Gå til innhold

7.04 finner ikke dvdrommen min.


Anbefalte innlegg

Skrevet

Hei.

 

Etter å ha installert 7.04, og bootet systemet, klarer jeg ikke å mounte dvd romen min.

 

(IDE, ingen jumpers - fungerte fint med en gang i 6.10)

 

I 6.10 havnet cdromen under /dev/cdrom, og ble automatisk mountet. /dev/cdrom eksisterer ikke lenger...?

 

Finner heller ingenting som heter /dev/hdX hvor cdromen eventuelt kunne ha ligget (noen som foreslo dette på et annet forum).

 

Finner ikke ubuntu dvd romen i det hele tatt?

 

Som dere ser, har jeg hatt lite erfaring med dette problemet, og har lite peiling på hva jeg kan gjøre :innocent:

 

Hvis noen har et forslag å komme med, setter jeg stor pris på det.

 

Mvh.

Videoannonse
Annonse
Skrevet
Hei.

 

Etter å ha installert 7.04, og bootet systemet, klarer jeg ikke å mounte dvd romen min.

 

(IDE, ingen jumpers - fungerte fint med en gang i 6.10)

 

I 6.10 havnet cdromen under /dev/cdrom, og ble automatisk mountet. /dev/cdrom eksisterer ikke lenger...?

 

Finner heller ingenting som heter /dev/hdX hvor cdromen eventuelt kunne ha ligget (noen som foreslo dette på et annet forum).

 

Finner ikke ubuntu dvd romen i det hele tatt?

 

Som dere ser, har jeg hatt lite erfaring med dette problemet, og har lite peiling på hva jeg kan gjøre  :innocent:

 

Hvis noen har et forslag å komme med, setter jeg stor pris på det.

 

Mvh.

8526533[/snapback]

 

Har du oppdatert fra 6.10?

Skrevet
Har oppdatert, ja. Glemte å nevne det.

8526720[/snapback]

 

 

Du må antagelig legge til dvdrom manuelt. søk på ubuntu forumet, det er flere der som har samme feilen.

Skrevet

Takk for svar.

 

Har søkt gjennom ubuntuforums en god stund nå, men uten at det har resulterte i noe som har hjulpet meg.

 

Legge den til selv? Du kunne ikke sagt noe mer om hva det innebærer.

 

Ellers får jeg nok bare fortsette å søke..

Skrevet

Problemet er at "cdrom" ikke eksisterer under /dev/

 

Ved å kjøre fdisk -l får jeg følgende (ser at de gjorde det i en av trådene du linket til - er det noe her som er av nytte å vite i denne sammnehengen?)

 

Disk /dev/sda: 203.9 GB, 203928109056 bytes

255 heads, 63 sectors/track, 24792 cylinders

Units = cylinders of 16065 * 512 = 8225280 bytes

 

  Device Boot      Start        End      Blocks  Id  System

/dev/sda1              1      24415  196113456  83  Linux

/dev/sda2          24416      24792    3028252+  5  Extended

/dev/sda5          24416      24792    3028221  82  Linux swap / Solaris

 

Disk /dev/sdb: 320.0 GB, 320072933376 bytes

255 heads, 63 sectors/track, 38913 cylinders

Units = cylinders of 16065 * 512 = 8225280 bytes

 

  Device Boot      Start        End      Blocks  Id  System

/dev/sdb1              1      38757  311315571  83  Linux

 

Disk /dev/sdc: 200.0 GB, 200049647616 bytes

255 heads, 63 sectors/track, 24321 cylinders

Units = cylinders of 16065 * 512 = 8225280 bytes

 

  Device Boot      Start        End      Blocks  Id  System

/dev/sdc1  *          1        5124    41158498+  83  Linux

/dev/sdc2          23945      24321    3028252+  5  Extended

/dev/sdc3            5125      23944  151171650  83  Linux

/dev/sdc5          23945      24321    3028221  82  Linux swap / Solaris

Skrevet (endret)

/dev/cdrom er jo bare en symlenke i alle tilfelle... Tja, får vi se lsmod | grep cdrom (evt. lsmod | grep ide) ?

 

dmesg?

Endret av comicz
Skrevet

lsmod | grep cdrom gir ingenting

 

lsmod | grep ide gir: "video 16388 0 "

 

dmesg gir

 

Klikk for å se/fjerne innholdet nedenfor
[ 25.049713] ENABLING IO-APIC IRQs

[ 25.049874] ..TIMER: vector=0x31 apic1=0 pin1=2 apic2=-1 pin2=-1

[ 25.196954] checking TSC synchronization across 2 CPUs: passed.

[ 0.003995] Brought up 2 CPUs

[ 0.104423] migration_cost=36

[ 0.104620] Booting paravirtualized kernel on bare hardware

[ 0.104677] Time: 8:56:19 Date: 04/03/107

[ 0.104697] NET: Registered protocol family 16

[ 0.104758] EISA bus registered

[ 0.104762] ACPI: bus type pci registered

[ 0.104869] PCI: PCI BIOS revision 3.00 entry at 0xf0031, last bus=5

[ 0.104871] PCI: Using configuration type 1

[ 0.104872] Setting up standard PCI resources

[ 0.118419] ACPI: Interpreter enabled

[ 0.118421] ACPI: Using IOAPIC for interrupt routing

[ 0.118986] ACPI: PCI Root Bridge [PCI0] (0000:00)

[ 0.118992] PCI: Probing PCI hardware (bus 00)

[ 0.119683] PCI quirk: region 0800-087f claimed by ICH6 ACPI/GPIO/TCO

[ 0.119686] PCI quirk: region 0480-04bf claimed by ICH6 GPIO

[ 0.119824] Boot video device is 0000:01:00.0

[ 0.120364] PCI: Transparent bridge - 0000:00:1e.0

[ 0.120416] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]

[ 0.137917] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P2._PRT]

[ 0.138163] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P1._PRT]

[ 0.142137] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P4._PRT]

[ 0.142709] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P7._PRT]

[ 0.142956] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P8._PRT]

[ 0.145786] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 10 *11 12 14 15)

[ 0.146010] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 *5 6 7 10 11 12 14 15)

[ 0.146232] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 7 10 11 12 14 *15)

[ 0.146454] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 *10 11 12 14 15)

[ 0.146674] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled.

