[Ubuntu server 11.4] Mistet software RAID 5 etter strømbrudd. Hvordan gjenopprette?

[Mr. Purple]

Hei

 

Har en server som kjører ubuntu server 11.4, hvor jeg har tre stk 2tb disker satt opp i et software raid 5.

Problemet er at etter et strømbrudd finner jeg ikke software raidet. Jeg vil sette det opp på nytt, men jeg er redd for å miste det jeg har lagret på disk. Noen som har en trygg framgang for å sette opp raidet igjen, uten å miste det jeg har lagret?

 

 

 

Print av fdisk -l

sudo fdisk -l

Disk /dev/sda: 2000.4 GB, 2000398934016 bytes
255 heads, 63 sectors/track, 243201 cylinders
Units = cylinders of 16065 * 512 = 8225280 bytes
Sector size (logical/physical): 512 bytes / 512 bytes
I/O size (minimum/optimal): 512 bytes / 512 bytes
Disk identifier: 0x7a9d8eaa

  Device Boot      Start         End      Blocks   Id  System
/dev/sda1               1      243201  1953512001   fd  Linux raid autodetect

Disk /dev/sdc: 500.1 GB, 500107862016 bytes
255 heads, 63 sectors/track, 60801 cylinders
Units = cylinders of 16065 * 512 = 8225280 bytes
Sector size (logical/physical): 512 bytes / 512 bytes
I/O size (minimum/optimal): 512 bytes / 512 bytes
Disk identifier: 0x00021b44

  Device Boot      Start         End      Blocks   Id  System
/dev/sdc1   *           1       60410   485239808   83  Linux
/dev/sdc2           60410       60802     3143681    5  Extended
/dev/sdc5           60410       60802     3143680   82  Linux swap / Solaris

Disk /dev/sdb: 2000.4 GB, 2000398934016 bytes
255 heads, 63 sectors/track, 243201 cylinders
Units = cylinders of 16065 * 512 = 8225280 bytes
Sector size (logical/physical): 512 bytes / 512 bytes
I/O size (minimum/optimal): 512 bytes / 512 bytes
Disk identifier: 0x8dfcb192

  Device Boot      Start         End      Blocks   Id  System
/dev/sdb1               1      243201  1953512001   fd  Linux raid autodetect

Disk /dev/sdd: 2000.4 GB, 2000398934016 bytes
255 heads, 63 sectors/track, 243201 cylinders
Units = cylinders of 16065 * 512 = 8225280 bytes
Sector size (logical/physical): 512 bytes / 512 bytes
I/O size (minimum/optimal): 512 bytes / 512 bytes
Disk identifier: 0x859ba1eb

  Device Boot      Start         End      Blocks   Id  System
/dev/sdd1               1      243201  1953512001   fd  Linux raid autodetect

Endret 6. september 2011 av cyclo
Emnetittel forbedret

[Mr. Purple]

Litt mer info:

Softwareraidet er satt opp med mdadm.

Har prøvd dette:

sudo mdadm --assemble --scan
mdadm: No arrays found in config file or automatically

 

Som dere ser er arrayet borte.

 

Prøvde å bygge opp raidet igjen men fikk følgende:

$ sudo mdadm --build -c512 --raid-devices=3 /dev/md1 /dev/sda1 /dev/sdb1 /dev/sdd1
mdadm: Cannot find /dev/sda1: No such file or directory

 

Setter stor pris på alle svar

[[Infected]]

har du sjekket om mdadm gjenkjenner superblokken paa diskene?

mdadm --examine /dev/sdx

 

om mdadm gjenkjenner superblokken kan du prove aa ta opp arrayet manuelt

mdadm --assemble /dev/mdX /dev/sdX1 /dev/sdY2

 

etter du har tatt opp arrayet kan du generere en ny config, eller evt. kan du fylle inn informasjonen om arrayet i mdadm.conf selv

mdadm --examine --scan >> /etc/mdadm.conf

[Mr. Purple]

Takk for svar [infected]

 

-- examine blir bare stående uten å gi noe output og blir aldri ferdig og jeg må avbryte den

 

Ved manuell assemble finner den ikke /dev/sda1 No such file or directory, jeg tror det er her problemet ligger.. selv om sda1, sdb1 og sdd1 kommer opp i fdisk ligger de ikke i /dev/. Hadde de gjort det kunne jeg ha brukt build eller create for å få tilbake raidet.

 

Setter som sagt stor pris på alle svar

[[Infected]]

du sier device noden for /dev/sda er gjenkjent av fdisk, men ikke av mdadm?

hva er egentlig dmesg's output om diskene, evt. etter du har provd aa kjore mdadm, feiler '--examine' paa alle diskene, eller bare sda?

 

om det bare er 'sda' som mangler kan du ta opp arrayet med '--assemble --run (--force)' selv om ikke alle diskene skulle vare tilstede.

 

vaer obs paa at om du kjorer '--create' paa en eksisterende superblokk, vil denne overskrives.. '--build' bor bare brukes om superblokk eller metadata til arryet er blitt korrupt..

Endret 3. august 2011 av [Infected]

[Mr. Purple]

--examine failer på alle tre diskene.

 

cat /proc/mdstat gir følgende:

$ cat /proc/mdstat
Personalities : [linear] [multipath] [raid0] [raid1] [raid6] [raid5] [raid4] [raid10] 
unused devices: <none>

 

Her pleide arryaet md0 å stå.

 

Jeg ser at jeg i min forrige post sa at --assemble gir: No such file or directory, feilen er som følgende:

 sudo mdadm --assemble /dev/md10 /dev/sda1 /dev/sdb1 /dev/sdd1
mdadm: cannot open device /dev/sda1: No such file or directory
mdadm: /dev/sda1 has no superblock - assembly aborted

 

Vil det da si at jeg må gjennopprette superblock på disse diskene? Jeg har googlet dette men jeg finner ingen guide som fungerer for meg.

 

Her er en print av hele dmges

 

