Gå til innhold

Er disken moden for utskiftning?


Anbefalte innlegg

Hei!

Kjører for tiden 4 stk 3TB WD Red i en selvbygget filserver med OpenMediaVault. Nå har det begynnt å dukke opp slike meldinger i S.M.A.R.T loggen:

Sitat

Jul 04 18:08:28 server smartd[14360]: Device: /dev/disk/by-id/ata-WDC_WD30EFRX-68AX9N0_WD-WMC1T2611253 [SAT], 15 Currently unreadable (pending) sectors

Da jeg først så det, bestillte jeg en ny 3TB disk, som forsåvidt har ankommet. Men før den ankom tok jeg ut disken det gjelder, satt den i en USB3 dockingstasjon å kjørte både kort og lang S.M.A.R.T test via WD Data Lifeguard diagnostic for windows. Disken bestod begge testene og programmet rapporterte ikke om noen feil, og det er her jeg begynner å lure litt...

Er disken på vei til å dø nå snart, eller er det OpenMediaVault som kuker seg på no vis? Kan jo mistenke SATA porten og eller kabelen også, men da skulle det vel ikke stått noe om dårlige sektorer...? Eller..?

Det står forøvrig 4stk samsungdisker også i serveren, disse har også røde prikker på seg ang. S.M.A.R.T feil. ("Device has a few bad sectors") Men de dukker ikke opp i loggen slik som WD disken gjør.

disker.jpg

Lenke til kommentar
Videoannonse
Annonse
Sitat

smartctl 6.6 2017-11-05 r4594 [x86_64-linux-5.5.0-0.bpo.2-amd64] (local build)
Copyright (C) 2002-17, Bruce Allen, Christian Franke, www.smartmontools.org

=== START OF INFORMATION SECTION ===
Model Family:     Western Digital Red
Device Model:     WDC WD30EFRX-68AX9N0
Serial Number:    WD-WMC1T2611253
LU WWN Device Id: 5 0014ee 6032dd1d9
Firmware Version: 80.00A80
User Capacity:    3,000,592,982,016 bytes [3.00 TB]
Sector Sizes:     512 bytes logical, 4096 bytes physical
Device is:        In smartctl database [for details use: -P show]
ATA Version is:   ACS-2 (minor revision not indicated)
SATA Version is:  SATA 3.0, 6.0 Gb/s (current: 3.0 Gb/s)
Local Time is:    Mon Jul  6 01:34:30 2020 CEST
SMART support is: Available - device has SMART capability.
SMART support is: Enabled
AAM feature is:   Unavailable
APM feature is:   Unavailable
Rd look-ahead is: Enabled
Write cache is:   Enabled
DSN feature is:   Unavailable
ATA Security is:  Disabled, frozen [SEC2]
Wt Cache Reorder: Enabled

=== START OF READ SMART DATA SECTION ===
SMART overall-health self-assessment test result: PASSED

General SMART Values:
Offline data collection status:  (0x82)    Offline data collection activity
                    was completed without error.
                    Auto Offline Data Collection: Enabled.
Self-test execution status:      (   0)    The previous self-test routine completed
                    without error or no self-test has ever
                    been run.
Total time to complete Offline
data collection:         (40020) seconds.
Offline data collection
capabilities:              (0x7b) SMART execute Offline immediate.
                    Auto Offline data collection on/off support.
                    Suspend Offline collection upon new
                    command.
                    Offline surface scan supported.
                    Self-test supported.
                    Conveyance Self-test supported.
                    Selective Self-test supported.
SMART capabilities:            (0x0003)    Saves SMART data before entering
                    power-saving mode.
                    Supports SMART auto save timer.
Error logging capability:        (0x01)    Error logging supported.
                    General Purpose Logging supported.
Short self-test routine
recommended polling time:      (   2) minutes.
Extended self-test routine
recommended polling time:      ( 401) minutes.
Conveyance self-test routine
recommended polling time:      (   5) minutes.
SCT capabilities:            (0x70bd)    SCT Status supported.
                    SCT Error Recovery Control supported.
                    SCT Feature Control supported.
                    SCT Data Table supported.