[ 0.146896] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 10 *11 12 14 15)

[ 0.147117] ACPI: PCI Interrupt Link [LNKG] (IRQs *3 4 5 6 7 10 11 12 14 15)

[ 0.147341] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 7 10 11 12 *14 15)

[ 0.147433] Linux Plug and Play Support v0.97 © Adam Belay

[ 0.147440] pnp: PnP ACPI init

[ 0.151237] pnp: PnP ACPI: found 15 devices

[ 0.151240] PnPBIOS: Disabled by ACPI PNP

[ 0.151275] PCI: Using ACPI for IRQ routing

[ 0.151277] PCI: If a device doesn't work, try "pci=routeirq". If it helps, post a report

[ 0.160763] NET: Registered protocol family 8

[ 0.160764] NET: Registered protocol family 20

[ 0.161367] pnp: 00:08: ioport range 0x290-0x297 has been reserved

[ 0.161595] PCI: Bridge: 0000:00:01.0

[ 0.161597] IO window: a000-afff

[ 0.161600] MEM window: fa700000-fe7fffff

[ 0.161603] PREFETCH window: bfe00000-dfdfffff

[ 0.161606] PCI: Bridge: 0000:00:1c.0

[ 0.161607] IO window: disabled.

[ 0.161610] MEM window: disabled.

[ 0.161613] PREFETCH window: dfe00000-dfefffff

[ 0.161617] PCI: Bridge: 0000:00:1c.3

[ 0.161618] IO window: disabled.

[ 0.161622] MEM window: fe900000-fe9fffff

[ 0.161625] PREFETCH window: disabled.

[ 0.161629] PCI: Bridge: 0000:00:1c.4

[ 0.161631] IO window: b000-bfff

[ 0.161635] MEM window: fe800000-fe8fffff

[ 0.161637] PREFETCH window: disabled.

[ 0.161641] PCI: Bridge: 0000:00:1e.0

[ 0.161643] IO window: c000-cfff

[ 0.161647] MEM window: fea00000-feafffff

[ 0.161650] PREFETCH window: disabled.

[ 0.161661] ACPI: PCI Interrupt 0000:00:01.0[A] -> GSI 16 (level, low) -> IRQ 16

[ 0.161665] PCI: Setting latency timer of device 0000:00:01.0 to 64

[ 0.161679] ACPI: PCI Interrupt 0000:00:1c.0[A] -> GSI 16 (level, low) -> IRQ 16

[ 0.161683] PCI: Setting latency timer of device 0000:00:1c.0 to 64

[ 0.161697] ACPI: PCI Interrupt 0000:00:1c.3[D] -> GSI 19 (level, low) -> IRQ 17

[ 0.161701] PCI: Setting latency timer of device 0000:00:1c.3 to 64

[ 0.161714] ACPI: PCI Interrupt 0000:00:1c.4[A] -> GSI 16 (level, low) -> IRQ 16

[ 0.161718] PCI: Setting latency timer of device 0000:00:1c.4 to 64

[ 0.161727] PCI: Setting latency timer of device 0000:00:1e.0 to 64

[ 0.161745] NET: Registered protocol family 2

[ 0.220068] IP route cache hash table entries: 32768 (order: 5, 131072 bytes)

[ 0.220161] TCP established hash table entries: 131072 (order: 8, 1048576 bytes)

[ 0.220563] TCP bind hash table entries: 65536 (order: 7, 524288 bytes)

[ 0.220738] TCP: Hash tables configured (established 131072 bind 65536)

[ 0.220740] TCP reno registered

[ 0.236215] checking if image is initramfs... it is

[ 0.724027] Freeing initrd memory: 6750k freed

[ 0.724482] audit: initializing netlink socket (disabled)

[ 0.724494] audit(1178182579.396:1): initialized

[ 0.724565] highmem bounce pool size: 64 pages

[ 0.724626] VFS: Disk quotas dquot_6.5.1

[ 0.724640] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)

[ 0.724676] io scheduler noop registered

[ 0.724678] io scheduler anticipatory registered

[ 0.724680] io scheduler deadline registered

[ 0.724688] io scheduler cfq registered (default)

[ 0.892982] PCI: Setting latency timer of device 0000:00:01.0 to 64

[ 0.893016] assign_interrupt_mode Found MSI capability

[ 0.893019] Allocate Port Service[0000:00:01.0:pcie00]

[ 0.893099] PCI: Setting latency timer of device 0000:00:1c.0 to 64

[ 0.893133] assign_interrupt_mode Found MSI capability

[ 0.893135] Allocate Port Service[0000:00:1c.0:pcie00]

[ 0.893160] Allocate Port Service[0000:00:1c.0:pcie02]

[ 0.893235] PCI: Setting latency timer of device 0000:00:1c.3 to 64

[ 0.893268] assign_interrupt_mode Found MSI capability

[ 0.893270] Allocate Port Service[0000:00:1c.3:pcie00]

[ 0.893293] Allocate Port Service[0000:00:1c.3:pcie02]

[ 0.893367] PCI: Setting latency timer of device 0000:00:1c.4 to 64

[ 0.893401] assign_interrupt_mode Found MSI capability

[ 0.893402] Allocate Port Service[0000:00:1c.4:pcie00]

[ 0.893425] Allocate Port Service[0000:00:1c.4:pcie02]

[ 0.893545] isapnp: Scanning for PnP cards...