dmesg
[    0.000000] Initializing cgroup subsys cpuset
[    0.000000] Initializing cgroup subsys cpu
[    0.000000] Linux version 2.6.38-10-server (buildd@yellow) (gcc version 4.5.2 (Ubuntu/Linaro 4.5.2-8ubuntu4) ) #46-Ubuntu SMP Tue Jun 28 16:31:00 UTC 2011 (Ubuntu 2.6.38-10.46-server 2.6.38.7)
[    0.000000] Command line: BOOT_IMAGE=/boot/vmlinuz-2.6.38-10-server root=UUID=955e7895-a780-41b4-bb64-bbe40521bc96 ro quiet
[    0.000000] BIOS-provided physical RAM map:
[    0.000000]  BIOS-e820: 0000000000000000 - 000000000009f800 (usable)
[    0.000000]  BIOS-e820: 000000000009f800 - 00000000000a0000 (reserved)
[    0.000000]  BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved)
[    0.000000]  BIOS-e820: 0000000000100000 - 00000000bfff0000 (usable)
[    0.000000]  BIOS-e820: 00000000bfff0000 - 00000000bfff3000 (ACPI NVS)
[    0.000000]  BIOS-e820: 00000000bfff3000 - 00000000c0000000 (ACPI data)
[    0.000000]  BIOS-e820: 00000000e0000000 - 00000000f0000000 (reserved)
[    0.000000]  BIOS-e820: 00000000fec00000 - 0000000100000000 (reserved)
[    0.000000] NX (Execute Disable) protection: active
[    0.000000] DMI 2.3 present.
[    0.000000] DMI: System manufacturer System Product Name/A8N-SLI DELUXE, BIOS ASUS A8N-SLI DELUXE BIOS Revision 1012-001 06/22/2005
[    0.000000] e820 update range: 0000000000000000 - 0000000000010000 (usable) ==> (reserved)
[    0.000000] e820 remove range: 00000000000a0000 - 0000000000100000 (usable)
[    0.000000] No AGP bridge found
[    0.000000] last_pfn = 0xbfff0 max_arch_pfn = 0x400000000
[    0.000000] MTRR default type: uncachable
[    0.000000] MTRR fixed ranges enabled:
[    0.000000]   00000-9FFFF write-back
[    0.000000]   A0000-BFFFF uncachable
[    0.000000]   C0000-C7FFF write-protect
[    0.000000]   C8000-FFFFF uncachable
[    0.000000] MTRR variable ranges enabled:
[    0.000000]   0 base 0000000000 mask FF80000000 write-back
[    0.000000]   1 base 0080000000 mask FFC0000000 write-back
[    0.000000]   2 disabled
[    0.000000]   3 disabled
[    0.000000]   4 disabled
[    0.000000]   5 disabled
[    0.000000]   6 disabled
[    0.000000]   7 disabled
[    0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
[    0.000000] found SMP MP-table at [ffff8800000f5a70] f5a70
[    0.000000] initial memory mapped : 0 - 20000000
[    0.000000] init_memory_mapping: 0000000000000000-00000000bfff0000
[    0.000000]  0000000000 - 00bfe00000 page 2M
[    0.000000]  00bfe00000 - 00bfff0000 page 4k
[    0.000000] kernel direct mapping tables up to bfff0000 @ 1fffb000-20000000
[    0.000000] RAMDISK: 36114000 - 37082000
[    0.000000] ACPI: RSDP 00000000000f7e00 00014 (v00 Nvidia)
[    0.000000] ACPI: RSDT 00000000bfff3040 00038 (v01 Nvidia AWRDACPI 42302E31 AWRD 00000000)
[    0.000000] ACPI: FACP 00000000bfff30c0 00074 (v01 Nvidia AWRDACPI 42302E31 AWRD 00000000)
[    0.000000] ACPI: DSDT 00000000bfff3180 06605 (v01 NVIDIA AWRDACPI 00001000 MSFT 0100000E)
[    0.000000] ACPI: FACS 00000000bfff0000 00040
[    0.000000] ACPI: SSDT 00000000bfff98c0 000D6 (v01 PTLTD  POWERNOW 00000001  LTP 00000001)
[    0.000000] ACPI: SRAT 00000000bfff9a00 00090 (v01 AMD    HAMMER   00000001 AMD  00000001)
[    0.000000] ACPI: MCFG 00000000bfff9b00 0003C (v01 Nvidia AWRDACPI 42302E31 AWRD 00000000)
[    0.000000] ACPI: APIC 00000000bfff9800 0007C (v01 Nvidia AWRDACPI 42302E31 AWRD 00000000)
[    0.000000] ACPI: Local APIC address 0xfee00000
[    0.000000] SRAT: PXM 0 -> APIC 0x00 -> Node 0
[    0.000000] SRAT: Node 0 PXM 0 0-a0000
[    0.000000] SRAT: Node 0 PXM 0 100000-c0000000
[    0.000000] SRAT: Node 0 [0,a0000) + [100000,c0000000) -> [0,c0000000)
[    0.000000] NUMA: Using 63 for the hash shift.
[    0.000000] Initmem setup node 0 0000000000000000-00000000bfff0000
[    0.000000]   NODE_DATA [00000000bffeb000 - 00000000bffeffff]
[    0.000000]  [ffffea0000000000-ffffea00029fffff] PMD -> [ffff8800bc600000-ffff8800beffffff] on node 0
[    0.000000] Zone PFN ranges:
[    0.000000]   DMA      0x00000010 -> 0x00001000
[    0.000000]   DMA32    0x00001000 -> 0x00100000
[    0.000000]   Normal   empty
[    0.000000] Movable zone start PFN for each node
[    0.000000] early_node_map[2] active PFN ranges
[    0.000000]     0: 0x00000010 -> 0x0000009f
[    0.000000]     0: 0x00000100 -> 0x000bfff0
[    0.000000] On node 0 totalpages: 786303
[    0.000000]   DMA zone: 56 pages used for memmap
[    0.000000]   DMA zone: 6 pages reserved
[    0.000000]   DMA zone: 3921 pages, LIFO batch:0
[    0.000000]   DMA32 zone: 10696 pages used for memmap
[    0.000000]   DMA32 zone: 771624 pages, LIFO batch:31
[    0.000000] Nvidia board detected. Ignoring ACPI timer override.
[    0.000000] If you got timer trouble try acpi_use_timer_override
[    0.000000] ACPI: PM-Timer IO Port: 0x4008
[    0.000000] ACPI: Local APIC address 0xfee00000
[    0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
[    0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] disabled)
[    0.000000] ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
[    0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
[    0.000000] ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
[    0.000000] IOAPIC[0]: apic_id 2, version 17, address 0xfec00000, GSI 0-23
[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[    0.000000] ACPI: BIOS IRQ0 pin2 override ignored.
[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 14 global_irq 14 high edge)
[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 15 global_irq 15 high edge)
[    0.000000] ACPI: IRQ9 used by override.
[    0.000000] ACPI: IRQ14 used by override.
[    0.000000] ACPI: IRQ15 used by override.
[    0.000000] Using ACPI (MADT) for SMP configuration information
[    0.000000] SMP: Allowing 2 CPUs, 1 hotplug CPUs
[    0.000000] nr_irqs_gsi: 40
[    0.000000] PM: Registered nosave memory: 000000000009f000 - 00000000000a0000
[    0.000000] PM: Registered nosave memory: 00000000000a0000 - 00000000000f0000
[    0.000000] PM: Registered nosave memory: 00000000000f0000 - 0000000000100000
[    0.000000] Allocating PCI resources starting at c0000000 (gap: c0000000:20000000)
[    0.000000] Booting paravirtualized kernel on bare hardware
[    0.000000] setup_percpu: NR_CPUS:256 nr_cpumask_bits:256 nr_cpu_ids:2 nr_node_ids:1
[    0.000000] PERCPU: Embedded 28 pages/cpu @ffff8800bfc00000 s84416 r8192 d22080 u1048576
[    0.000000] pcpu-alloc: s84416 r8192 d22080 u1048576 alloc=1*2097152
[    0.000000] pcpu-alloc: [0] 0 1 
[    0.000000] Built 1 zonelists in Node order, mobility grouping on.  Total pages: 775545
[    0.000000] Policy zone: DMA32
[    0.000000] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-2.6.38-10-server root=UUID=955e7895-a780-41b4-bb64-bbe40521bc96 ro quiet
[    0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes)
[    0.000000] Checking aperture...
[    0.000000] No AGP bridge found
[    0.000000] Node 0: aperture @ 51bc000000 size 32 MB
[    0.000000] Aperture beyond 4GB. Ignoring.
[    0.000000] Memory: 3072540k/3145664k available (6024k kernel code, 452k absent, 72672k reserved, 5024k data, 880k init)
[    0.000000] SLUB: Genslabs=15, HWalign=64, Order=0-3, MinObjects=0, CPUs=2, Nodes=1
[    0.000000] Hierarchical RCU implementation.
[    0.000000] 	RCU dyntick-idle grace-period acceleration is enabled.
[    0.000000] 	RCU-based detection of stalled CPUs is disabled.
[    0.000000] NR_IRQS:16640 nr_irqs:512 16
[    0.000000] spurious 8259A interrupt: IRQ7.
[    0.000000] Console: colour dummy device 80x25
[    0.000000] console [tty0] enabled
[    0.000000] allocated 31457280 bytes of page_cgroup
[    0.000000] please try 'cgroup_disable=memory' option if you don't want memory cgroups
[    0.000000] Fast TSC calibration using PIT
[    0.000000] Detected 2010.550 MHz processor.
[    0.000000] Marking TSC unstable due to TSCs unsynchronized
[    0.010007] Calibrating delay loop (skipped), value calculated using timer frequency.. 4021.10 BogoMIPS (lpj=20105500)
[    0.010013] pid_max: default: 32768 minimum: 301
[    0.010041] Security Framework initialized
[    0.010066] AppArmor: AppArmor initialized
[    0.010068] Yama: becoming mindful.
[    0.010638] Dentry cache hash table entries: 524288 (order: 10, 4194304 bytes)
[    0.023521] Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes)
[    0.025307] Mount-cache hash table entries: 256
[    0.025495] Initializing cgroup subsys ns
[    0.025499] ns_cgroup deprecated: consider using the 'clone_children' flag without the ns_cgroup.
[    0.025503] Initializing cgroup subsys cpuacct
[    0.025508] Initializing cgroup subsys memory
[    0.025520] Initializing cgroup subsys devices
[    0.025523] Initializing cgroup subsys freezer
[    0.025525] Initializing cgroup subsys net_cls
[    0.025528] Initializing cgroup subsys blkio
[    0.025571] tseg: 0000000000
[    0.025589] mce: CPU supports 5 MCE banks
[    0.025633] SMP alternatives: switching to UP code
[    0.033157] ACPI: Core revision 20110112
[    0.040016] ftrace: allocating 24620 entries in 97 pages
[    0.046914] Setting APIC routing to flat
[    0.047229] ..TIMER: vector=0x30 apic1=0 pin1=0 apic2=-1 pin2=-1
[    0.149627] CPU0: AMD Athlon(tm) 64 Processor 3200+ stepping 00