SMART Attributes Data Structure revision number: 16
Vendor Specific SMART Attributes with Thresholds:
ID# ATTRIBUTE_NAME          FLAGS    VALUE WORST THRESH FAIL RAW_VALUE
  1 Raw_Read_Error_Rate     POSR-K   200   200   051    -    0
  3 Spin_Up_Time            POS--K   182   177   021    -    5866
  4 Start_Stop_Count        -O--CK   100   100   000    -    153
  5 Reallocated_Sector_Ct   PO--CK   200   200   140    -    0
  7 Seek_Error_Rate         -OSR-K   100   253   000    -    0
  9 Power_On_Hours          -O--CK   016   016   000    -    61935
 10 Spin_Retry_Count        -O--CK   100   100   000    -    0
 11 Calibration_Retry_Count -O--CK   100   100   000    -    0
 12 Power_Cycle_Count       -O--CK   100   100   000    -    142
192 Power-Off_Retract_Count -O--CK   200   200   000    -    112
193 Load_Cycle_Count        -O--CK   200   200   000    -    40
194 Temperature_Celsius     -O---K   123   091   000    -    27
196 Reallocated_Event_Count -O--CK   200   200   000    -    0
197 Current_Pending_Sector  -O--CK   200   200   000    -    15
198 Offline_Uncorrectable   ----CK   200   200   000    -    0
199 UDMA_CRC_Error_Count    -O--CK   200   200   000    -    0
200 Multi_Zone_Error_Rate   ---R--   200   200   000    -    0
                            ||||||_ K auto-keep
                            |||||__ C event count
                            ||||___ R error rate
                            |||____ S speed/performance
                            ||_____ O updated online
                            |______ P prefailure warning

General Purpose Log Directory Version 1
SMART           Log Directory Version 1 [multi-sector log support]
Address    Access  R/W   Size  Description
0x00       GPL,SL  R/O      1  Log Directory
0x01           SL  R/O      1  Summary SMART error log
0x02           SL  R/O      5  Comprehensive SMART error log
0x03       GPL     R/O      6  Ext. Comprehensive SMART error log
0x06           SL  R/O      1  SMART self-test log
0x07       GPL     R/O      1  Extended self-test log
0x09           SL  R/W      1  Selective self-test log
0x10       GPL     R/O      1  NCQ Command Error log
0x11       GPL     R/O      1  SATA Phy Event Counters log
0x21       GPL     R/O      1  Write stream error log
0x22       GPL     R/O      1  Read stream error log
0x80-0x9f  GPL,SL  R/W     16  Host vendor specific log
0xa0-0xa7  GPL,SL  VS      16  Device vendor specific log
0xa8-0xb7  GPL,SL  VS       1  Device vendor specific log
0xbd       GPL,SL  VS       1  Device vendor specific log
0xc0       GPL,SL  VS       1  Device vendor specific log
0xc1       GPL     VS      93  Device vendor specific log
0xe0       GPL,SL  R/W      1  SCT Command/Status
0xe1       GPL,SL  R/W      1  SCT Data Transfer

SMART Extended Comprehensive Error Log Version: 1 (6 sectors)
No Errors Logged

SMART Extended Self-test Log Version: 1 (1 sectors)
Num  Test_Description    Status                  Remaining  LifeTime(hours)  LBA_of_first_error
# 1  Short offline       Completed without error       00%     61918         -
# 2  Short offline       Completed without error       00%     61838         -
# 3  Conveyance offline  Completed without error       00%     61813         -
# 4  Conveyance offline  Completed without error       00%     21226         -

SMART Selective self-test log data structure revision number 1
 SPAN  MIN_LBA  MAX_LBA  CURRENT_TEST_STATUS
    1        0        0  Not_testing
    2        0        0  Not_testing
    3        0        0  Not_testing
    4        0        0  Not_testing
    5        0        0  Not_testing
Selective self-test flags (0x0):
  After scanning selected spans, do NOT read-scan remainder of disk.
If Selective self-test is pending on power-up, resume after 0 minute delay.