[ 1.245924] isapnp: No Plug & Play device found

[ 1.261830] Real Time Clock Driver v1.12ac

[ 1.261951] hpet_resources: 0xfed00000 is busy

[ 1.261966] Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing enabled

[ 1.262069] serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A

[ 1.262503] 00:06: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A

[ 1.262669] mice: PS/2 mouse device common for all mice

[ 1.263094] RAMDISK driver initialized: 16 RAM disks of 65536K size 1024 blocksize

[ 1.263258] input: Macintosh mouse button emulation as /class/input/input0

[ 1.263285] Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2

[ 1.263288] ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx

[ 1.263468] PNP: No PS/2 controller found. Probing ports directly.

[ 1.266068] serio: i8042 KBD port at 0x60,0x64 irq 1

[ 1.266071] serio: i8042 AUX port at 0x60,0x64 irq 12

[ 1.266156] EISA: Probing bus 0 at eisa.0

[ 1.266181] EISA: Detected 0 cards.

[ 1.296271] TCP cubic registered

[ 1.296278] NET: Registered protocol family 1

[ 1.296318] Starting balanced_irq

[ 1.296323] Using IPI No-Shortcut mode

[ 1.296405] ACPI: (supports S0 S1 S3 S4 S5)

[ 1.296441] Magic number: 7:953:926

[ 1.296473] hash matches device ptyxb

[ 1.296611] Freeing unused kernel memory: 328k freed

[ 1.298334] Time: tsc clocksource has been installed.

[ 2.454938] Capability LSM initialized

[ 2.484833] ACPI (exconfig-0455): Dynamic SSDT Load - OemId [ AMI] OemTableId [ CPU1PM] [20060707]

[ 2.485220] ACPI (exconfig-0455): Dynamic SSDT Load - OemId [ AMI] OemTableId [ CPU2PM] [20060707]

[ 2.485305] ACPI Exception (acpi_processor-0677): AE_NOT_FOUND, Processor Device is not present [20060707]

[ 2.485312] ACPI Exception (acpi_processor-0677): AE_NOT_FOUND, Processor Device is not present [20060707]

[ 2.745172] usbcore: registered new interface driver usbfs

[ 2.745190] usbcore: registered new interface driver hub

[ 2.745206] usbcore: registered new device driver usb

[ 2.745778] USB Universal Host Controller Interface driver v3.0

[ 2.745809] ACPI: PCI Interrupt 0000:00:1a.0[A] -> GSI 16 (level, low) -> IRQ 16

[ 2.745818] PCI: Setting latency timer of device 0000:00:1a.0 to 64

[ 2.745821] uhci_hcd 0000:00:1a.0: UHCI Host Controller

[ 2.745907] uhci_hcd 0000:00:1a.0: new USB bus registered, assigned bus number 1

[ 2.745931] uhci_hcd 0000:00:1a.0: irq 16, io base 0x0000e000

[ 2.746007] usb usb1: configuration #1 chosen from 1 choice

[ 2.746025] hub 1-0:1.0: USB hub found

[ 2.746029] hub 1-0:1.0: 2 ports detected

[ 2.792208] ieee1394: Initialized config rom entry `ip1394'

[ 2.797989] SCSI subsystem initialized

[ 2.801717] libata version 2.20 loaded.

[ 2.824033] Floppy drive(s): fd0 is 1.44M

[ 2.843978] FDC 0 is a post-1991 82077

[ 2.849125] ACPI: PCI Interrupt 0000:00:1a.1 -> GSI 17 (level, low) -> IRQ 18

[ 2.849135] PCI: Setting latency timer of device 0000:00:1a.1 to 64

[ 2.849138] uhci_hcd 0000:00:1a.1: UHCI Host Controller

[ 2.849157] uhci_hcd 0000:00:1a.1: new USB bus registered, assigned bus number 2

[ 2.849181] uhci_hcd 0000:00:1a.1: irq 18, io base 0x0000e080

[ 2.849251] usb usb2: configuration #1 chosen from 1 choice

[ 2.849272] hub 2-0:1.0: USB hub found

[ 2.849276] hub 2-0:1.0: 2 ports detected

[ 2.953621] ACPI: PCI Interrupt 0000:00:1a.7[C] -> GSI 18 (level, low) -> IRQ 19

[ 2.953638] PCI: Setting latency timer of device 0000:00:1a.7 to 64

[ 2.953642] ehci_hcd 0000:00:1a.7: EHCI Host Controller

[ 2.953667] ehci_hcd 0000:00:1a.7: new USB bus registered, assigned bus number 3

[ 2.953694] ehci_hcd 0000:00:1a.7: debug port 1

[ 2.953700] PCI: cache line size of 32 is not supported by device 0000:00:1a.7

[ 2.953708] ehci_hcd 0000:00:1a.7: irq 19, io mem 0xfebff400

[ 2.957594] ehci_hcd 0000:00:1a.7: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004