[    0.150000] Performance Events: AMD PMU driver.
[    0.150000] ... version:                0
[    0.150000] ... bit width:              48
[    0.150000] ... generic registers:      4
[    0.150000] ... value mask:             0000ffffffffffff
[    0.150000] ... max period:             00007fffffffffff
[    0.150000] ... fixed-purpose events:   0
[    0.150000] ... event mask:             000000000000000f
[    0.150000] Brought up 1 CPUs
[    0.150000] Total of 1 processors activated (4021.10 BogoMIPS).
[    0.150000] devtmpfs: initialized
[    0.150000] print_constraints: dummy: 
[    0.150000] Time: 17:45:30  Date: 08/05/11
[    0.150000] NET: Registered protocol family 16
[    0.150000] node 0 link 0: io port [1000, fffff]
[    0.150000] TOM: 00000000c0000000 aka 3072M
[    0.150000] node 0 link 0: mmio [e0000000, ef00ffff]
[    0.150000] node 0 link 0: mmio [feb00000, fec0ffff]
[    0.150000] node 0 link 0: mmio [a0000, bffff]
[    0.150000] node 0 link 0: mmio [c0000000, fed3ffff]
[    0.150000] bus: [00, ff] on node 0 link 0
[    0.150000] bus: 00 index 0 [io  0x0000-0xffff]
[    0.150000] bus: 00 index 1 [mem 0xc0000000-0xfcffffffff]
[    0.150000] bus: 00 index 2 [mem 0xfeb00000-0xfec0ffff]
[    0.150000] bus: 00 index 3 [mem 0x000a0000-0x000bffff]
[    0.150000] ACPI: bus type pci registered
[    0.150000] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
[    0.150000] PCI: MMCONFIG at [mem 0xe0000000-0xefffffff] reserved in E820
[    0.162771] PCI: Using configuration type 1 for base access
[    0.163879] bio: create slab <bio-0> at 0
[    0.165143] ACPI: EC: Look up EC in DSDT
[    0.170208] ACPI: Interpreter enabled
[    0.170212] ACPI: (supports S0 S1 S3 S4 S5)
[    0.170235] ACPI: Using IOAPIC for interrupt routing
[    0.176705] ACPI: No dock devices found.
[    0.176708] HEST: Table not found.
[    0.176712] PCI: Ignoring host bridge windows from ACPI; if necessary, use "pci=use_crs" and report a bug
[    0.176772] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
[    0.176893] pci_root PNP0A08:00: host bridge window [io  0x0000-0x0cf7] (ignored)
[    0.176897] pci_root PNP0A08:00: host bridge window [io  0x0d00-0xffff] (ignored)
[    0.176900] pci_root PNP0A08:00: host bridge window [mem 0x000a0000-0x000bffff] (ignored)
[    0.176903] pci_root PNP0A08:00: host bridge window [mem 0x000c0000-0x000dffff] (ignored)
[    0.176906] pci_root PNP0A08:00: host bridge window [mem 0xc0000000-0xfebfffff] (ignored)
[    0.176921] pci 0000:00:00.0: [10de:005e] type 0 class 0x000580
[    0.176986] pci 0000:00:01.0: [10de:0050] type 0 class 0x000601
[    0.177008] HPET not enabled in BIOS. You might try hpet=force boot option
[    0.177021] pci 0000:00:01.1: [10de:0052] type 0 class 0x000c05
[    0.177029] pci 0000:00:01.1: reg 10: [io  0xe400-0xe41f]
[    0.177042] pci 0000:00:01.1: reg 20: [io  0x4c00-0x4c3f]
[    0.177047] pci 0000:00:01.1: reg 24: [io  0x4c40-0x4c7f]
[    0.177058] pci 0000:00:01.1: PME# supported from D3hot D3cold
[    0.177061] pci 0000:00:01.1: PME# disabled
[    0.177078] pci 0000:00:02.0: [10de:005a] type 0 class 0x000c03
[    0.177086] pci 0000:00:02.0: reg 10: [mem 0xd4004000-0xd4004fff]
[    0.177109] pci 0000:00:02.0: supports D1 D2
[    0.177111] pci 0000:00:02.0: PME# supported from D0 D1 D2 D3hot D3cold
[    0.177115] pci 0000:00:02.0: PME# disabled
[    0.177128] pci 0000:00:02.1: [10de:005b] type 0 class 0x000c03
[    0.177137] pci 0000:00:02.1: reg 10: [mem 0xfeb00000-0xfeb000ff]
[    0.177163] pci 0000:00:02.1: supports D1 D2
[    0.177165] pci 0000:00:02.1: PME# supported from D0 D1 D2 D3hot D3cold
[    0.177169] pci 0000:00:02.1: PME# disabled
[    0.177187] pci 0000:00:04.0: [10de:0059] type 0 class 0x000401
[    0.177195] pci 0000:00:04.0: reg 10: [io  0xdc00-0xdcff]
[    0.177200] pci 0000:00:04.0: reg 14: [io  0xe000-0xe0ff]
[    0.177205] pci 0000:00:04.0: reg 18: [mem 0xd4003000-0xd4003fff]
[    0.177223] pci 0000:00:04.0: supports D1 D2
[    0.177235] pci 0000:00:06.0: [10de:0053] type 0 class 0x000101
[    0.177252] pci 0000:00:06.0: reg 20: [io  0xf000-0xf00f]
[    0.177275] pci 0000:00:07.0: [10de:0054] type 0 class 0x000101
[    0.177282] pci 0000:00:07.0: reg 10: [io  0x09f0-0x09f7]
[    0.177287] pci 0000:00:07.0: reg 14: [io  0x0bf0-0x0bf3]
[    0.177292] pci 0000:00:07.0: reg 18: [io  0x0970-0x0977]
[    0.177297] pci 0000:00:07.0: reg 1c: [io  0x0b70-0x0b73]
[    0.177302] pci 0000:00:07.0: reg 20: [io  0xd800-0xd80f]
[    0.177307] pci 0000:00:07.0: reg 24: [mem 0xd4002000-0xd4002fff]
[    0.177329] pci 0000:00:08.0: [10de:0055] type 0 class 0x000101
[    0.177337] pci 0000:00:08.0: reg 10: [io  0x09e0-0x09e7]
[    0.177341] pci 0000:00:08.0: reg 14: [io  0x0be0-0x0be3]
[    0.177346] pci 0000:00:08.0: reg 18: [io  0x0960-0x0967]
[    0.177351] pci 0000:00:08.0: reg 1c: [io  0x0b60-0x0b63]
[    0.177356] pci 0000:00:08.0: reg 20: [io  0xc400-0xc40f]
[    0.177361] pci 0000:00:08.0: reg 24: [mem 0xd4001000-0xd4001fff]
[    0.177380] pci 0000:00:09.0: [10de:005c] type 1 class 0x000604
[    0.177399] pci 0000:00:0a.0: [10de:0057] type 0 class 0x000680
[    0.177407] pci 0000:00:0a.0: reg 10: [mem 0xd4000000-0xd4000fff]
[    0.177412] pci 0000:00:0a.0: reg 14: [io  0xb000-0xb007]
[    0.177433] pci 0000:00:0a.0: supports D1 D2
[    0.177436] pci 0000:00:0a.0: PME# supported from D0 D1 D2 D3hot D3cold
[    0.177439] pci 0000:00:0a.0: PME# disabled
[    0.177452] pci 0000:00:0b.0: [10de:005d] type 1 class 0x000604
[    0.177475] pci 0000:00:0b.0: PME# supported from D0 D1 D2 D3hot D3cold
[    0.177478] pci 0000:00:0b.0: PME# disabled
[    0.177494] pci 0000:00:0c.0: [10de:005d] type 1 class 0x000604
[    0.177516] pci 0000:00:0c.0: PME# supported from D0 D1 D2 D3hot D3cold
[    0.177519] pci 0000:00:0c.0: PME# disabled
[    0.177534] pci 0000:00:0d.0: [10de:005d] type 1 class 0x000604
[    0.177556] pci 0000:00:0d.0: PME# supported from D0 D1 D2 D3hot D3cold
[    0.177559] pci 0000:00:0d.0: PME# disabled
[    0.177574] pci 0000:00:0e.0: [10de:005d] type 1 class 0x000604
[    0.177595] pci 0000:00:0e.0: PME# supported from D0 D1 D2 D3hot D3cold
[    0.177598] pci 0000:00:0e.0: PME# disabled
[    0.177618] pci 0000:00:18.0: [1022:1100] type 0 class 0x000600
[    0.177640] pci 0000:00:18.1: [1022:1101] type 0 class 0x000600
[    0.177659] pci 0000:00:18.2: [1022:1102] type 0 class 0x000600
[    0.177677] pci 0000:00:18.3: [1022:1103] type 0 class 0x000600
[    0.177697] PCI: peer root bus 00 res updated from pci conf
[    0.177724] pci 0000:05:0a.0: [1095:3114] type 0 class 0x000104
[    0.177735] pci 0000:05:0a.0: reg 10: [io  0x8000-0x8007]
[    0.177742] pci 0000:05:0a.0: reg 14: [io  0x8400-0x8403]
[    0.177749] pci 0000:05:0a.0: reg 18: [io  0x8800-0x8807]
[    0.177756] pci 0000:05:0a.0: reg 1c: [io  0x8c00-0x8c03]
[    0.177763] pci 0000:05:0a.0: reg 20: [io  0x9000-0x900f]
[    0.177770] pci 0000:05:0a.0: reg 24: [mem 0xd3005000-0xd30053ff]
[    0.177778] pci 0000:05:0a.0: reg 30: [mem 0x00000000-0x0007ffff pref]
[    0.177790] pci 0000:05:0a.0: supports D1 D2
[    0.177805] pci 0000:05:0b.0: [104c:8023] type 0 class 0x000c00
[    0.177817] pci 0000:05:0b.0: reg 10: [mem 0xd3004000-0xd30047ff]
[    0.177824] pci 0000:05:0b.0: reg 14: [mem 0xd3000000-0xd3003fff]
[    0.177861] pci 0000:05:0b.0: supports D1 D2
[    0.177864] pci 0000:05:0b.0: PME# supported from D0 D1 D2 D3hot
[    0.177867] pci 0000:05:0b.0: PME# disabled
[    0.177888] pci 0000:00:09.0: PCI bridge to [bus 05-05] (subtractive decode)
[    0.177891] pci 0000:00:09.0:   bridge window [io  0x8000-0x9fff]
[    0.177895] pci 0000:00:09.0:   bridge window [mem 0xd2000000-0xd3ffffff]
[    0.177898] pci 0000:00:09.0:   bridge window [mem 0xfff00000-0x000fffff pref] (disabled)
[    0.177902] pci 0000:00:09.0:   bridge window [io  0x0000-0xffff] (subtractive decode)
[    0.177905] pci 0000:00:09.0:   bridge window [mem 0xc0000000-0xfcffffffff] (subtractive decode)
[    0.177908] pci 0000:00:09.0:   bridge window [mem 0xfeb00000-0xfec0ffff] (subtractive decode)
[    0.177911] pci 0000:00:09.0:   bridge window [mem 0x000a0000-0x000bffff] (subtractive decode)
[    0.177932] pci 0000:00:0b.0: PCI bridge to [bus 04-04]
[    0.177936] pci 0000:00:0b.0:   bridge window [io  0xf000-0x0000] (disabled)
[    0.177939] pci 0000:00:0b.0:   bridge window [mem 0xfff00000-0x000fffff] (disabled)
[    0.177943] pci 0000:00:0b.0:   bridge window [mem 0xfff00000-0x000fffff pref] (disabled)
[    0.177978] pci 0000:03:00.0: [1002:954f] type 0 class 0x000300
[    0.177993] pci 0000:03:00.0: reg 10: [mem 0xc0000000-0xcfffffff 64bit pref]
[    0.178006] pci 0000:03:00.0: reg 18: [mem 0xd1000000-0xd100ffff 64bit]
[    0.178014] pci 0000:03:00.0: reg 20: [io  0xa000-0xa0ff]
[    0.178029] pci 0000:03:00.0: reg 30: [mem 0x00000000-0x0001ffff pref]
[    0.178048] pci 0000:03:00.0: supports D1 D2
[    0.178072] pci 0000:03:00.1: [1002:aa38] type 0 class 0x000403
[    0.178086] pci 0000:03:00.1: reg 10: [mem 0xd1010000-0xd1013fff 64bit]
[    0.178135] pci 0000:03:00.1: supports D1 D2
[    0.190015] pci 0000:00:0c.0: PCI bridge to [bus 03-03]
[    0.190019] pci 0000:00:0c.0:   bridge window [io  0xa000-0xafff]
[    0.190022] pci 0000:00:0c.0:   bridge window [mem 0xd0000000-0xd1ffffff]
