglrx(0):     Build-Kernel UTS_RELEASE:        2.4.31
(II) fglrx(0):     Build-Kernel MODVERSIONS:        no
(II) fglrx(0):     Build-Kernel __SMP__:            no
(II) fglrx(0):     Build-Kernel PAGE_SIZE:          0x1000
(II) fglrx(0): [drm] register handle = 0xf9000000
(EE) fglrx(0): [agp] unable to acquire AGP, error "xf86_ENODEV"
(EE) fglrx(0): cannot init AGP
(II) fglrx(0): [drm] removed 1 reserved context for kernel
(II) fglrx(0): [drm] unmapping 8192 bytes of SAREA 0xf8d12000 at 0x40024000
(WW) fglrx(0): ***********************************************
(WW) fglrx(0): * DRI initialization failed!                  *
(WW) fglrx(0): * (maybe driver kernel module missing or bad) *
(WW) fglrx(0): * 2D acceleraton available (MMIO)             *
(WW) fglrx(0): * no 3D acceleration available                *
(WW) fglrx(0): ********************************************* *
(II) fglrx(0): FBADPhys: 0xe8000000 FBMappedSize: 0x08000000
(II) fglrx(0): FBMM initialized for area (0,0)-(1280,8191)
(II) fglrx(0): FBMM auto alloc for area (0,0)-(1280,1024) (front color buffer - assumption)
(==) fglrx(0): Backing store disabled
(==) fglrx(0): Silken mouse enabled
(II) fglrx(0): Using hardware cursor (scanline 1024)
(II) fglrx(0): Largest offscreen area available: 1280 x 7163
(II) fglrx(0): Using XFree86 Acceleration Architecture (XAA)
(II) fglrx(0): Acceleration enabled
(II) fglrx(0): Direct rendering disabled

objorkum

objorkum

Skrevet
Skrevet (endret)
Om jeg skal installere 2.6.12 er det ikke en hau med drivere jeg må ha da ?

Hæ? Drivarar som du har lagt inn, slik som ATI-drivaren, må du legge inn på nytt. Resten er inkludert i kjerna.

Endret av objorkum

Opprett en konto eller logg inn for å kommentere

Du må være et medlem for å kunne skrive en kommentar

Opprett konto

Det er enkelt å melde seg inn for å starte en ny konto!

Start en konto

Logg inn

Har du allerede en konto? Logg inn her.

Logg inn nå
Gå til emneliste

  • Hvem er aktive   0 medlemmer

    • Ingen innloggede medlemmer aktive
×
×
  • Opprett ny...