[ 2.957656] usb usb3: configuration #1 chosen from 1 choice

[ 2.957675] hub 3-0:1.0: USB hub found

[ 2.957680] hub 3-0:1.0: 4 ports detected

[ 3.062498] ACPI: PCI Interrupt 0000:00:1d.7[A] -> GSI 23 (level, low) -> IRQ 20

[ 3.062509] PCI: Setting latency timer of device 0000:00:1d.7 to 64

[ 3.062513] ehci_hcd 0000:00:1d.7: EHCI Host Controller

[ 3.062537] ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 4

[ 3.062564] ehci_hcd 0000:00:1d.7: debug port 1

[ 3.062569] PCI: cache line size of 32 is not supported by device 0000:00:1d.7

[ 3.062577] ehci_hcd 0000:00:1d.7: irq 20, io mem 0xfebff000

[ 3.066462] ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004

[ 3.066515] usb usb4: configuration #1 chosen from 1 choice

[ 3.066532] hub 4-0:1.0: USB hub found

[ 3.066536] hub 4-0:1.0: 6 ports detected

[ 3.171717] ACPI: PCI Interrupt 0000:05:03.0[A] -> GSI 21 (level, low) -> IRQ 21

[ 3.172483] ACPI: PCI Interrupt 0000:00:1d.0[A] -> GSI 23 (level, low) -> IRQ 20

[ 3.172490] PCI: Setting latency timer of device 0000:00:1d.0 to 64

[ 3.172493] uhci_hcd 0000:00:1d.0: UHCI Host Controller

[ 3.172512] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 5

[ 3.172532] uhci_hcd 0000:00:1d.0: irq 20, io base 0x0000d800

[ 3.172598] usb usb5: configuration #1 chosen from 1 choice

[ 3.172617] hub 5-0:1.0: USB hub found

[ 3.172621] hub 5-0:1.0: 2 ports detected

[ 3.224402] ohci1394: fw-host0: OHCI-1394 1.0 (PCI): IRQ=[21] MMIO=[feaff800-feafffff] Max Packet=[2048] IR/IT contexts=[4/8]

[ 3.279579] ACPI: PCI Interrupt 0000:00:1d.1 -> GSI 19 (level, low) -> IRQ 17

[ 3.279589] PCI: Setting latency timer of device 0000:00:1d.1 to 64

[ 3.279593] uhci_hcd 0000:00:1d.1: UHCI Host Controller

[ 3.279616] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 6

[ 3.279640] uhci_hcd 0000:00:1d.1: irq 17, io base 0x0000d880

[ 3.279719] usb usb6: configuration #1 chosen from 1 choice

[ 3.279753] hub 6-0:1.0: USB hub found

[ 3.279757] hub 6-0:1.0: 2 ports detected

[ 3.379948] ACPI: PCI Interrupt 0000:00:1d.2[C] -> GSI 18 (level, low) -> IRQ 19

[ 3.379954] PCI: Setting latency timer of device 0000:00:1d.2 to 64

[ 3.379957] uhci_hcd 0000:00:1d.2: UHCI Host Controller

[ 3.379973] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 7

[ 3.379993] uhci_hcd 0000:00:1d.2: irq 19, io base 0x0000dc00

[ 3.380055] usb usb7: configuration #1 chosen from 1 choice

[ 3.380072] hub 7-0:1.0: USB hub found

[ 3.380076] hub 7-0:1.0: 2 ports detected

[ 3.487484] ACPI: PCI Interrupt 0000:02:00.1 -> GSI 17 (level, low) -> IRQ 18

[ 3.487502] PCI: Setting latency timer of device 0000:02:00.1 to 64

[ 3.487794] ata1: PATA max UDMA/100 cmd 0x0001bc00 ctl 0x0001b882 bmdma 0x0001b400 irq 18

[ 3.487819] ata2: PATA max UDMA/100 cmd 0x0001b800 ctl 0x0001b482 bmdma 0x0001b408 irq 18

[ 3.487829] scsi0 : pata_jmicron

[ 3.645703] scsi1 : pata_jmicron

[ 3.778715] usb 5-1: new low speed USB device using uhci_hcd and address 2

[ 3.814189] ATA: abnormal status 0x7F on port 0x0001b807

[ 3.814287] ahci 0000:00:1f.2: version 2.1

[ 3.814302] ACPI: PCI Interrupt 0000:00:1f.2 -> GSI 19 (level, low) -> IRQ 17

[ 4.106455] usb 5-1: configuration #1 chosen from 1 choice

[ 4.358390] usb 6-1: new low speed USB device using uhci_hcd and address 2

[ 4.503455] ieee1394: Host added: ID:BUS[0-00:1023] GUID[0011d80000ebc3ad]

[ 4.538161] usb 6-1: configuration #1 chosen from 1 choice

[ 4.541182] usbcore: registered new interface driver hiddev

[ 4.601869] input: Logitech HID compliant keyboard as /class/input/input1

[ 4.601879] input: USB HID v1.10 Keyboard [Logitech HID compliant keyboard] on usb-0000:00:1d.0-1

[ 4.723668] input: Logitech HID compliant keyboard as /class/input/input2

[ 4.723676] input: USB HID v1.10 Device [Logitech HID compliant keyboard] on usb-0000:00:1d.0-1

[ 4.738899] input: Razer Razer Diamondback Optical Mouse as /class/input/input3

[ 4.738917] input: USB HID v1.10 Mouse [Razer Razer Diamondback Optical Mouse] on usb-0000:00:1d.1-1

[ 4.738927] usbcore: registered new interface driver usbhid

[ 4.738929] drivers/usb/input/hid-core.c: v2.6:USB HID core driver

[ 4.817696] PCI: Setting latency timer of device 0000:00:1f.2 to 64

[ 4.817704] ahci 0000:00:1f.2: AHCI 0001.0100 32 slots 6 ports 3 Gbps 0x3f impl SATA mode

[ 4.817707] ahci 0000:00:1f.2: flags: 64bit ncq ilck stag pm led clo pmp pio slum part

[ 4.817773] ata3: SATA max UDMA/133 cmd 0xf8832900 ctl 0x00000000 bmdma 0x00000000 irq 17

[ 4.817829] ata4: SATA max UDMA/133 cmd 0xf8832980 ctl 0x00000000 bmdma 0x00000000 irq 17

[ 4.817885] ata5: SATA max UDMA/133 cmd 0xf8832a00 ctl 0x00000000 bmdma 0x00000000 irq 17

[ 4.817945] ata6: SATA max UDMA/133 cmd 0xf8832a80 ctl 0x00000000 bmdma 0x00000000 irq 17

[ 4.817990] ata7: SATA max UDMA/133 cmd 0xf8832b00 ctl 0x00000000 bmdma 0x00000000 irq 17