[    0.190027] pci 0000:00:0c.0:   bridge window [mem 0xc0000000-0xcfffffff 64bit pref]
[    0.190047] pci 0000:00:0d.0: PCI bridge to [bus 02-02]
[    0.190051] pci 0000:00:0d.0:   bridge window [io  0xf000-0x0000] (disabled)
[    0.190054] pci 0000:00:0d.0:   bridge window [mem 0xfff00000-0x000fffff] (disabled)
[    0.190058] pci 0000:00:0d.0:   bridge window [mem 0xfff00000-0x000fffff pref] (disabled)
[    0.190078] pci 0000:00:0e.0: PCI bridge to [bus 01-01]
[    0.190082] pci 0000:00:0e.0:   bridge window [io  0xf000-0x0000] (disabled)
[    0.190085] pci 0000:00:0e.0:   bridge window [mem 0xfff00000-0x000fffff] (disabled)
[    0.190089] pci 0000:00:0e.0:   bridge window [mem 0xfff00000-0x000fffff pref] (disabled)
[    0.190101] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
[    0.190284] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.HUB0._PRT]
[    0.190512]  pci0000:00: Requesting ACPI _OSC control (0x1d)
[    0.229193] ACPI: PCI Interrupt Link [LNK1] (IRQs *3 4 5 7 9 10 11 12 14 15)
[    0.229254] ACPI: PCI Interrupt Link [LNK2] (IRQs 3 4 5 7 9 10 11 *12 14 15)
[    0.229312] ACPI: PCI Interrupt Link [LNK3] (IRQs 3 4 5 7 9 10 11 12 14 15) *0, disabled.
[    0.229367] ACPI: PCI Interrupt Link [LNK4] (IRQs 3 4 *5 7 9 10 11 12 14 15)
[    0.229420] ACPI: PCI Interrupt Link [LNK5] (IRQs 3 4 5 7 9 10 11 12 14 15) *0, disabled.
[    0.229473] ACPI: PCI Interrupt Link [LUBA] (IRQs 3 4 5 7 9 10 11 12 14 15) *0, disabled.
[    0.229526] ACPI: PCI Interrupt Link [LUBB] (IRQs 3 4 5 7 9 10 11 12 14 15) *0, disabled.
[    0.229582] ACPI: PCI Interrupt Link [LMAC] (IRQs 3 4 *5 7 9 10 11 12 14 15)
[    0.229636] ACPI: PCI Interrupt Link [LACI] (IRQs 3 4 5 7 9 10 *11 12 14 15)
[    0.229689] ACPI: PCI Interrupt Link [LMCI] (IRQs 3 4 5 7 9 10 11 12 14 15) *0, disabled.
[    0.229743] ACPI: PCI Interrupt Link [LSMB] (IRQs 3 4 5 7 9 10 11 12 14 15) *0, disabled.
[    0.229796] ACPI: PCI Interrupt Link [LUB2] (IRQs 3 4 5 7 9 10 11 12 14 15) *0, disabled.
[    0.229850] ACPI: PCI Interrupt Link [LIDE] (IRQs 3 4 5 7 9 10 11 12 14 15) *0, disabled.
[    0.229912] ACPI: PCI Interrupt Link [LSID] (IRQs 3 4 5 7 9 10 *11 12 14 15)
[    0.229977] ACPI: PCI Interrupt Link [LFID] (IRQs 3 4 *5 7 9 10 11 12 14 15)
[    0.230057] ACPI: PCI Interrupt Link [LPCA] (IRQs 3 4 5 7 9 10 11 12 14 15) *0, disabled.
[    0.230140] ACPI: PCI Interrupt Link [APC1] (IRQs 16) *0
[    0.230210] ACPI: PCI Interrupt Link [APC2] (IRQs 17) *0
[    0.230279] ACPI: PCI Interrupt Link [APC3] (IRQs 18) *0, disabled.
[    0.230350] ACPI: PCI Interrupt Link [APC4] (IRQs 19) *0
[    0.230385] ACPI: PCI Interrupt Link [APC5] (IRQs *16), disabled.
[    0.230463] ACPI: PCI Interrupt Link [APCF] (IRQs 20 21 22 23) *0, disabled.
[    0.230542] ACPI: PCI Interrupt Link [APCG] (IRQs 20 21 22 23) *0, disabled.
[    0.230620] ACPI: PCI Interrupt Link [APCH] (IRQs 20 21 22 23) *0
[    0.230698] ACPI: PCI Interrupt Link [APCJ] (IRQs 20 21 22 23) *0
[    0.230775] ACPI: PCI Interrupt Link [APCK] (IRQs 20 21 22 23) *0, disabled.
[    0.230853] ACPI: PCI Interrupt Link [APCS] (IRQs 20 21 22 23) *0, disabled.
[    0.230931] ACPI: PCI Interrupt Link [APCL] (IRQs 20 21 22 23) *0, disabled.
[    0.231009] ACPI: PCI Interrupt Link [APCZ] (IRQs 20 21 22 23) *0, disabled.
[    0.231094] ACPI: PCI Interrupt Link [APSI] (IRQs 20 21 22 23) *0
[    0.231178] ACPI: PCI Interrupt Link [APSJ] (IRQs 20 21 22 23) *0
[    0.231262] ACPI: PCI Interrupt Link [APCP] (IRQs 20 21 22 23) *0, disabled.
[    0.231406] vgaarb: device added: PCI:0000:03:00.0,decodes=io+mem,owns=io+mem,locks=none
[    0.231409] vgaarb: loaded
[    0.231632] SCSI subsystem initialized
[    0.231720] libata version 3.00 loaded.
[    0.231784] usbcore: registered new interface driver usbfs
[    0.231797] usbcore: registered new interface driver hub
[    0.231825] usbcore: registered new device driver usb
[    0.231956] wmi: Mapper loaded
[    0.231958] PCI: Using ACPI for IRQ routing
[    0.231963] PCI: pci_cache_line_size set to 64 bytes
[    0.231981] pci 0000:00:02.1: address space collision: [mem 0xfeb00000-0xfeb000ff] conflicts with PCI Bus #00 [mem 0xfeb00000-0xfec0ffff]
[    0.232043] Expanded resource reserved due to conflict with PCI Bus #00
[    0.232046] reserve RAM buffer: 000000000009f800 - 000000000009ffff 
[    0.232049] reserve RAM buffer: 00000000bfff0000 - 00000000bfffffff 
[    0.232167] NetLabel: Initializing
[    0.232170] NetLabel:  domain hash size = 128
[    0.232171] NetLabel:  protocols = UNLABELED CIPSOv4
[    0.232185] NetLabel:  unlabeled traffic allowed by default
[    0.240904] AppArmor: AppArmor Filesystem Enabled
[    0.240944] pnp: PnP ACPI init
[    0.240966] ACPI: bus type pnp registered
[    0.241105] pnp 00:00: [bus 00-ff]
[    0.241108] pnp 00:00: [io  0x0cf8-0x0cff]
[    0.241110] pnp 00:00: [io  0x0000-0x0cf7 window]
[    0.241113] pnp 00:00: [io  0x0d00-0xffff window]
[    0.241116] pnp 00:00: [mem 0x000a0000-0x000bffff window]
[    0.241118] pnp 00:00: [mem 0x000c0000-0x000dffff window]
[    0.241121] pnp 00:00: [mem 0xc0000000-0xfebfffff window]
[    0.241202] pnp 00:00: Plug and Play ACPI device, IDs PNP0a08 PNP0a03 (active)
[    0.241259] pnp 00:01: [io  0x4000-0x407f]
[    0.241261] pnp 00:01: [io  0x4080-0x40ff]
[    0.241264] pnp 00:01: [io  0x4400-0x447f]
[    0.241266] pnp 00:01: [io  0x4480-0x44ff]
[    0.241268] pnp 00:01: [io  0x4800-0x487f]
[    0.241271] pnp 00:01: [io  0x4880-0x48ff]
[    0.241273] pnp 00:01: [mem 0xa0000000-0x9fffffff disabled]
[    0.241348] system 00:01: [io  0x4000-0x407f] has been reserved
[    0.241351] system 00:01: [io  0x4080-0x40ff] has been reserved
[    0.241354] system 00:01: [io  0x4400-0x447f] has been reserved
[    0.241358] system 00:01: [io  0x4480-0x44ff] has been reserved
[    0.241361] system 00:01: [io  0x4800-0x487f] has been reserved
[    0.241364] system 00:01: [io  0x4880-0x48ff] has been reserved
[    0.241367] system 00:01: Plug and Play ACPI device, IDs PNP0c02 (active)
[    0.241928] pnp 00:02: [io  0x0010-0x001f]
[    0.241930] pnp 00:02: [io  0x0022-0x003f]
[    0.241933] pnp 00:02: [io  0x0044-0x005f]
[    0.241935] pnp 00:02: [io  0x0062-0x0063]
[    0.241937] pnp 00:02: [io  0x0065-0x006f]
[    0.241939] pnp 00:02: [io  0x0074-0x007f]
[    0.241942] pnp 00:02: [io  0x0091-0x0093]
[    0.241944] pnp 00:02: [io  0x00a2-0x00bf]
[    0.241946] pnp 00:02: [io  0x00e0-0x00ef]
[    0.241949] pnp 00:02: [io  0x04d0-0x04d1]
[    0.241951] pnp 00:02: [io  0x0800-0x087f]
[    0.241953] pnp 00:02: [io  0x0290-0x0297]
[    0.242025] system 00:02: [io  0x04d0-0x04d1] has been reserved
[    0.242028] system 00:02: [io  0x0800-0x087f] has been reserved
[    0.242031] system 00:02: [io  0x0290-0x0297] has been reserved
[    0.242035] system 00:02: Plug and Play ACPI device, IDs PNP0c02 (active)
[    0.242051] pnp 00:03: [dma 4]
[    0.242054] pnp 00:03: [io  0x0000-0x000f]
[    0.242056] pnp 00:03: [io  0x0080-0x0090]
[    0.242058] pnp 00:03: [io  0x0094-0x009f]
[    0.242061] pnp 00:03: [io  0x00c0-0x00df]
[    0.242103] pnp 00:03: Plug and Play ACPI device, IDs PNP0200 (active)
[    0.242115] pnp 00:04: [io  0x0070-0x0073]
[    0.242130] pnp 00:04: [irq 8]
[    0.242169] pnp 00:04: Plug and Play ACPI device, IDs PNP0b00 (active)
[    0.242179] pnp 00:05: [io  0x0061]
[    0.242221] pnp 00:05: Plug and Play ACPI device, IDs PNP0800 (active)
[    0.242232] pnp 00:06: [io  0x00f0-0x00ff]
[    0.242238] pnp 00:06: [irq 13]
[    0.242277] pnp 00:06: Plug and Play ACPI device, IDs PNP0c04 (active)
[    0.242606] pnp 00:07: [io  0x03f8-0x03ff]
[    0.242613] pnp 00:07: [irq 4]
[    0.242691] pnp 00:07: Plug and Play ACPI device, IDs PNP0501 (active)
[    0.243200] pnp 00:08: [io  0x0378-0x037f]
[    0.243202] pnp 00:08: [io  0x0778-0x077b]
[    0.243209] pnp 00:08: [irq 7]
[    0.243211] pnp 00:08: [dma 3]
[    0.243285] pnp 00:08: Plug and Play ACPI device, IDs PNP0401 (active)
[    0.243326] pnp 00:09: [io  0x0060]
[    0.243329] pnp 00:09: [io  0x0064]
[    0.243335] pnp 00:09: [irq 1]
[    0.243381] pnp 00:09: Plug and Play ACPI device, IDs PNP0303 PNP030b (active)
[    0.243622] pnp 00:0a: [io  0x0330-0x0331]
[    0.243628] pnp 00:0a: [irq 10]
[    0.243685] pnp 00:0a: Plug and Play ACPI device, IDs PNPb006 (active)
[    0.243893] pnp 00:0b: [io  0x0201]
[    0.243943] pnp 00:0b: Plug and Play ACPI device, IDs PNPb02f (active)
[    0.243968] pnp 00:0c: [mem 0xe0000000-0xefffffff]
[    0.244030] system 00:0c: [mem 0xe0000000-0xefffffff] has been reserved
[    0.244034] system 00:0c: Plug and Play ACPI device, IDs PNP0c02 (active)
[    0.244138] pnp 00:0d: [mem 0x000f0000-0x000f3fff]
[    0.244141] pnp 00:0d: [mem 0x000f4000-0x000f7fff]
[    0.244143] pnp 00:0d: [mem 0x000f8000-0x000fbfff]
[    0.244146] pnp 00:0d: [mem 0x000fc000-0x000fffff]
[    0.244148] pnp 00:0d: [mem 0xbfff0000-0xbfffffff]
[    0.244150] pnp 00:0d: [mem 0xffff0000-0xffffffff]
[    0.244153] pnp 00:0d: [mem 0x00000000-0x0009ffff]
[    0.244160] pnp 00:0d: [mem 0x00100000-0xbffeffff]
[    0.244162] pnp 00:0d: [mem 0xfec00000-0xfec00fff]
[    0.244165] pnp 00:0d: [mem 0xfee00000-0xfeefffff]
[    0.244167] pnp 00:0d: [mem 0xfefff000-0xfeffffff]
[    0.244170] pnp 00:0d: [mem 0xfff80000-0xfff80fff]
