Gå til innhold

opl75

Medlemmer
  • Innlegg

    38
  • Ble med

  • Besøkte siden sist

Innlegg skrevet av opl75

  1. Ser at komplett har xp2400 på tilbud til 995kr.

    Har lyst å bytte ut min gamle t-bird 1333 med knust core,

    men vil den fungere på KG7? (Støtter offisielt til xp2000).

     

    Har lest om enkelte som har fått det til.

     

    Hvis det går, trenger jeg ny kjøler?

     

    Har Taisol CGK760 kjøler.

  2. Du har rett Spaz:

     

    Not all BIOS's are the same especially when it comes to being able to unlock your processor multiplier setting. You will need to wait for the 1003 version that will unlock your cpu. Present, December 2002 BIOS versions available from ASUS do not give you that facility. But then it will not unlock all AMD Athlon XP processors either

     

    http://www.a1-electronics.co.uk/AMD_Sectio...A7N8X_pg2.shtml

  3. Utdrag fra test på anandtech:

     

    Using a factory locked Athlon XP 2400+ processor, all we had to do was simply lower the CPU multiplier down to 8X and increase the FSB as high as we possibly could without jeopardizing stability and without increasing voltages. This was made possible by a great feature the ASUS A7N8X Deluxe affords (as do all nForce2 motherboards), and that's the ability to adjust the CPU multiplier in the BIOS without having to do physical modification to the CPU. Therefore, all you have to do is install your multiplier-locked Athlon XP CPU into your nForce2 motherboard and voila; you can adjust all the available multipliers to your heart's content. However, make sure you purchase the right type of Athlon XP; only Thoroughbred-B processors have this capability on nForce2 motherboards. You cannot change the multiplier of a locked Palomino or Thoroughbred-A processor in any of the six nForce2 motherboards being reviewed today.

     

    Her er testen: http://www.anandtech.com/mb/showdoc.html?i=1759

  4. Jeg prøvde først spillet med alt på max på 1280x1024x32.

    Det gikk rimelig flytende de første ti sek. deretter begynte det å hakke ca hvert sek., og ikke hele tiden.

    Stillte så ned world detail ett hakk, og da gikk det

    flytende.

     

    Lurer på om det kan være driveravhengig.

     

    Forskjellen på de to world detail settingene er trilinear og ansiotropic filtering.

     

    Kjører T-bird 1333,gf4200,512 RAM,win98se,det.30.82.

  5. hei.

     

    Pga. cd standaren blir platene gjenkjent som 650 eller 700MB uansett.

     

    Det du må gjøre er å gå inn på expert features og enable overburn, sette maks tid til feks. 92min og brenne i disc at once.

     

    Ellers kan du søke i hjelpefilen på Nero etter overburning for å finne ut mer.

     

    Håper dette hjelpte deg.

×
×
  • Opprett ny...