[ 4.818036] ata8: SATA max UDMA/133 cmd 0xf8832b80 ctl 0x00000000 bmdma 0x00000000 irq 17

[ 4.818042] scsi2 : ahci

[ 5.305018] ata3: SATA link up 1.5 Gbps (SStatus 113 SControl 300)

[ 5.307129] ata3.00: ata_hpa_resize 1: sectors = 398297088, hpa_sectors = 398297088

[ 5.307133] ata3.00: ATA-7: Maxtor 6L200M0, BACE1G10, max UDMA/133

[ 5.307136] ata3.00: 398297088 sectors, multi 0: LBA48 NCQ (depth 31/32)

[ 5.310119] ata3.00: ata_hpa_resize 1: sectors = 398297088, hpa_sectors = 398297088

[ 5.310122] ata3.00: configured for UDMA/133

[ 5.310129] scsi3 : ahci

[ 5.796462] ata4: SATA link up 1.5 Gbps (SStatus 113 SControl 300)

[ 5.797481] ata4.00: ata_hpa_resize 1: sectors = 625142448, hpa_sectors = 625142448

[ 5.797484] ata4.00: ATA-6: WDC WD3200JD-00KLB0, 08.05J08, max UDMA/100

[ 5.797487] ata4.00: 625142448 sectors, multi 0: LBA48

[ 5.798561] ata4.00: ata_hpa_resize 1: sectors = 625142448, hpa_sectors = 625142448

[ 5.798564] ata4.00: configured for UDMA/100

[ 5.798570] scsi4 : ahci

[ 6.110671] ata5: SATA link down (SStatus 0 SControl 300)

[ 6.110679] scsi5 : ahci

[ 6.420453] ata6: SATA link down (SStatus 0 SControl 300)

[ 6.420461] scsi6 : ahci

[ 7.016703] ata7: SATA link up 1.5 Gbps (SStatus 113 SControl 300)

[ 7.020388] ata7.00: ata_hpa_resize 1: sectors = 390721968, hpa_sectors = 390721968

[ 7.020391] ata7.00: ATA-6: ST3200822AS, 3.01, max UDMA/133

[ 7.020393] ata7.00: 390721968 sectors, multi 0: LBA48

[ 7.024126] ata7.00: ata_hpa_resize 1: sectors = 390721968, hpa_sectors = 390721968

[ 7.024129] ata7.00: configured for UDMA/133

[ 7.024135] scsi7 : ahci

[ 7.334786] ata8: SATA link down (SStatus 0 SControl 300)

[ 7.334881] scsi 2:0:0:0: Direct-Access ATA Maxtor 6L200M0 BACE PQ: 0 ANSI: 5

[ 7.335625] scsi 3:0:0:0: Direct-Access ATA WDC WD3200JD-00K 08.0 PQ: 0 ANSI: 5

[ 7.337300] scsi 6:0:0:0: Direct-Access ATA ST3200822AS 3.01 PQ: 0 ANSI: 5

[ 7.338468] ACPI: PCI Interrupt 0000:02:00.0[A] -> GSI 16 (level, low) -> IRQ 16

[ 8.337586] PCI: Setting latency timer of device 0000:02:00.0 to 64

[ 8.337593] ahci 0000:02:00.0: AHCI 0001.0000 32 slots 2 ports 3 Gbps 0x3 impl SATA mode

[ 8.337596] ahci 0000:02:00.0: flags: 64bit ncq pm led clo pmp pio slum part

[ 8.337652] ata9: SATA max UDMA/133 cmd 0xf89c0100 ctl 0x00000000 bmdma 0x00000000 irq 16

[ 8.337707] ata10: SATA max UDMA/133 cmd 0xf89c0180 ctl 0x00000000 bmdma 0x00000000 irq 16

[ 8.337713] scsi8 : ahci

[ 8.652061] ata9: SATA link down (SStatus 0 SControl 300)

[ 8.652073] scsi9 : ahci

[ 8.961840] ata10: SATA link down (SStatus 0 SControl 300)

[ 8.969614] SCSI device sda: 398297088 512-byte hdwr sectors (203928 MB)

[ 8.969624] sda: Write Protect is off

[ 8.969626] sda: Mode Sense: 00 3a 00 00

[ 8.969637] SCSI device sda: write cache: enabled, read cache: enabled, doesn't support DPO or FUA

[ 8.969671] SCSI device sda: 398297088 512-byte hdwr sectors (203928 MB)

[ 8.969678] sda: Write Protect is off

[ 8.969680] sda: Mode Sense: 00 3a 00 00

[ 8.969690] SCSI device sda: write cache: enabled, read cache: enabled, doesn't support DPO or FUA

[ 8.969693] sda: sda1 sda2 < sda5 >

[ 9.012634] sd 2:0:0:0: Attached scsi disk sda

[ 9.012682] SCSI device sdb: 625142448 512-byte hdwr sectors (320073 MB)

[ 9.012700] sdb: Write Protect is off

[ 9.012701] sdb: Mode Sense: 00 3a 00 00

[ 9.012712] SCSI device sdb: write cache: enabled, read cache: enabled, doesn't support DPO or FUA

[ 9.012739] SCSI device sdb: 625142448 512-byte hdwr sectors (320073 MB)

[ 9.012747] sdb: Write Protect is off

[ 9.012749] sdb: Mode Sense: 00 3a 00 00

[ 9.012759] SCSI device sdb: write cache: enabled, read cache: enabled, doesn't support DPO or FUA

[ 9.012761] sdb: sdb1

[ 9.024686] sd 3:0:0:0: Attached scsi disk sdb

[ 9.024716] SCSI device sdc: 390721968 512-byte hdwr sectors (200050 MB)