[    0.244172] pnp 00:0d: [mem 0xfff90000-0xfffbffff]
[    0.244175] pnp 00:0d: [mem 0xfffed000-0xfffeffff]
[    0.244248] system 00:0d: [mem 0x000f0000-0x000f3fff] could not be reserved
[    0.244252] system 00:0d: [mem 0x000f4000-0x000f7fff] could not be reserved
[    0.244255] system 00:0d: [mem 0x000f8000-0x000fbfff] could not be reserved
[    0.244258] system 00:0d: [mem 0x000fc000-0x000fffff] could not be reserved
[    0.244261] system 00:0d: [mem 0xbfff0000-0xbfffffff] could not be reserved
[    0.244265] system 00:0d: [mem 0xffff0000-0xffffffff] has been reserved
[    0.244268] system 00:0d: [mem 0x00000000-0x0009ffff] could not be reserved
[    0.244271] system 00:0d: [mem 0x00100000-0xbffeffff] could not be reserved
[    0.244275] system 00:0d: [mem 0xfec00000-0xfec00fff] could not be reserved
[    0.244278] system 00:0d: [mem 0xfee00000-0xfeefffff] has been reserved
[    0.244281] system 00:0d: [mem 0xfefff000-0xfeffffff] has been reserved
[    0.244284] system 00:0d: [mem 0xfff80000-0xfff80fff] has been reserved
[    0.244288] system 00:0d: [mem 0xfff90000-0xfffbffff] has been reserved
[    0.244291] system 00:0d: [mem 0xfffed000-0xfffeffff] has been reserved
[    0.244294] system 00:0d: Plug and Play ACPI device, IDs PNP0c01 (active)
[    0.244306] pnp: PnP ACPI: found 14 devices
[    0.244307] ACPI: ACPI bus type pnp unregistered
[    0.250799] Switching to clocksource acpi_pm
[    0.250871] pci 0000:00:09.0: BAR 15: assigned [mem 0xd4100000-0xd41fffff pref]
[    0.250875] pci 0000:00:02.1: BAR 0: assigned [mem 0xd4005000-0xd40050ff]
[    0.250880] pci 0000:00:02.1: BAR 0: set to [mem 0xd4005000-0xd40050ff] (PCI address [0xd4005000-0xd40050ff])
[    0.250885] pci 0000:05:0a.0: BAR 6: assigned [mem 0xd4100000-0xd417ffff pref]
[    0.250888] pci 0000:00:09.0: PCI bridge to [bus 05-05]
[    0.250891] pci 0000:00:09.0:   bridge window [io  0x8000-0x9fff]
[    0.250895] pci 0000:00:09.0:   bridge window [mem 0xd2000000-0xd3ffffff]
[    0.250898] pci 0000:00:09.0:   bridge window [mem 0xd4100000-0xd41fffff pref]
[    0.250902] pci 0000:00:0b.0: PCI bridge to [bus 04-04]
[    0.250904] pci 0000:00:0b.0:   bridge window [io  disabled]
[    0.250907] pci 0000:00:0b.0:   bridge window [mem disabled]
[    0.250910] pci 0000:00:0b.0:   bridge window [mem pref disabled]
[    0.250917] pci 0000:03:00.0: BAR 6: assigned [mem 0xd0000000-0xd001ffff pref]
[    0.250920] pci 0000:00:0c.0: PCI bridge to [bus 03-03]
[    0.250922] pci 0000:00:0c.0:   bridge window [io  0xa000-0xafff]
[    0.250926] pci 0000:00:0c.0:   bridge window [mem 0xd0000000-0xd1ffffff]
[    0.250929] pci 0000:00:0c.0:   bridge window [mem 0xc0000000-0xcfffffff 64bit pref]
[    0.250933] pci 0000:00:0d.0: PCI bridge to [bus 02-02]
[    0.250936] pci 0000:00:0d.0:   bridge window [io  disabled]
[    0.250939] pci 0000:00:0d.0:   bridge window [mem disabled]
[    0.250941] pci 0000:00:0d.0:   bridge window [mem pref disabled]
[    0.250945] pci 0000:00:0e.0: PCI bridge to [bus 01-01]
[    0.250947] pci 0000:00:0e.0:   bridge window [io  disabled]
[    0.250950] pci 0000:00:0e.0:   bridge window [mem disabled]
[    0.250953] pci 0000:00:0e.0:   bridge window [mem pref disabled]
[    0.250963] pci 0000:00:09.0: setting latency timer to 64
[    0.250968] pci 0000:00:0b.0: setting latency timer to 64
[    0.250973] pci 0000:00:0c.0: setting latency timer to 64
[    0.250978] pci 0000:00:0d.0: setting latency timer to 64
[    0.250984] pci 0000:00:0e.0: setting latency timer to 64
[    0.250988] pci_bus 0000:00: resource 4 [io  0x0000-0xffff]
[    0.250991] pci_bus 0000:00: resource 5 [mem 0xc0000000-0xfcffffffff]
[    0.250994] pci_bus 0000:00: resource 6 [mem 0xfeb00000-0xfec0ffff]
[    0.250997] pci_bus 0000:00: resource 7 [mem 0x000a0000-0x000bffff]
[    0.251000] pci_bus 0000:05: resource 0 [io  0x8000-0x9fff]
[    0.251002] pci_bus 0000:05: resource 1 [mem 0xd2000000-0xd3ffffff]
[    0.251005] pci_bus 0000:05: resource 2 [mem 0xd4100000-0xd41fffff pref]
[    0.251008] pci_bus 0000:05: resource 4 [io  0x0000-0xffff]
[    0.251011] pci_bus 0000:05: resource 5 [mem 0xc0000000-0xfcffffffff]
[    0.251014] pci_bus 0000:05: resource 6 [mem 0xfeb00000-0xfec0ffff]
[    0.251017] pci_bus 0000:05: resource 7 [mem 0x000a0000-0x000bffff]
[    0.251020] pci_bus 0000:03: resource 0 [io  0xa000-0xafff]
[    0.251022] pci_bus 0000:03: resource 1 [mem 0xd0000000-0xd1ffffff]
[    0.251025] pci_bus 0000:03: resource 2 [mem 0xc0000000-0xcfffffff 64bit pref]
[    0.251078] NET: Registered protocol family 2
[    0.251269] IP route cache hash table entries: 131072 (order: 8, 1048576 bytes)
[    0.253495] TCP established hash table entries: 524288 (order: 11, 8388608 bytes)
[    0.259214] Switched to NOHz mode on CPU #0
[    0.260341] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
[    0.261223] TCP: Hash tables configured (established 524288 bind 65536)
[    0.261227] TCP reno registered
[    0.261245] UDP hash table entries: 2048 (order: 4, 65536 bytes)
[    0.261316] UDP-Lite hash table entries: 2048 (order: 4, 65536 bytes)
[    0.261487] NET: Registered protocol family 1
[    0.280092] pci 0000:00:00.0: Found enabled HT MSI Mapping
[    0.280098] pci 0000:00:0b.0: Found disabled HT MSI Mapping
[    0.280106] pci 0000:00:00.0: Found enabled HT MSI Mapping
[    0.280110] pci 0000:00:0b.0: Linking AER extended capability
[    0.280147] pci 0000:00:00.0: Found enabled HT MSI Mapping
[    0.280153] pci 0000:00:0c.0: Found disabled HT MSI Mapping
[    0.280160] pci 0000:00:00.0: Found enabled HT MSI Mapping
[    0.280163] pci 0000:00:0c.0: Linking AER extended capability
[    0.280203] pci 0000:00:00.0: Found enabled HT MSI Mapping
[    0.280209] pci 0000:00:0d.0: Found disabled HT MSI Mapping
[    0.280216] pci 0000:00:00.0: Found enabled HT MSI Mapping
[    0.280219] pci 0000:00:0d.0: Linking AER extended capability
[    0.280262] pci 0000:00:00.0: Found enabled HT MSI Mapping
[    0.280268] pci 0000:00:0e.0: Found disabled HT MSI Mapping
[    0.280275] pci 0000:00:00.0: Found enabled HT MSI Mapping
[    0.280278] pci 0000:00:0e.0: Linking AER extended capability
[    0.280296] pci 0000:03:00.0: Boot video device
[    0.280302] PCI: CLS 32 bytes, default 64
[    0.280488] Trying to unpack rootfs image as initramfs...
[    0.330758] audit: initializing netlink socket (disabled)
[    0.330773] type=2000 audit(1312566330.329:1): initialized
[    0.370178] HugeTLB registered 2 MB page size, pre-allocated 0 pages
[    0.372382] VFS: Disk quotas dquot_6.5.2
[    0.372450] Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[    0.373214] fuse init (API version 7.16)
[    0.373315] msgmni has been set to 6001
[    0.380302] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253)
[    0.390229] io scheduler noop registered
[    0.390234] io scheduler deadline registered (default)
[    0.390340] io scheduler cfq registered
[    0.390551] pcieport 0000:00:0b.0: setting latency timer to 64
[    0.390579] pcieport 0000:00:0b.0: irq 40 for MSI/MSI-X
[    0.390666] pcieport 0000:00:0c.0: setting latency timer to 64
[    0.390688] pcieport 0000:00:0c.0: irq 41 for MSI/MSI-X
[    0.390755] pcieport 0000:00:0d.0: setting latency timer to 64
[    0.390773] pcieport 0000:00:0d.0: irq 42 for MSI/MSI-X
[    0.390842] pcieport 0000:00:0e.0: setting latency timer to 64
[    0.390860] pcieport 0000:00:0e.0: irq 43 for MSI/MSI-X
[    0.390939] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[    0.390965] pciehp: PCI Express Hot Plug Controller Driver version: 0.4
[    0.391127] input: Power Button as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input0
[    0.391134] ACPI: Power Button [PWRB]
[    0.391200] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input1
[    0.391206] ACPI: Power Button [PWRF]
[    0.391269] ACPI: Fan [FAN] (on)
[    0.391603] ACPI: acpi_idle registered with cpuidle
[    0.394356] thermal LNXTHERM:00: registered as thermal_zone0
[    0.394359] ACPI: Thermal Zone [THRM] (40 C)
[    0.394401] ERST: Table is not found!
[    0.394521] Serial: 8250/16550 driver, 32 ports, IRQ sharing enabled
[    0.415021] serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[    0.436504] 00:07: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[    0.436755] Linux agpgart interface v0.103
[    0.438064] brd: module loaded
[    0.438669] loop: module loaded
[    0.438813] i2c-core: driver [adp5520] using legacy suspend method
[    0.438816] i2c-core: driver [adp5520] using legacy resume method
[    0.450208] pata_acpi 0000:00:06.0: setting latency timer to 64
[    0.450547] ACPI: PCI Interrupt Link [APSI] enabled at IRQ 23
[    0.450567] pata_acpi 0000:00:07.0: PCI INT A -> Link[APSI] -> GSI 23 (level, low) -> IRQ 23
[    0.450594] pata_acpi 0000:00:07.0: setting latency timer to 64
[    0.450602] pata_acpi 0000:00:07.0: PCI INT A disabled
[    0.450804] ACPI: PCI Interrupt Link [APSJ] enabled at IRQ 22
[    0.450813] pata_acpi 0000:00:08.0: PCI INT A -> Link[APSJ] -> GSI 22 (level, low) -> IRQ 22
[    0.450840] pata_acpi 0000:00:08.0: setting latency timer to 64
[    0.450847] pata_acpi 0000:00:08.0: PCI INT A disabled
[    0.451345] Fixed MDIO Bus: probed
[    0.451386] PPP generic driver version 2.4.2
[    0.451465] tun: Universal TUN/TAP device driver, 1.6