SCT Status Version:                  3
SCT Version (vendor specific):       258 (0x0102)
SCT Support Level:                   1
Device State:                        Active (0)
Current Temperature:                    27 Celsius
Power Cycle Min/Max Temperature:     22/28 Celsius
Lifetime    Min/Max Temperature:     17/59 Celsius
Under/Over Temperature Limit Count:   0/0
Vendor specific:
01 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00

SCT Temperature History Version:     2
Temperature Sampling Period:         1 minute
Temperature Logging Interval:        1 minute
Min/Max recommended Temperature:      0/60 Celsius
Min/Max Temperature Limit:           -41/85 Celsius
Temperature History Size (Index):    478 (284)

Index    Estimated Time   Temperature Celsius
 285    2020-07-05 17:37    27  ********
 ...    ..(130 skipped).    ..  ********
 416    2020-07-05 19:48    27  ********
 417    2020-07-05 19:49    26  *******
 ...    ..( 24 skipped).    ..  *******
 442    2020-07-05 20:14    26  *******
 443    2020-07-05 20:15    27  ********
 ...    ..( 35 skipped).    ..  ********
   1    2020-07-05 20:51    27  ********
   2    2020-07-05 20:52    26  *******
 ...    ..( 21 skipped).    ..  *******
  24    2020-07-05 21:14    26  *******
  25    2020-07-05 21:15    27  ********
 ...    ..( 31 skipped).    ..  ********
  57    2020-07-05 21:47    27  ********
  58    2020-07-05 21:48    26  *******
 ...    ..( 30 skipped).    ..  *******
  89    2020-07-05 22:19    26  *******
  90    2020-07-05 22:20    27  ********
 ...    ..( 44 skipped).    ..  ********
 135    2020-07-05 23:05    27  ********
 136    2020-07-05 23:06    26  *******
 ...    ..( 39 skipped).    ..  *******
 176    2020-07-05 23:46    26  *******
 177    2020-07-05 23:47    27  ********
 ...    ..(  3 skipped).    ..  ********
 181    2020-07-05 23:51    27  ********
 182    2020-07-05 23:52    26  *******
 183    2020-07-05 23:53    27  ********
 ...    ..( 32 skipped).    ..  ********
 216    2020-07-06 00:26    27  ********
 217    2020-07-06 00:27    26  *******
 ...    ..( 28 skipped).    ..  *******
 246    2020-07-06 00:56    26  *******
 247    2020-07-06 00:57    27  ********
 ...    ..( 36 skipped).    ..  ********
 284    2020-07-06 01:34    27  ********

SCT Error Recovery Control:
           Read:     70 (7.0 seconds)
          Write:     70 (7.0 seconds)

Device Statistics (GP/SMART Log 0x04) not supported

Pending Defects log (GP Log 0x0c) not supported

SATA Phy Event Counters (GP Log 0x11)
ID      Size     Value  Description
0x0001  2            0  Command failed due to ICRC error
0x0002  2            0  R_ERR response for data FIS
0x0003  2            0  R_ERR response for device-to-host data FIS
0x0004  2            0  R_ERR response for host-to-device data FIS
0x0005  2            0  R_ERR response for non-data FIS
0x0006  2            0  R_ERR response for device-to-host non-data FIS
0x0007  2            0  R_ERR response for host-to-device non-data FIS
0x0008  2            0  Device-to-host non-data FIS retries
0x0009  2            3  Transition from drive PhyRdy to drive PhyNRdy
0x000a  2            3  Device-to-host register FISes sent due to a COMRESET
0x000b  2            0  CRC errors within host-to-device FIS
0x000f  2            0  R_ERR response for host-to-device data FIS, CRC
0x0012  2            0  R_ERR response for host-to-device non-data FIS, CRC
0x8000  4       351182  Vendor specific

 

Lenke til kommentar

Opprett en konto eller logg inn for å kommentere

Du må være et medlem for å kunne skrive en kommentar

Opprett konto

Det er enkelt å melde seg inn for å starte en ny konto!

Start en konto

Logg inn

Har du allerede en konto? Logg inn her.

Logg inn nå
×
×
  • Opprett ny...