[ 9.024723] sdc: Write Protect is off

[ 9.024724] sdc: Mode Sense: 00 3a 00 00

[ 9.024735] SCSI device sdc: write cache: enabled, read cache: enabled, doesn't support DPO or FUA

[ 9.024760] SCSI device sdc: 390721968 512-byte hdwr sectors (200050 MB)

[ 9.024767] sdc: Write Protect is off

[ 9.024769] sdc: Mode Sense: 00 3a 00 00

[ 9.024779] SCSI device sdc: write cache: enabled, read cache: enabled, doesn't support DPO or FUA

[ 9.024781] sdc: sdc1 sdc2 < sdc5 > sdc3

[ 9.060984] sd 6:0:0:0: Attached scsi disk sdc

[ 9.063980] sd 2:0:0:0: Attached scsi generic sg0 type 0

[ 9.063996] sd 3:0:0:0: Attached scsi generic sg1 type 0

[ 9.064011] sd 6:0:0:0: Attached scsi generic sg2 type 0

[ 9.205638] Attempting manual resume

[ 9.205640] swsusp: Resume From Partition 8:37

[ 9.205642] PM: Checking swsusp image.

[ 9.205828] PM: Resume from disk failed.

[ 9.237581] kjournald starting. Commit interval 5 seconds

[ 9.237593] EXT3-fs: mounted filesystem with ordered data mode.

[ 17.891267] pci_hotplug: PCI Hot Plug PCI Core version: 0.5

[ 17.892706] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4

[ 18.004794] iTCO_vendor_support: vendor-support=0

[ 18.005643] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.01 (11-Nov-2006)

[ 18.005711] iTCO_wdt: Found a ICH8 or ICH8R TCO device (Version=2, TCOBASE=0x0860)

[ 18.005748] iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0)

[ 18.129369] Linux agpgart interface v0.102 © Dave Jones

[ 18.154128] agpgart: Detected an Intel 965G Chipset.

[ 18.166085] agpgart: AGP aperture is 256M @ 0x0

[ 18.277000] input: PC Speaker as /class/input/input4

[ 18.338172] usbcore: registered new interface driver xpad

[ 18.338176] drivers/usb/input/xpad.c: driver for Xbox controllers v0.1.6

[ 18.408438] Attansic L1 Ethernet Network Driver - version 2.0.6

[ 18.408440] Copyright© 2005-2006 Attansic Corporation.

[ 18.408483] ACPI: PCI Interrupt 0000:03:00.0[A] -> GSI 19 (level, low) -> IRQ 17

[ 18.408492] PCI: Setting latency timer of device 0000:03:00.0 to 64

[ 18.459277] parport: PnPBIOS parport detected.

[ 18.459378] parport0: PC-style at 0x378 (0x778), irq 7, dma 3 [PCSPP,TRISTATE,COMPAT,EPP,ECP,DMA]

[ 18.480086] nvidia: module license 'NVIDIA' taints kernel.

[ 18.761754] ACPI: PCI Interrupt 0000:01:00.0[A] -> GSI 16 (level, low) -> IRQ 16

[ 18.761762] PCI: Setting latency timer of device 0000:01:00.0 to 64

[ 18.761831] NVRM: loading NVIDIA Linux x86 Kernel Module 1.0-9631 Thu Nov 9 17:38:10 PST 2006

[ 18.771355] atl1 0000:03:00.0: Unable to enable MSI: -22

[ 18.892387] ACPI: PCI Interrupt 0000:00:1b.0[A] -> GSI 22 (level, low) -> IRQ 22

[ 18.892402] PCI: Setting latency timer of device 0000:00:1b.0 to 64

[ 19.392570] lp0: using parport0 (interrupt-driven).

[ 19.427622] Adding 3028212k swap on /dev/disk/by-uuid/44d73a72-b0c5-4382-893f-7c2b1aaeba8e. Priority:-1 extents:1 across:3028212k

[ 19.471463] EXT3 FS on sdc1, internal journal

[ 19.607842] kjournald starting. Commit interval 5 seconds

[ 19.607851] EXT3-fs warning: maximal mount count reached, running e2fsck is recommended

[ 19.608001] EXT3 FS on sda1, internal journal

[ 19.608006] EXT3-fs: mounted filesystem with ordered data mode.

[ 19.621469] kjournald starting. Commit interval 5 seconds

[ 19.621478] EXT3-fs warning: mounting fs with errors, running e2fsck is recommended

[ 19.621783] EXT3 FS on sdb1, internal journal

[ 19.621787] EXT3-fs: mounted filesystem with ordered data mode.

[ 19.640381] kjournald starting. Commit interval 5 seconds

[ 19.640388] EXT3-fs warning: maximal mount count reached, running e2fsck is recommended

[ 19.640596] EXT3 FS on sdc3, internal journal

[ 19.640610] EXT3-fs: mounted filesystem with ordered data mode.

[ 19.909039] NET: Registered protocol family 17

[ 20.266831] atl1: eth0 link is up 100 Mbps full duplex

[ 23.240561] NET: Registered protocol family 10

[ 23.240627] lo: Disabled Privacy Extensions

[ 25.952263] input: Power Button (FF) as /class/input/input5

[ 25.952288] ACPI: Power Button (FF) [PWRF]

[ 25.952341] input: Power Button (CM) as /class/input/input6

[ 25.952354] ACPI: Power Button (CM) [PWRB]

[ 25.985867] Using specific hotkey driver

[ 26.019360] No dock devices found.

[ 26.049871] ibm_acpi: ec object not found

[ 26.148306] pcc_acpi: loading...

[ 31.824582] **WARNING** I2C adapter driver [NVIDIA i2c adapter 0 at 1:00.0] forgot to specify physical device; fix it!

[ 31.824622] **WARNING** I2C adapter driver [NVIDIA i2c adapter 1 at 1:00.0] forgot to specify physical device; fix it!