[    0.451467] tun: (C) 1999-2004 Max Krasnyansky <[email protected]>
[    0.451584] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[    0.451766] ACPI: PCI Interrupt Link [APCL] enabled at IRQ 21
[    0.451779] ehci_hcd 0000:00:02.1: PCI INT B -> Link[APCL] -> GSI 21 (level, low) -> IRQ 21
[    0.451800] ehci_hcd 0000:00:02.1: setting latency timer to 64
[    0.451804] ehci_hcd 0000:00:02.1: EHCI Host Controller
[    0.451857] ehci_hcd 0000:00:02.1: new USB bus registered, assigned bus number 1
[    0.451903] ehci_hcd 0000:00:02.1: debug port 1
[    0.451909] ehci_hcd 0000:00:02.1: cache line size of 32 is not supported
[    0.451931] ehci_hcd 0000:00:02.1: irq 21, io mem 0xd4005000
[    0.470200] ehci_hcd 0000:00:02.1: USB 2.0 started, EHCI 1.00
[    0.470407] hub 1-0:1.0: USB hub found
[    0.470413] hub 1-0:1.0: 10 ports detected
[    0.470556] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[    0.480331] ACPI: PCI Interrupt Link [APCF] enabled at IRQ 20
[    0.480354] ohci_hcd 0000:00:02.0: PCI INT A -> Link[APCF] -> GSI 20 (level, low) -> IRQ 20
[    0.480379] ohci_hcd 0000:00:02.0: setting latency timer to 64
[    0.480383] ohci_hcd 0000:00:02.0: OHCI Host Controller
[    0.480490] ohci_hcd 0000:00:02.0: new USB bus registered, assigned bus number 2
[    0.480530] ohci_hcd 0000:00:02.0: irq 20, io mem 0xd4004000
[    0.542446] hub 2-0:1.0: USB hub found
[    0.542453] hub 2-0:1.0: 10 ports detected
[    0.542586] uhci_hcd: USB Universal Host Controller Interface driver
[    0.542745] i8042: PNP: PS/2 Controller [PNP0303:PS2K] at 0x60,0x64 irq 1
[    0.542748] i8042: PNP: PS/2 appears to have AUX port disabled, if this is incorrect please boot with i8042.nopnp
[    0.543564] serio: i8042 KBD port at 0x60,0x64 irq 1
[    0.543668] mousedev: PS/2 mouse device common for all mice
[    0.543792] rtc_cmos 00:04: RTC can wake from S4
[    0.543853] rtc_cmos 00:04: rtc core: registered rtc_cmos as rtc0
[    0.543877] rtc0: alarms up to one year, y3k, 242 bytes nvram
[    0.543985] device-mapper: uevent: version 1.0.3
[    0.544070] device-mapper: ioctl: 4.19.1-ioctl (2011-01-07) initialised: [email protected]
[    0.548438] device-mapper: multipath: version 1.2.0 loaded
[    0.548443] device-mapper: multipath round-robin: version 1.0.0 loaded
[    0.553539] cpuidle: using governor ladder
[    0.553544] cpuidle: using governor menu
[    0.553891] TCP cubic registered
[    0.554050] NET: Registered protocol family 10
[    0.554686] NET: Registered protocol family 17
[    0.554710] Registering the dns_resolver key type
[    0.554734] powernow-k8: Found 1 AMD Athlon(tm) 64 Processor 3200+ (1 cpu cores) (version 2.20.00)
[    0.554777] powernow-k8:    0 : fid 0xc (2000 MHz), vid 0x6
[    0.554779] powernow-k8:    1 : fid 0xa (1800 MHz), vid 0x8
[    0.554782] powernow-k8:    2 : fid 0x2 (1000 MHz), vid 0x12
[    0.554961] PM: Hibernation image not present or could not be loaded.
[    0.554975] registered taskstats version 1
[    0.555232]   Magic number: 7:426:794
[    0.555354] rtc_cmos 00:04: setting system clock to 2011-08-05 17:45:30 UTC (1312566330)
[    0.555358] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found
[    0.555360] EDD information not available.
[    0.567745] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input2
[    0.749572] Freeing initrd memory: 15800k freed
[    0.762209] Freeing unused kernel memory: 880k freed
[    0.762839] Write protecting the kernel read-only data: 10240k
[    0.763386] Freeing unused kernel memory: 100k freed
[    0.769177] Freeing unused kernel memory: 1416k freed
[    0.797913] <30>udev[96]: starting version 167
[    0.963996] pata_amd 0000:00:06.0: version 0.4.1
[    0.964051] pata_amd 0000:00:06.0: setting latency timer to 64
[    0.966523] scsi0 : pata_amd
[    0.968315] scsi1 : pata_amd
[    0.968838] ata1: PATA max UDMA/133 cmd 0x1f0 ctl 0x3f6 bmdma 0xf000 irq 14
[    0.968841] ata2: PATA max UDMA/133 cmd 0x170 ctl 0x376 bmdma 0xf008 irq 15
[    0.996777] [drm] Initialized drm 1.1.0 20060810
[    1.017357] sata_nv 0000:00:07.0: version 3.5
[    1.017376] sata_nv 0000:00:07.0: PCI INT A -> Link[APSI] -> GSI 23 (level, low) -> IRQ 23
[    1.017427] sata_nv 0000:00:07.0: setting latency timer to 64
[    1.020236] scsi2 : sata_nv
[    1.021667] scsi3 : sata_nv
[    1.021845] ata3: SATA max UDMA/133 cmd 0x9f0 ctl 0xbf0 bmdma 0xd800 irq 23
[    1.021849] ata4: SATA max UDMA/133 cmd 0x970 ctl 0xb70 bmdma 0xd808 irq 23
[    1.024591] sata_nv 0000:00:08.0: PCI INT A -> Link[APSJ] -> GSI 22 (level, low) -> IRQ 22
[    1.024643] sata_nv 0000:00:08.0: setting latency timer to 64
[    1.027407] scsi4 : sata_nv
[    1.028796] scsi5 : sata_nv
[    1.028982] ata5: SATA max UDMA/133 cmd 0x9e0 ctl 0xbe0 bmdma 0xc400 irq 22
[    1.028986] ata6: SATA max UDMA/133 cmd 0x960 ctl 0xb60 bmdma 0xc408 irq 22
[    1.031431] forcedeth: Reverse Engineered nForce ethernet driver. Version 0.64.
[    1.031632] ACPI: PCI Interrupt Link [APCH] enabled at IRQ 23
[    1.031640] forcedeth 0000:00:0a.0: PCI INT A -> Link[APCH] -> GSI 23 (level, low) -> IRQ 23
[    1.031645] forcedeth 0000:00:0a.0: setting latency timer to 64
[    1.046334] sata_sil 0000:05:0a.0: version 2.4
[    1.046520] ACPI: PCI Interrupt Link [APC4] enabled at IRQ 19
[    1.046540] sata_sil 0000:05:0a.0: PCI INT A -> Link[APC4] -> GSI 19 (level, low) -> IRQ 19
[    1.046569] sata_sil 0000:05:0a.0: Applying R_ERR on DMA activate FIS errata fix
[    1.050257] scsi6 : sata_sil
[    1.050979] scsi7 : sata_sil
[    1.052526] scsi8 : sata_sil
[    1.054163] scsi9 : sata_sil
[    1.054243] ata7: SATA max UDMA/100 mmio m1024@0xd3005000 tf 0xd3005080 irq 19
[    1.054247] ata8: SATA max UDMA/100 mmio m1024@0xd3005000 tf 0xd30050c0 irq 19
[    1.054250] ata9: SATA max UDMA/100 mmio m1024@0xd3005000 tf 0xd3005280 irq 19
[    1.054254] ata10: SATA max UDMA/100 mmio m1024@0xd3005000 tf 0xd30052c0 irq 19
[    1.075138] ACPI: PCI Interrupt Link [APC1] enabled at IRQ 16
[    1.075161] firewire_ohci 0000:05:0b.0: PCI INT A -> Link[APC1] -> GSI 16 (level, low) -> IRQ 16
[    1.130932] usb 2-2: new full speed USB device using ohci_hcd and address 2
[    1.131015] firewire_ohci: Added fw-ohci device 0000:05:0b.0, OHCI v1.10, 4 IR + 8 IT contexts, quirks 0x2
[    1.383617] input: Razer Razer Arctosa as /devices/pci0000:00/0000:00:02.0/usb2/2-2/2-2:1.0/input/input3
[    1.383721] generic-usb 0003:1532:010B.0001: input,hidraw0: USB HID v1.10 Keyboard [Razer Razer Arctosa] on usb-0000:00:02.0-2/input0
[    1.394352] input: Razer Razer Arctosa as /devices/pci0000:00/0000:00:02.0/usb2/2-2/2-2:1.1/input/input4
[    1.394435] generic-usb 0003:1532:010B.0002: input,hidraw1: USB HID v1.10 Device [Razer Razer Arctosa] on usb-0000:00:02.0-2/input1
[    1.394454] usbcore: registered new interface driver usbhid
[    1.394456] usbhid: USB HID core driver
[    1.400041] ata7: SATA link down (SStatus 0 SControl 310)
[    1.510029] ata3: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[    1.520024] ata5: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[    1.530543] ata3.00: ATA-8: WDC WD20EARS-00MVWB0, 51.0AB51, max UDMA/133
[    1.530546] ata3.00: 3907029168 sectors, multi 1: LBA48 NCQ (depth 0/32)
[    1.540381] ata5.00: ATA-8: WDC WD5000AADS-00S9B0, 01.00A01, max UDMA/133
[    1.540384] ata5.00: 976773168 sectors, multi 1: LBA48 NCQ (depth 0/32)
[    1.550559] ata3.00: configured for UDMA/133
[    1.550670] scsi 2:0:0:0: Direct-Access     ATA      WDC WD20EARS-00M 51.0 PQ: 0 ANSI: 5
[    1.550875] sd 2:0:0:0: Attached scsi generic sg0 type 0
[    1.551196] sd 2:0:0:0: [sda] 3907029168 512-byte logical blocks: (2.00 TB/1.81 TiB)
[    1.551250] sd 2:0:0:0: [sda] Write Protect is off
[    1.551254] sd 2:0:0:0: [sda] Mode Sense: 00 3a 00 00
[    1.551277] sd 2:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[    1.560703] forcedeth 0000:00:0a.0: ifname eth0, PHY OUI 0x5043 @ 9, addr 00:11:d8:ab:c1:89
[    1.560707] forcedeth 0000:00:0a.0: highdma csum gbit lnktim desc-v3
[    1.580455] ata5.00: configured for UDMA/133
[    1.630123] firewire_core: created device fw0: GUID 0011d800001bf904, S400
[    1.960761]  sda: sda1
[    1.961060] sd 2:0:0:0: [sda] Attached SCSI disk
[    2.040036] ata4: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[    2.060708] ata4.00: ATA-8: WDC WD20EARS-00S8B1, 80.00A80, max UDMA/133
[    2.060712] ata4.00: 3907029168 sectors, multi 1: LBA48 NCQ (depth 0/32)
[    2.080729] ata4.00: configured for UDMA/133
[    2.080812] scsi 3:0:0:0: Direct-Access     ATA      WDC WD20EARS-00S 80.0 PQ: 0 ANSI: 5
[    2.080995] sd 3:0:0:0: Attached scsi generic sg1 type 0
[    2.081120] scsi 4:0:0:0: Direct-Access     ATA      WDC WD5000AADS-0 01.0 PQ: 0 ANSI: 5
[    2.081248] sd 4:0:0:0: Attached scsi generic sg2 type 0
[    2.081347] sd 4:0:0:0: [sdc] 976773168 512-byte logical blocks: (500 GB/465 GiB)
[    2.081399] sd 4:0:0:0: [sdc] Write Protect is off
[    2.081403] sd 4:0:0:0: [sdc] Mode Sense: 00 3a 00 00
[    2.081425] sd 4:0:0:0: [sdc] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[    2.081538] sd 3:0:0:0: [sdb] 3907029168 512-byte logical blocks: (2.00 TB/1.81 TiB)
[    2.081587] sd 3:0:0:0: [sdb] Write Protect is off
