Gå til innhold

"Din side" har ikke peiling...


Anbefalte innlegg

Videoannonse
Annonse
Mener han som har skrevet innlegget at prosessoren bruker 12V?

Prosessoren bruker 12V

table1.jpg

 

Bruker, under load, opp til 10-11 amper...

 

Well we know that BIOS post run the CPU at pretty high load sometimes in the process .

We also know that next to no-one can get their comp to post with a PSU w/+12v=12A .

All this point to that the 90W is idle power .

And in a caltulating sheet the cpu should be upped to reflect full load consumption ,

afterall the purpose of the cpu is to do something - not just sit there and be idle .

 

In anandtecs test the load test on the single 90nm CPU suggests ~ 10-11A .

And with the 130nm (FX) is alot worse and this must also be concidered .

 

90nm : 7,5A - 11A

130nm FX-55  : 9,5A - 13,5A

Other 130nm : 8,5A - 12,5A (i guess)

Reply;

So recalculating based on full load cpu say 11A

 

18.84A + 11A - 7.4A = 22.44A Restated Component load.

22.44A +20% = 26.9A

Endret av Okay
Lenke til kommentar
Gjest
Dette emnet er stengt for flere svar.
  • Hvem er aktive   0 medlemmer

    • Ingen innloggede medlemmer aktive
×
×
  • Opprett ny...