[ 31.824640] **WARNING** I2C adapter driver [NVIDIA i2c adapter 2 at 1:00.0] forgot to specify physical device; fix it!

[ 32.205886] ppdev: user-space parallel port driver

[ 32.745400] apm: BIOS version 1.2 Flags 0x03 (Driver version 1.16ac)

[ 32.745404] apm: disabled - APM is not SMP safe.

[ 32.987651] Installing knfsd (copyright © 1996 [email protected]).

[ 33.088945] NFSD: Using /var/lib/nfs/v4recovery as the NFSv4 state recovery directory

[ 33.089177] NFSD: starting 90-second grace period

[ 33.647998] eth0: no IPv6 routers present

[ 35.819914] vboxdrv: Trying to deactivate NMI watchdog permanently...

[ 35.819918] vboxdrv: Successfully done.

[ 36.319832] Bluetooth: Core ver 2.11

[ 36.319957] NET: Registered protocol family 31

[ 36.319960] Bluetooth: HCI device and connection manager initialized

[ 36.319963] Bluetooth: HCI socket layer initialized

[ 36.331796] Bluetooth: L2CAP ver 2.8

[ 36.331800] Bluetooth: L2CAP socket layer initialized

[ 36.489275] Bluetooth: RFCOMM socket layer initialized

[ 36.489283] Bluetooth: RFCOMM TTY layer initialized

[ 36.489285] Bluetooth: RFCOMM ver 1.8

[ 286.716101] atl1: hw csum wrong pkt_flag:1600, err_flag:80

[ 352.147187] atl1: hw csum wrong pkt_flag:1600, err_flag:80

[ 370.322605] atl1: hw csum wrong pkt_flag:1600, err_flag:80

[ 395.629828] atl1: hw csum wrong pkt_flag:1600, err_flag:80

[ 449.547656] atl1: hw csum wrong pkt_flag:1600, err_flag:80

[ 524.151363] atl1: hw csum wrong pkt_flag:1600, err_flag:80

[ 593.911793] atl1: hw csum wrong pkt_flag:1600, err_flag:80

[ 597.962015] atl1: hw csum wrong pkt_flag:1600, err_flag:80

[ 633.626467] atl1: hw csum wrong pkt_flag:1600, err_flag:80

[ 670.601885] atl1: hw csum wrong pkt_flag:1600, err_flag:80

[ 672.076478] atl1: hw csum wrong pkt_flag:1600, err_flag:80

[ 672.106720] atl1: hw csum wrong pkt_flag:1600, err_flag:80

[ 710.973911] atl1: hw csum wrong pkt_flag:1600, err_flag:80

[ 765.852848] atl1: hw csum wrong pkt_flag:1600, err_flag:80

[ 779.328534] atl1: hw csum wrong pkt_flag:1600, err_flag:80

[ 840.227209] atl1: hw csum wrong pkt_flag:1600, err_flag:80

[ 958.350797] atl1: hw csum wrong pkt_flag:1600, err_flag:80

[ 985.079756] atl1: hw csum wrong pkt_flag:1600, err_flag:80

[ 1035.721426] atl1: hw csum wrong pkt_flag:1600, err_flag:80

[ 1197.855659] atl1: hw csum wrong pkt_flag:1600, err_flag:80

[ 1200.346687] atl1: hw csum wrong pkt_flag:1600, err_flag:80

[ 1263.802583] atl1: hw csum wrong pkt_flag:1600, err_flag:80

[ 1264.934260] atl1: hw csum wrong pkt_flag:1600, err_flag:80

[ 1712.972893] atl1: hw csum wrong pkt_flag:1600, err_flag:80

[ 2628.352829] atl1: hw csum wrong pkt_flag:1600, err_flag:80

[ 2633.556561] atl1: hw csum wrong pkt_flag:1600, err_flag:80

[ 2642.486758] atl1: hw csum wrong pkt_flag:1600, err_flag:80

[ 2642.843316] atl1: hw csum wrong pkt_flag:1600, err_flag:80

[ 2656.425540] atl1: hw csum wrong pkt_flag:1600, err_flag:80

[ 2664.553655] atl1: hw csum wrong pkt_flag:1600, err_flag:80

[ 2669.010587] atl1: hw csum wrong pkt_flag:1600, err_flag:80

[ 2672.383953] atl1: hw csum wrong pkt_flag:1600, err_flag:80

[ 2699.090027] atl1: hw csum wrong pkt_flag:1600, err_flag:80

[ 2703.676377] atl1: hw csum wrong pkt_flag:1600, err_flag:80

[ 2709.525620] atl1: hw csum wrong pkt_flag:1600, err_flag:80

[ 2712.506396] atl1: hw csum wrong pkt_flag:1600, err_flag:80

[ 2721.833192] atl1: hw csum wrong pkt_flag:1600, err_flag:80

[ 2723.409411] atl1: hw csum wrong pkt_flag:1600, err_flag:80

[ 2732.788149] atl1: hw csum wrong pkt_flag:1600, err_flag:80

[ 2733.812559] atl1: hw csum wrong pkt_flag:1600, err_flag:80

[ 2734.561012] atl1: hw csum wrong pkt_flag:1600, err_flag:80

[ 2739.550570] atl1: hw csum wrong pkt_flag:1600, err_flag:80

[ 2740.683702] atl1: hw csum wrong pkt_flag:1600, err_flag:80

[ 2742.827044] atl1: hw csum wrong pkt_flag:1600, err_flag:80

[ 2745.301475] atl1: hw csum wrong pkt_flag:1600, err_flag:80

[ 2763.169273] atl1: hw csum wrong pkt_flag:1600, err_flag:80

[ 2776.747996] atl1: hw csum wrong pkt_flag:1600, err_flag:80

[ 2777.055032] atl1: hw csum wrong pkt_flag:1600, err_flag:80