[    2.081590] sd 3:0:0:0: [sdb] Mode Sense: 00 3a 00 00
[    2.081612] sd 3:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[    2.119866]  sdc: sdc1 sdc2 < sdc5 >
[    2.120197] sd 4:0:0:0: [sdc] Attached SCSI disk
[    2.496123]  sdb: sdb1
[    2.496384] sd 3:0:0:0: [sdb] Attached SCSI disk
[    2.570034] ata6: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[    2.590258] ata6.00: ATA-8: WDC WD20EARS-00MVWB0, 51.0AB51, max UDMA/133
[    2.590262] ata6.00: 3907029168 sectors, multi 1: LBA48 NCQ (depth 0/32)
[    2.610276] ata6.00: configured for UDMA/133
[    2.610364] scsi 5:0:0:0: Direct-Access     ATA      WDC WD20EARS-00M 51.0 PQ: 0 ANSI: 5
[    2.610549] sd 5:0:0:0: Attached scsi generic sg3 type 0
[    2.610665] sd 5:0:0:0: [sdd] 3907029168 512-byte logical blocks: (2.00 TB/1.81 TiB)
[    2.610715] sd 5:0:0:0: [sdd] Write Protect is off
[    2.610719] sd 5:0:0:0: [sdd] Mode Sense: 00 3a 00 00
[    2.610741] sd 5:0:0:0: [sdd] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[    2.960030] ata8: SATA link down (SStatus 0 SControl 310)
[    3.005154]  sdd: sdd1
[    3.005412] sd 5:0:0:0: [sdd] Attached SCSI disk
[    3.310032] ata9: SATA link down (SStatus 0 SControl 310)
[    3.546409] xor: automatically using best checksumming function: generic_sse
[    3.590012]    generic_sse:  6596.000 MB/sec
[    3.590014] xor: using function: generic_sse (6596.000 MB/sec)
[    3.650031] ata10: SATA link down (SStatus 0 SControl 310)
[    3.676172] device-mapper: dm-raid45: initialized v0.2594b
[    3.732980] [drm] radeon defaulting to kernel modesetting.
[    3.732984] [drm] radeon kernel modesetting enabled.
[    3.738659] radeon 0000:03:00.0: PCI INT A -> Link[APC1] -> GSI 16 (level, low) -> IRQ 16
[    3.738668] radeon 0000:03:00.0: setting latency timer to 64
[    3.742095] [drm] initializing kernel modesetting (RV710 0x1002:0x954F).
[    3.742129] [drm] register mmio base: 0xD1000000
[    3.742131] [drm] register mmio size: 65536
[    3.742646] ATOM BIOS: 
[    3.742691] radeon 0000:03:00.0: VRAM: 512M 0x0000000000000000 - 0x000000001FFFFFFF (512M used)
[    3.742694] radeon 0000:03:00.0: GTT: 512M 0x0000000020000000 - 0x000000003FFFFFFF
[    3.742880] [drm] Detected VRAM RAM=512M, BAR=256M
[    3.742885] [drm] RAM width 64bits DDR
[    3.743669] [TTM] Zone  kernel: Available graphics memory: 1545368 kiB.
[    3.743672] [TTM] Initializing pool allocator.
[    3.743710] [drm] radeon: 512M of VRAM memory ready
[    3.743713] [drm] radeon: 512M of GTT memory ready.
[    3.743737] [drm] Supports vblank timestamp caching Rev 1 (10.10.2010).
[    3.743739] [drm] Driver supports precise vblank timestamp query.
[    3.743787] radeon 0000:03:00.0: irq 44 for MSI/MSI-X
[    3.743793] radeon 0000:03:00.0: radeon: using MSI.
[    3.743834] [drm] radeon: irq initialized.
[    3.743837] [drm] GART: num cpu pages 131072, num gpu pages 131072
[    3.745806] [drm] Loading RV710 Microcode
[    3.762837] radeon 0000:03:00.0: WB enabled
[    3.809453] [drm] ring test succeeded in 1 usecs
[    3.809584] [drm] radeon: ib pool ready.
[    3.809675] [drm] ib test succeeded in 0 usecs
[    3.809677] [drm] Enabling audio support
[    3.809686] failed to evaluate ATIF got AE_BAD_PARAMETER
[    3.809992] [drm] Radeon Display Connectors
[    3.810014] [drm] Connector 0:
[    3.810015] [drm]   VGA
[    3.810018] [drm]   DDC: 0x7e40 0x7e40 0x7e44 0x7e44 0x7e48 0x7e48 0x7e4c 0x7e4c
[    3.810020] [drm]   Encoders:
[    3.810022] [drm]     CRT2: INTERNAL_KLDSCP_DAC2
[    3.810024] [drm] Connector 1:
[    3.810025] [drm]   HDMI-A
[    3.810026] [drm]   HPD1
[    3.810029] [drm]   DDC: 0x7e50 0x7e50 0x7e54 0x7e54 0x7e58 0x7e58 0x7e5c 0x7e5c
[    3.810031] [drm]   Encoders:
[    3.810032] [drm]     DFP1: INTERNAL_UNIPHY
[    3.810034] [drm] Connector 2:
[    3.810035] [drm]   DVI-I
[    3.810037] [drm]   HPD4
[    3.810039] [drm]   DDC: 0x7f10 0x7f10 0x7f14 0x7f14 0x7f18 0x7f18 0x7f1c 0x7f1c
[    3.810041] [drm]   Encoders:
[    3.810042] [drm]     CRT1: INTERNAL_KLDSCP_DAC1
[    3.810044] [drm]     DFP2: INTERNAL_UNIPHY2
[    3.944136] [drm] Internal thermal controller without fan control
[    3.944221] [drm] radeon: power management initialized
[    4.058965] [drm] fb mappable at 0xC0142000
[    4.058969] [drm] vram apper at 0xC0000000
[    4.058971] [drm] size 5324800
[    4.058973] [drm] fb depth is 24
[    4.058974] [drm]    pitch is 5888
[    4.059071] fbcon: radeondrmfb (fb0) is primary device
[    4.470097] Console: switching to colour frame buffer device 180x56
[    4.497650] fb0: radeondrmfb frame buffer device
[    4.497652] drm: registered panic notifier
[    4.497661] [drm] Initialized radeon 2.8.0 20080528 for 0000:03:00.0 on minor 0
[    4.779439] md: linear personality registered for level -1
[    4.782723] md: multipath personality registered for level -4
[    4.785637] md: raid0 personality registered for level 0
[    4.790308] md: raid1 personality registered for level 1
[    4.793158] async_tx: api initialized (async)
[    4.960032] raid6: int64x1   1683 MB/s
[    5.130033] raid6: int64x2   2312 MB/s
[    5.300040] raid6: int64x4   1478 MB/s
[    5.470040] raid6: int64x8   1484 MB/s
[    5.640028] raid6: sse2x1    2376 MB/s
[    5.810025] raid6: sse2x2    3307 MB/s
[    5.980019] raid6: sse2x4    3526 MB/s
[    5.980020] raid6: using algorithm sse2x4 (3526 MB/s)
[    5.988631] md: raid6 personality registered for level 6
[    5.988636] md: raid5 personality registered for level 5
[    5.988638] md: raid4 personality registered for level 4
[    5.996803] md: raid10 personality registered for level 10
[   11.318856] EXT4-fs (sdc1): mounted filesystem with ordered data mode. Opts: (null)
[   15.480765] <30>udev[499]: starting version 167
[   17.006006] parport_pc 00:08: reported by Plug and Play ACPI
[   17.006064] parport0: PC-style at 0x378 (0x778), irq 7, dma 3 [PCSPP,TRISTATE,COMPAT,ECP,DMA]
[   17.059232] lp: driver loaded but no devices found
[   17.075660] ppdev: user-space parallel port driver
[   17.083539] lp0: using parport0 (interrupt-driven).
[   17.165390] MCE: In-kernel MCE decoding enabled.
[   17.189085] gameport gameport0: NS558 PnP Gameport is pnp00:0b/gameport0, io 0x201, speed 903kHz
[   17.229533] EDAC MC: Ver: 2.1.0 Jun 28 2011
[   17.285448] EDAC amd64_edac: v3.3.0
[   17.286464] EDAC amd64: DRAM ECC disabled.
[   17.286472] EDAC amd64: ECC disabled in the BIOS or no ECC capability, module will not load.
[   17.286474]  Either enable ECC checking or force module loading by setting 'ecc_enable_override'.
[   17.286475]  (Note that use of the override may cause unknown side effects.)
[   17.344738] i2c i2c-7: nForce2 SMBus adapter at 0x4c00
[   17.344771] i2c i2c-8: nForce2 SMBus adapter at 0x4c40
[   17.758184] ACPI: PCI Interrupt Link [APC2] enabled at IRQ 17
[   17.758207] HDA Intel 0000:03:00.1: PCI INT B -> Link[APC2] -> GSI 17 (level, low) -> IRQ 17
[   17.758268] HDA Intel 0000:03:00.1: irq 45 for MSI/MSI-X
[   17.758297] HDA Intel 0000:03:00.1: setting latency timer to 64
[   17.776345] ACPI: PCI Interrupt Link [APCJ] enabled at IRQ 22
[   17.776353] Intel ICH 0000:00:04.0: PCI INT A -> Link[APCJ] -> GSI 22 (level, low) -> IRQ 22
[   17.776388] Intel ICH 0000:00:04.0: setting latency timer to 64
[   18.110031] intel8x0_measure_ac97_clock: measured 50689 usecs (2496 samples)
[   18.110035] intel8x0: clocking to 46790
[   18.918071] type=1400 audit(1312566348.850:2): apparmor="STATUS" operation="profile_load" name="/sbin/dhclient" pid=679 comm="apparmor_parser"
[   18.918481] type=1400 audit(1312566348.850:3): apparmor="STATUS" operation="profile_load" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=679 comm="apparmor_parser"
[   18.918744] type=1400 audit(1312566348.850:4): apparmor="STATUS" operation="profile_load" name="/usr/lib/connman/scripts/dhclient-script" pid=679 comm="apparmor_parser"
[   18.919380] type=1400 audit(1312566348.850:5): apparmor="STATUS" operation="profile_replace" name="/sbin/dhclient" pid=681 comm="apparmor_parser"
[   18.919797] type=1400 audit(1312566348.850:6): apparmor="STATUS" operation="profile_replace" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=681 comm="apparmor_parser"
[   18.920095] type=1400 audit(1312566348.860:7): apparmor="STATUS" operation="profile_replace" name="/usr/lib/connman/scripts/dhclient-script" pid=681 comm="apparmor_parser"
[   31.570014] eth0: no IPv6 routers present
[   46.068713] EXT4-fs (sdc1): re-mounted. Opts: errors=remount-ro
[   47.031259] type=1400 audit(1312566360.924:8): apparmor="STATUS" operation="profile_replace" name="/sbin/dhclient" pid=1002 comm="apparmor_parser"
[   47.031696] type=1400 audit(1312566360.924:9): apparmor="STATUS" operation="profile_replace" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=1002 comm="apparmor_parser"
[   47.031970] type=1400 audit(1312566360.924:10): apparmor="STATUS" operation="profile_replace" name="/usr/lib/connman/scripts/dhclient-script" pid=1002 comm="apparmor_parser"
[   47.300226] type=1400 audit(1312566361.194:11): apparmor="STATUS" operation="profile_load" name="/usr/sbin/tcpdump" pid=1003 comm="apparmor_parser"
[   82.617487] Intel AES-NI instructions are not detected.
[   82.637782] padlock_aes: VIA PadLock not detected.

 

 

Her er det som trolig er mest interessant:

 

[    1.394456] usbhid: USB HID core driver
[    1.400041] ata7: SATA link down (SStatus 0 SControl 310)
[    1.510029] ata3: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[    1.520024] ata5: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[    1.530543] ata3.00: ATA-8: WDC WD20EARS-00MVWB0, 51.0AB51, max UDMA/133
[    1.530546] ata3.00: 3907029168 sectors, multi 1: LBA48 NCQ (depth 0/32)
[    1.540381] ata5.00: ATA-8: WDC WD5000AADS-00S9B0, 01.00A01, max UDMA/133
[    1.540384] ata5.00: 976773168 sectors, multi 1: LBA48 NCQ (depth 0/32)
[    1.550559] ata3.00: configured for UDMA/133
[    1.550670] scsi 2:0:0:0: Direct-Access     ATA      WDC WD20EARS-00M 51.0 PQ: 0 ANSI: 5
[    1.550875] sd 2:0:0:0: Attached scsi generic sg0 type 0
[    1.551196] sd 2:0:0:0: [sda] 3907029168 512-byte logical blocks: (2.00 TB/1.81 TiB)
[    1.551250] sd 2:0:0:0: [sda] Write Protect is off
[    1.551254] sd 2:0:0:0: [sda] Mode Sense: 00 3a 00 00
[    1.551277] sd 2:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[    1.560703] forcedeth 0000:00:0a.0: ifname eth0, PHY OUI 0x5043 @ 9, addr 00:11:d8:ab:c1:89
[    1.560707] forcedeth 0000:00:0a.0: highdma csum gbit lnktim desc-v3
[    1.580455] ata5.00: configured for UDMA/133
[    1.630123] firewire_core: created device fw0: GUID 0011d800001bf904, S400
[    1.960761]  sda: sda1
[    1.961060] sd 2:0:0:0: [sda] Attached SCSI disk
[    2.040036] ata4: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[    2.060708] ata4.00: ATA-8: WDC WD20EARS-00S8B1, 80.00A80, max UDMA/133
[    2.060712] ata4.00: 3907029168 sectors, multi 1: LBA48 NCQ (depth 0/32)
[    2.080729] ata4.00: configured for UDMA/133
[    2.080812] scsi 3:0:0:0: Direct-Access     ATA      WDC WD20EARS-00S 80.0 PQ: 0 ANSI: 5
[    2.080995] sd 3:0:0:0: Attached scsi generic sg1 type 0
[    2.081120] scsi 4:0:0:0: Direct-Access     ATA      WDC WD5000AADS-0 01.0 PQ: 0 ANSI: 5
[    2.081248] sd 4:0:0:0: Attached scsi generic sg2 type 0
[    2.081347] sd 4:0:0:0: [sdc] 976773168 512-byte logical blocks: (500 GB/465 GiB)
[    2.081399] sd 4:0:0:0: [sdc] Write Protect is off
[    2.081403] sd 4:0:0:0: [sdc] Mode Sense: 00 3a 00 00
[    2.081425] sd 4:0:0:0: [sdc] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[    2.081538] sd 3:0:0:0: [sdb] 3907029168 512-byte logical blocks: (2.00 TB/1.81 TiB)
[    2.081587] sd 3:0:0:0: [sdb] Write Protect is off
[    2.081590] sd 3:0:0:0: [sdb] Mode Sense: 00 3a 00 00
[    2.081612] sd 3:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[    2.119866]  sdc: sdc1 sdc2 < sdc5 >
[    2.120197] sd 4:0:0:0: [sdc] Attached SCSI disk
[    2.496123]  sdb: sdb1
[    2.496384] sd 3:0:0:0: [sdb] Attached SCSI disk
[    2.570034] ata6: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[    2.590258] ata6.00: ATA-8: WDC WD20EARS-00MVWB0, 51.0AB51, max UDMA/133
[    2.590262] ata6.00: 3907029168 sectors, multi 1: LBA48 NCQ (depth 0/32)
[    2.610276] ata6.00: configured for UDMA/133
[    2.610364] scsi 5:0:0:0: Direct-Access     ATA      WDC WD20EARS-00M 51.0 PQ: 0 ANSI: 5
[    2.610549] sd 5:0:0:0: Attached scsi generic sg3 type 0
[    2.610665] sd 5:0:0:0: [sdd] 3907029168 512-byte logical blocks: (2.00 TB/1.81 TiB)
[    2.610715] sd 5:0:0:0: [sdd] Write Protect is off
[    2.610719] sd 5:0:0:0: [sdd] Mode Sense: 00 3a 00 00
[    2.610741] sd 5:0:0:0: [sdd] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[    2.960030] ata8: SATA link down (SStatus 0 SControl 310)
[    3.005154]  sdd: sdd1
[    3.005412] sd 5:0:0:0: [sdd] Attached SCSI disk
[    3.310032] ata9: SATA link down (SStatus 0 SControl 310)
[    3.546409] xor: automatically using best checksumming function: generic_sse
[    3.590012]    generic_sse:  6596.000 MB/sec
[    3.590014] xor: using function: generic_sse (6596.000 MB/sec)
[    3.650031] ata10: SATA link down (SStatus 0 SControl 310)
[    3.676172] device-mapper: dm-raid45: initialized v0.2594b
[    3.732980] [drm] radeon defaulting to kernel modesetting.
[    3.732984] [drm] radeon kernel modesetting enabled.

 

 

EDIT: Må igjen si at jeg setter stor pris på alle innspill :=)

Endret 5. august 2011 av Mr. Purple