[ 2802.871576] atl1: hw csum wrong pkt_flag:1600, err_flag:80

[ 2810.602236] atl1: hw csum wrong pkt_flag:1600, err_flag:80

[ 2812.618671] atl1: hw csum wrong pkt_flag:1600, err_flag:80

[ 2821.547973] atl1: hw csum wrong pkt_flag:1600, err_flag:80

[ 2821.584697] atl1: hw csum wrong pkt_flag:1600, err_flag:80

[ 2823.692128] atl1: hw csum wrong pkt_flag:1600, err_flag:80

[ 2828.527438] atl1: hw csum wrong pkt_flag:1600, err_flag:80

[ 2829.306537] atl1: hw csum wrong pkt_flag:1600, err_flag:80

[ 2831.182552] atl1: hw csum wrong pkt_flag:1600, err_flag:80

[ 2844.258359] atl1: hw csum wrong pkt_flag:1600, err_flag:80

[ 2851.138516] atl1: hw csum wrong pkt_flag:1600, err_flag:80

[ 2852.564913] EXT3-fs error (device sdb1): ext3_readdir: bad entry in directory #31343000: rec_len % 4 != 0 - offset=0, inode=3259243750, rec_len=54753, name_len=129

[ 2853.531670] atl1: hw csum wrong pkt_flag:1600, err_flag:80

[ 2868.266097] atl1: hw csum wrong pkt_flag:1600, err_flag:80

[ 2872.639370] atl1: hw csum wrong pkt_flag:1600, err_flag:80

[ 2875.783688] atl1: hw csum wrong pkt_flag:1600, err_flag:80

[ 2881.941559] atl1: hw csum wrong pkt_flag:1600, err_flag:80

[ 2886.280485] atl1: hw csum wrong pkt_flag:1600, err_flag:80

[ 2890.370657] atl1: hw csum wrong pkt_flag:1600, err_flag:80

[ 2902.336324] atl1: hw csum wrong pkt_flag:1600, err_flag:80

[ 2904.647163] atl1: hw csum wrong pkt_flag:1600, err_flag:80

[ 2913.261762] atl1: hw csum wrong pkt_flag:1600, err_flag:80

[ 2918.880680] atl1: hw csum wrong pkt_flag:1600, err_flag:80

[ 2961.854989] atl1: hw csum wrong pkt_flag:1600, err_flag:80

[ 2963.798098] atl1: hw csum wrong pkt_flag:1600, err_flag:80

[ 2966.117462] atl1: hw csum wrong pkt_flag:1600, err_flag:80

[ 2977.247251] atl1: hw csum wrong pkt_flag:1600, err_flag:80

[ 2981.817166] atl1: hw csum wrong pkt_flag:1600, err_flag:80

[ 2984.253462] atl1: hw csum wrong pkt_flag:1600, err_flag:80

[ 2998.261122] atl1: hw csum wrong pkt_flag:1600, err_flag:80

[ 2998.309626] atl1: hw csum wrong pkt_flag:1600, err_flag:80

[ 3047.484288] atl1: hw csum wrong pkt_flag:1600, err_flag:80

[ 3048.031134] atl1: hw csum wrong pkt_flag:1600, err_flag:80

[ 3048.990115] atl1: hw csum wrong pkt_flag:1600, err_flag:80

[ 3056.757327] atl1: hw csum wrong pkt_flag:1600, err_flag:80

[ 3059.950499] atl1: hw csum wrong pkt_flag:1600, err_flag:80

[ 3060.514048] atl1: hw csum wrong pkt_flag:1600, err_flag:80

[ 3064.823655] atl1: hw csum wrong pkt_flag:1600, err_flag:80

[ 3071.346691] atl1: hw csum wrong pkt_flag:1600, err_flag:80

[ 3075.326196] atl1: hw csum wrong pkt_flag:1600, err_flag:80

[ 3080.250775] atl1: hw csum wrong pkt_flag:1600, err_flag:80

[ 3090.837881] atl1: hw csum wrong pkt_flag:1600, err_flag:80

[ 3094.172663] atl1: hw csum wrong pkt_flag:1600, err_flag:80

[ 3100.774448] atl1: hw csum wrong pkt_flag:1600, err_flag:80

[ 3101.141938] atl1: hw csum wrong pkt_flag:1600, err_flag:80

[ 3105.369924] atl1: hw csum wrong pkt_flag:1600, err_flag:80

[ 3115.857948] atl1: hw csum wrong pkt_flag:1600, err_flag:80

[ 3120.966666] atl1: hw csum wrong pkt_flag:1600, err_flag:80

[ 3130.167537] atl1: hw csum wrong pkt_flag:1600, err_flag:80

[ 3130.921248] atl1: hw csum wrong pkt_flag:1600, err_flag:80

[ 3152.705169] atl1: hw csum wrong pkt_flag:1600, err_flag:80

[ 3159.102419] atl1: hw csum wrong pkt_flag:1600, err_flag:80

[ 3218.733149] EXT3-fs error (device sdb1): ext3_readdir: bad entry in directory #31343000: rec_len % 4 != 0 - offset=0, inode=3259243750, rec_len=54753, name_len=129

[ 4197.274979] atl1: hw csum wrong pkt_flag:e00, err_flag:80

[17394.893022] atl1: hw csum wrong pkt_flag:e00, err_flag:80

[22192.451574] atl1: hw csum wrong pkt_flag:e00, err_flag:80

Opprett en konto eller logg inn for å kommentere

Du må være et medlem for å kunne skrive en kommentar

Opprett konto

Det er enkelt å melde seg inn for å starte en ny konto!

Start en konto

Logg inn

Har du allerede en konto? Logg inn her.

Logg inn nå
  • Hvem er aktive   0 medlemmer

    • Ingen innloggede medlemmer aktive
×
×
  • Opprett ny...